@article{12875, abstract = {The superior colliculus (SC) in the mammalian midbrain is essential for multisensory integration and is composed of a rich diversity of excitatory and inhibitory neurons and glia. However, the developmental principles directing the generation of SC cell-type diversity are not understood. Here, we pursued systematic cell lineage tracing in silico and in vivo, preserving full spatial information, using genetic mosaic analysis with double markers (MADM)-based clonal analysis with single-cell sequencing (MADM-CloneSeq). The analysis of clonally related cell lineages revealed that radial glial progenitors (RGPs) in SC are exceptionally multipotent. Individual resident RGPs have the capacity to produce all excitatory and inhibitory SC neuron types, even at the stage of terminal division. While individual clonal units show no pre-defined cellular composition, the establishment of appropriate relative proportions of distinct neuronal types occurs in a PTEN-dependent manner. Collectively, our findings provide an inaugural framework at the single-RGP/-cell level of the mammalian SC ontogeny.}, author = {Cheung, Giselle T and Pauler, Florian and Koppensteiner, Peter and Krausgruber, Thomas and Streicher, Carmen and Schrammel, Martin and Özgen, Natalie Y and Ivec, Alexis and Bock, Christoph and Shigemoto, Ryuichi and Hippenmeyer, Simon}, issn = {0896-6273}, journal = {Neuron}, number = {2}, pages = {230--246.e11}, publisher = {Elsevier}, title = {{Multipotent progenitors instruct ontogeny of the superior colliculus}}, doi = {10.1016/j.neuron.2023.11.009}, volume = {112}, year = {2024}, } @article{14793, abstract = {Superconductor/semiconductor hybrid devices have attracted increasing interest in the past years. Superconducting electronics aims to complement semiconductor technology, while hybrid architectures are at the forefront of new ideas such as topological superconductivity and protected qubits. In this work, we engineer the induced superconductivity in two-dimensional germanium hole gas by varying the distance between the quantum well and the aluminum. We demonstrate a hard superconducting gap and realize an electrically and flux tunable superconducting diode using a superconducting quantum interference device (SQUID). This allows to tune the current phase relation (CPR), to a regime where single Cooper pair tunneling is suppressed, creating a sin(2y) CPR. Shapiro experiments complement this interpretation and the microwave drive allows to create a diode with ≈ 100% efficiency. The reported results open up the path towards integration of spin qubit devices, microwave resonators and (protected) superconducting qubits on the same silicon technology compatible platform.}, author = {Valentini, Marco and Sagi, Oliver and Baghumyan, Levon and de Gijsel, Thijs and Jung, Jason and Calcaterra, Stefano and Ballabio, Andrea and Aguilera Servin, Juan L and Aggarwal, Kushagra and Janik, Marian and Adletzberger, Thomas and Seoane Souto, Rubén and Leijnse, Martin and Danon, Jeroen and Schrade, Constantin and Bakkers, Erik and Chrastina, Daniel and Isella, Giovanni and Katsaros, Georgios}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Parity-conserving Cooper-pair transport and ideal superconducting diode in planar germanium}}, doi = {10.1038/s41467-023-44114-0}, volume = {15}, year = {2024}, } @article{14843, abstract = {The coupling between Ca2+ channels and release sensors is a key factor defining the signaling properties of a synapse. However, the coupling nanotopography at many synapses remains unknown, and it is unclear how it changes during development. To address these questions, we examined coupling at the cerebellar inhibitory basket cell (BC)-Purkinje cell (PC) synapse. Biophysical analysis of transmission by paired recording and intracellular pipette perfusion revealed that the effects of exogenous Ca2+ chelators decreased during development, despite constant reliance of release on P/Q-type Ca2+ channels. Structural analysis by freeze-fracture replica labeling (FRL) and transmission electron microscopy (EM) indicated that presynaptic P/Q-type Ca2+ channels formed nanoclusters throughout development, whereas docked vesicles were only clustered at later developmental stages. Modeling suggested a developmental transformation from a more random to a more clustered coupling nanotopography. Thus, presynaptic signaling developmentally approaches a point-to-point configuration, optimizing speed, reliability, and energy efficiency of synaptic transmission.}, author = {Chen, JingJing and Kaufmann, Walter and Chen, Chong and Arai, Itaru and Kim, Olena and Shigemoto, Ryuichi and Jonas, Peter M}, issn = {1097-4199}, journal = {Neuron}, publisher = {Elsevier}, title = {{Developmental transformation of Ca2+ channel-vesicle nanotopography at a central GABAergic synapse}}, doi = {10.1016/j.neuron.2023.12.002}, year = {2024}, } @misc{12370, abstract = {Statistics of natural scenes are not uniform - their structure varies dramatically from ground to sky. It remains unknown whether these non-uniformities are reflected in the large-scale organization of the early visual system and what benefits such adaptations would confer. Here, by relying on the efficient coding hypothesis, we predict that changes in the structure of receptive fields across visual space increase the efficiency of sensory coding. We show experimentally that, in agreement with our predictions, receptive fields of retinal ganglion cells change their shape along the dorsoventral retinal axis, with a marked surround asymmetry at the visual horizon. Our work demonstrates that, according to principles of efficient coding, the panoramic structure of natural scenes is exploited by the retina across space and cell-types. }, author = {Gupta, Divyansh and Sumser, Anton L and Jösch, Maximilian A}, publisher = {Institute of Science and Technology Austria}, title = {{Research Data for: Panoramic visual statistics shape retina-wide organization of receptive fields}}, doi = {10.15479/AT:ISTA:12370}, year = {2023}, } @phdthesis{12470, abstract = {The brain is an exceptionally sophisticated organ consisting of billions of cells and trillions of connections that orchestrate our cognition and behavior. To decode its complex connectivity, it is pivotal to disentangle its intricate architecture spanning from cm-sized circuits down to tens of nm-small synapses. To achieve this goal, I developed CATS – Comprehensive Analysis of nervous Tissue across Scales, a versatile toolbox for obtaining a holistic view of nervous tissue context with (superresolution) fluorescence microscopy. CATS combines comprehensive labeling of the extracellular space, that is compatible with chemical fixation, with information on molecular markers, superresolved data acquisition and machine-learning based data analysis for segmentation and synapse identification. I used CATS to analyze key features of nervous tissue connectivity, ranging from whole tissue architecture, neuronal in- and output-fields, down to synapse morphology. Focusing on the hippocampal circuitry, I quantified synaptic transmission properties of mossy fiber boutons and analyzed the connectivity pattern of dentate gyrus granule cells with CA3 pyramidal neurons. This shows that CATS is a viable tool to study hallmarks of neuronal connectivity with light microscopy.}, author = {Michalska, Julia M}, isbn = { 978-3-99078-026-8}, issn = {2663-337X}, pages = {201}, publisher = {Institute of Science and Technology Austria}, title = {{A versatile toolbox for the comprehensive analysis of nervous tissue organization with light microscopy}}, doi = {10.15479/at:ista:12470}, year = {2023}, } @phdthesis{12716, abstract = {The process of detecting and evaluating sensory information to guide behaviour is termed perceptual decision-making (PDM), and is critical for the ability of an organism to interact with its external world. Individuals with autism, a neurodevelopmental condition primarily characterised by social and communication difficulties, frequently exhibit altered sensory processing and PDM difficulties are widely reported. Recent technological advancements have pushed forward our understanding of the genetic changes accompanying this condition, however our understanding of how these mutations affect the function of specific neuronal circuits and bring about the corresponding behavioural changes remains limited. Here, we use an innate PDM task, the looming avoidance response (LAR) paradigm, to identify a convergent behavioural abnormality across three molecularly distinct genetic mouse models of autism (Cul3, Setd5 and Ptchd1). Although mutant mice can rapidly detect threatening visual stimuli, their responses are consistently delayed, requiring longer to initiate an appropriate response than their wild-type siblings. Mutant animals show abnormal adaptation in both their stimulus- evoked escape responses and exploratory dynamics following repeated stimulus presentations. Similarly delayed behavioural responses are observed in wild-type animals when faced with more ambiguous threats, suggesting the mutant phenotype could arise from a dysfunction in the flexible control of this PDM process. Our knowledge of the core neuronal circuitry mediating the LAR facilitated a detailed dissection of the neuronal mechanisms underlying the behavioural impairment. In vivo extracellular recording revealed that visual responses were unaffected within a key brain region for the rapid processing of visual threats, the superior colliculus (SC), indicating that the behavioural delay was unlikely to originate from sensory impairments. Delayed behavioural responses were recapitulated in the Setd5 model following optogenetic stimulation of the excitatory output neurons of the SC, which are known to mediate escape initiation through the activation of cells in the underlying dorsal periaqueductal grey (dPAG). In vitro patch-clamp recordings of dPAG cells uncovered a stark hypoexcitability phenotype in two out of the three genetic models investigated (Setd5 and Ptchd1), that in Setd5, is mediated by the misregulation of voltage-gated potassium channels. Overall, our results show that the ability to use visual information to drive efficient escape responses is impaired in three diverse genetic mouse models of autism and that, in one of the models studied, this behavioural delay likely originates from differences in the intrinsic excitability of a key subcortical node, the dPAG. Furthermore, this work showcases the use of an innate behavioural paradigm to mechanistically dissect PDM processes in autism.}, author = {Burnett, Laura}, issn = {2663-337X}, pages = {178}, publisher = {Institute of Science and Technology Austria}, title = {{To flee, or not to flee? Using innate defensive behaviours to investigate rapid perceptual decision-making through subcortical circuits in mouse models of autism}}, doi = {10.15479/at:ista:12716}, year = {2023}, } @phdthesis{12726, abstract = {Most motions of many-body systems at any scale in nature with sufficient degrees of freedom tend to be chaotic; reaching from the orbital motion of planets, the air currents in our atmosphere, down to the water flowing through our pipelines or the movement of a population of bacteria. To the observer it is therefore intriguing when a moving collective exhibits order. Collective motion of flocks of birds, schools of fish or swarms of self-propelled particles or robots have been studied extensively over the past decades but the mechanisms involved in the transition from chaos to order remain unclear. Here, the interactions, that in most systems give rise to chaos, sustain order. In this thesis we investigate mechanisms that preserve, destabilize or lead to the ordered state. We show that endothelial cells migrating in circular confinements transition to a collective rotating state and concomitantly synchronize the frequencies of nucleating actin waves within individual cells. Consequently, the frequency dependent cell migration speed uniformizes across the population. Complementary to the WAVE dependent nucleation of traveling actin waves, we show that in leukocytes the actin polymerization depending on WASp generates pushing forces locally at stationary patches. Next, in pipe flows, we study methods to disrupt the self–sustaining cycle of turbulence and therefore relaminarize the flow. While we find in pulsating flow conditions that turbulence emerges through a helical instability during the decelerating phase. Finally, we show quantitatively in brain slices of mice that wild-type control neurons can compensate the migratory deficits of a genetically modified neuronal sub–population in the developing cortex.}, author = {Riedl, Michael}, issn = {2663-337X}, pages = {260}, publisher = {Institute of Science and Technology Austria}, title = {{Synchronization in collectively moving active matter}}, doi = {10.15479/at:ista:12726}, year = {2023}, } @article{12789, abstract = {Experiments have shown that charge distributions of granular materials are non-Gaussian, with broad tails that indicate many particles with high charge. This observation has consequences for the behavior of granular materials in many settings, and may bear relevance to the underlying charge transfer mechanism. However, there is the unaddressed possibility that broad tails arise due to experimental uncertainties, as determining the shapes of tails is nontrivial. Here we show that measurement uncertainties can indeed account for most of the tail broadening previously observed. The clue that reveals this is that distributions are sensitive to the electric field at which they are measured; ones measured at low (high) fields have larger (smaller) tails. Accounting for sources of uncertainty, we reproduce this broadening in silico. Finally, we use our results to back out the true charge distribution without broadening, which we find is still non-Guassian, though with substantially different behavior at the tails and indicating significantly fewer highly charged particles. These results have implications in many natural settings where electrostatic interactions, especially among highly charged particles, strongly affect granular behavior.}, author = {Mujica, Nicolás and Waitukaitis, Scott R}, issn = {2470-0053}, journal = {Physical Review E}, number = {3}, publisher = {American Physical Society}, title = {{Accurate determination of the shapes of granular charge distributions}}, doi = {10.1103/PhysRevE.107.034901}, volume = {107}, year = {2023}, } @misc{12817, abstract = {3D-reconstruction of living brain tissue down to individual synapse level would create opportunities for decoding the dynamics and structure-function relationships of the brain’s complex and dense information processing network. However, it has been hindered by insufficient 3D-resolution, inadequate signal-to-noise-ratio, and prohibitive light burden in optical imaging, whereas electron microscopy is inherently static. Here we solved these challenges by developing an integrated optical/machine learning technology, LIONESS (Live Information-Optimized Nanoscopy Enabling Saturated Segmentation). It leverages optical modifications to stimulated emission depletion (STED) microscopy in comprehensively, extracellularly labelled tissue and prior information on sample structure via machine learning to simultaneously achieve isotropic super-resolution, high signal-to-noise-ratio, and compatibility with living tissue. This allows dense deep-learning-based instance segmentation and 3D-reconstruction at synapse level incorporating molecular, activity, and morphodynamic information. LIONESS opens up avenues for studying the dynamic functional (nano-)architecture of living brain tissue.}, author = {Danzl, Johann G}, publisher = {Institute of Science and Technology Austria}, title = {{Research data for the publication "Dense 4D nanoscale reconstruction of living brain tissue"}}, doi = {10.15479/AT:ISTA:12817}, year = {2023}, } @phdthesis{12897, abstract = {Inverse design problems in fabrication-aware shape optimization are typically solved on discrete representations such as polygonal meshes. This thesis argues that there are benefits to treating these problems in the same domain as human designers, namely, the parametric one. One reason is that discretizing a parametric model usually removes the capability of making further manual changes to the design, because the human intent is captured by the shape parameters. Beyond this, knowledge about a design problem can sometimes reveal a structure that is present in a smooth representation, but is fundamentally altered by discretizing. In this case, working in the parametric domain may even simplify the optimization task. We present two lines of research that explore both of these aspects of fabrication-aware shape optimization on parametric representations. The first project studies the design of plane elastic curves and Kirchhoff rods, which are common mathematical models for describing the deformation of thin elastic rods such as beams, ribbons, cables, and hair. Our main contribution is a characterization of all curved shapes that can be attained by bending and twisting elastic rods having a stiffness that is allowed to vary across the length. Elements like these can be manufactured using digital fabrication devices such as 3d printers and digital cutters, and have applications in free-form architecture and soft robotics. We show that the family of curved shapes that can be produced this way admits geometric description that is concise and computationally convenient. In the case of plane curves, the geometric description is intuitive enough to allow a designer to determine whether a curved shape is physically achievable by visual inspection alone. We also present shape optimization algorithms that convert a user-defined curve in the plane or in three dimensions into the geometry of an elastic rod that will naturally deform to follow this curve when its endpoints are attached to a support structure. Implemented in an interactive software design tool, the rod geometry is generated in real time as the user edits a curve and enables fast prototyping. The second project tackles the problem of general-purpose shape optimization on CAD models using a novel variant of the extended finite element method (XFEM). Our goal is the decoupling between the simulation mesh and the CAD model, so no geometry-dependent meshing or remeshing needs to be performed when the CAD parameters change during optimization. This is achieved by discretizing the embedding space of the CAD model, and using a new high-accuracy numerical integration method to enable XFEM on free-form elements bounded by the parametric surface patches of the model. Our simulation is differentiable from the CAD parameters to the simulation output, which enables us to use off-the-shelf gradient-based optimization procedures. The result is a method that fits seamlessly into the CAD workflow because it works on the same representation as the designer, enabling the alternation of manual editing and fabrication-aware optimization at will.}, author = {Hafner, Christian}, isbn = {978-3-99078-031-2}, issn = {2663-337X}, pages = {180}, publisher = {Institute of Science and Technology Austria}, title = {{Inverse shape design with parametric representations: Kirchhoff Rods and parametric surface models}}, doi = {10.15479/at:ista:12897}, year = {2023}, } @phdthesis{12900, abstract = {About a 100 years ago, we discovered that our universe is inherently noisy, that is, measuring any physical quantity with a precision beyond a certain point is not possible because of an omnipresent inherent noise. We call this - the quantum noise. Certain physical processes allow this quantum noise to get correlated in conjugate physical variables. These quantum correlations can be used to go beyond the potential of our inherently noisy universe and obtain a quantum advantage over the classical applications. Quantum noise being inherent also means that, at the fundamental level, the physical quantities are not well defined and therefore, objects can stay in multiple states at the same time. For example, the position of a particle not being well defined means that the particle is in multiple positions at the same time. About 4 decades ago, we started exploring the possibility of using objects which can be in multiple states at the same time to increase the dimensionality in computation. Thus, the field of quantum computing was born. We discovered that using quantum entanglement, a property closely related to quantum correlations, can be used to speed up computation of certain problems, such as factorisation of large numbers, faster than any known classical algorithm. Thus began the pursuit to make quantum computers a reality. Till date, we have explored quantum control over many physical systems including photons, spins, atoms, ions and even simple circuits made up of superconducting material. However, there persists one ubiquitous theme. The more readily a system interacts with an external field or matter, the more easily we can control it. But this also means that such a system can easily interact with a noisy environment and quickly lose its coherence. Consequently, such systems like electron spins need to be protected from the environment to ensure the longevity of their coherence. Other systems like nuclear spins are naturally protected as they do not interact easily with the environment. But, due to the same reason, it is harder to interact with such systems. After decades of experimentation with various systems, we are convinced that no one type of quantum system would be the best for all the quantum applications. We would need hybrid systems which are all interconnected - much like the current internet where all sorts of devices can all talk to each other - but now for quantum devices. A quantum internet. Optical photons are the best contenders to carry information for the quantum internet. They can carry quantum information cheaply and without much loss - the same reasons which has made them the backbone of our current internet. Following this direction, many systems, like trapped ions, have already demonstrated successful quantum links over a large distances using optical photons. However, some of the most promising contenders for quantum computing which are based on microwave frequencies have been left behind. This is because high energy optical photons can adversely affect fragile low-energy microwave systems. In this thesis, we present substantial progress on this missing quantum link between microwave and optics using electrooptical nonlinearities in lithium niobate. The nonlinearities are enhanced by using resonant cavities for all the involved modes leading to observation of strong direct coupling between optical and microwave frequencies. With this strong coupling we are not only able to achieve almost 100\% internal conversion efficiency with low added noise, thus presenting a quantum-enabled transducer, but also we are able to observe novel effects such as cooling of a microwave mode using optics. The strong coupling regime also leads to direct observation of dynamical backaction effect between microwave and optical frequencies which are studied in detail here. Finally, we also report first observation of microwave-optics entanglement in form of two-mode squeezed vacuum squeezed 0.7dB below vacuum level. With this new bridge between microwave and optics, the microwave-based quantum technologies can finally be a part of a quantum network which is based on optical photons - putting us one step closer to a future with quantum internet. }, author = {Sahu, Rishabh}, isbn = {978-3-99078-030-5}, issn = {2663 - 337X}, keywords = {quantum optics, electrooptics, quantum networks, quantum communication, transduction}, pages = {190}, publisher = {Institute of Science and Technology Austria}, title = {{Cavity quantum electrooptics}}, doi = {10.15479/at:ista:12900}, year = {2023}, } @article{12984, abstract = {Tattoos are a highly popular medium, with both artistic and medical applications. Although the mechanical process of tattoo application has evolved historically, the results are reliant on the artisanal skill of the artist. This can be especially challenging for some skin tones, or in cases where artists lack experience. We provide the first systematic overview of tattooing as a computational fabrication technique. We built an automated tattooing rig and a recipe for the creation of silicone sheets mimicking realistic skin tones, which allowed us to create an accurate model predicting tattoo appearance. This enables several exciting applications including tattoo previewing, color retargeting, novel ink spectra optimization, color-accurate prosthetics, and more.}, author = {Piovarci, Michael and Chapiro, Alexandre and Bickel, Bernd}, issn = {1557-7368}, journal = {Transactions on Graphics}, keywords = {appearance, modeling, reproduction, tattoo, skin color, gamut mapping, ink-optimization, prosthetic}, location = {Los Angeles, CA, United States}, number = {4}, publisher = {Association for Computing Machinery}, title = {{Skin-Screen: A computational fabrication framework for color tattoos}}, doi = {10.1145/3592432}, volume = {42}, year = {2023}, } @article{13049, abstract = {We propose a computational design approach for covering a surface with individually addressable RGB LEDs, effectively forming a low-resolution surface screen. To achieve a low-cost and scalable approach, we propose creating designs from flat PCB panels bent in-place along the surface of a 3D printed core. Working with standard rigid PCBs enables the use of established PCB manufacturing services, allowing the fabrication of designs with several hundred LEDs. Our approach optimizes the PCB geometry for folding, and then jointly optimizes the LED packing, circuit and routing, solving a challenging layout problem under strict manufacturing requirements. Unlike paper, PCBs cannot bend beyond a certain point without breaking. Therefore, we introduce parametric cut patterns acting as hinges, designed to allow bending while remaining compact. To tackle the joint optimization of placement, circuit and routing, we propose a specialized algorithm that splits the global problem into one sub-problem per triangle, which is then individually solved. Our technique generates PCB blueprints in a completely automated way. After being fabricated by a PCB manufacturing service, the boards are bent and glued by the user onto the 3D printed support. We demonstrate our technique on a range of physical models and virtual examples, creating intricate surface light patterns from hundreds of LEDs.}, author = {Freire, Marco and Bhargava, Manas and Schreck, Camille and Hugron, Pierre-Alexandre and Bickel, Bernd and Lefebvre, Sylvain}, issn = {1557-7368}, journal = {Transactions on Graphics}, keywords = {PCB design and layout, Mesh geometry models}, location = {Los Angeles, CA, United States}, number = {4}, publisher = {Association for Computing Machinery}, title = {{PCBend: Light up your 3D shapes with foldable circuit boards}}, doi = {10.1145/3592411}, volume = {42}, year = {2023}, } @inbook{13052, abstract = {Imaging of the immunological synapse (IS) between dendritic cells (DCs) and T cells in suspension is hampered by suboptimal alignment of cell-cell contacts along the vertical imaging plane. This requires optical sectioning that often results in unsatisfactory resolution in time and space. Here, we present a workflow where DCs and T cells are confined between a layer of glass and polydimethylsiloxane (PDMS) that orients the cells along one, horizontal imaging plane, allowing for fast en-face-imaging of the DC-T cell IS.}, author = {Leithner, Alexander F and Merrin, Jack and Sixt, Michael K}, booktitle = {The Immune Synapse}, editor = {Baldari, Cosima and Dustin, Michael}, isbn = {9781071631348}, issn = {1940-6029}, pages = {137--147}, publisher = {Springer Nature}, title = {{En-Face Imaging of T Cell-Dendritic Cell Immunological Synapses}}, doi = {10.1007/978-1-0716-3135-5_9}, volume = {2654}, year = {2023}, } @article{13117, abstract = {The ability to control the direction of scattered light is crucial to provide flexibility and scalability for a wide range of on-chip applications, such as integrated photonics, quantum information processing, and nonlinear optics. Tunable directionality can be achieved by applying external magnetic fields that modify optical selection rules, by using nonlinear effects, or interactions with vibrations. However, these approaches are less suitable to control microwave photon propagation inside integrated superconducting quantum devices. Here, we demonstrate on-demand tunable directional scattering based on two periodically modulated transmon qubits coupled to a transmission line at a fixed distance. By changing the relative phase between the modulation tones, we realize unidirectional forward or backward photon scattering. Such an in-situ switchable mirror represents a versatile tool for intra- and inter-chip microwave photonic processors. In the future, a lattice of qubits can be used to realize topological circuits that exhibit strong nonreciprocity or chirality.}, author = {Redchenko, Elena and Poshakinskiy, Alexander V. and Sett, Riya and Zemlicka, Martin and Poddubny, Alexander N. and Fink, Johannes M}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Tunable directional photon scattering from a pair of superconducting qubits}}, doi = {10.1038/s41467-023-38761-6}, volume = {14}, year = {2023}, } @misc{13126, abstract = {Mapping the complex and dense arrangement of cells and their connectivity in brain tissue demands nanoscale spatial resolution imaging. Super-resolution optical microscopy excels at visualizing specific molecules and individual cells but fails to provide tissue context. Here, we developed Comprehensive Analysis of Tissues across Scales (CATS), a technology to densely map brain tissue architecture from millimeter regional to nanometer synaptic scales in diverse chemically fixed brain preparations, including rodent and human. CATS uses fixation-compatible extracellular labeling and optical imaging, including stimulated emission depletion or expansion microscopy, to comprehensively delineate cellular structures. It enables three-dimensional reconstruction of single synapses and mapping of synaptic connectivity by identification and analysis of putative synaptic cleft regions. Applying CATS to the mouse hippocampal mossy fiber circuitry, we reconstructed and quantified the synaptic input and output structure of identified neurons. We furthermore demonstrate applicability to clinically derived human tissue samples, including formalin-fixed paraffin-embedded routine diagnostic specimens, for visualizing the cellular architecture of brain tissue in health and disease.}, author = {Danzl, Johann G}, publisher = {Institute of Science and Technology Austria}, title = {{Research data for the publication "Imaging brain tissue architecture across millimeter to nanometer scales"}}, doi = {10.15479/AT:ISTA:13126}, year = {2023}, } @phdthesis{13175, abstract = {About a 100 years ago, we discovered that our universe is inherently noisy, that is, measuring any physical quantity with a precision beyond a certain point is not possible because of an omnipresent inherent noise. We call this - the quantum noise. Certain physical processes allow this quantum noise to get correlated in conjugate physical variables. These quantum correlations can be used to go beyond the potential of our inherently noisy universe and obtain a quantum advantage over the classical applications. Quantum noise being inherent also means that, at the fundamental level, the physical quantities are not well defined and therefore, objects can stay in multiple states at the same time. For example, the position of a particle not being well defined means that the particle is in multiple positions at the same time. About 4 decades ago, we started exploring the possibility of using objects which can be in multiple states at the same time to increase the dimensionality in computation. Thus, the field of quantum computing was born. We discovered that using quantum entanglement, a property closely related to quantum correlations, can be used to speed up computation of certain problems, such as factorisation of large numbers, faster than any known classical algorithm. Thus began the pursuit to make quantum computers a reality. Till date, we have explored quantum control over many physical systems including photons, spins, atoms, ions and even simple circuits made up of superconducting material. However, there persists one ubiquitous theme. The more readily a system interacts with an external field or matter, the more easily we can control it. But this also means that such a system can easily interact with a noisy environment and quickly lose its coherence. Consequently, such systems like electron spins need to be protected from the environment to ensure the longevity of their coherence. Other systems like nuclear spins are naturally protected as they do not interact easily with the environment. But, due to the same reason, it is harder to interact with such systems. After decades of experimentation with various systems, we are convinced that no one type of quantum system would be the best for all the quantum applications. We would need hybrid systems which are all interconnected - much like the current internet where all sorts of devices can all talk to each other - but now for quantum devices. A quantum internet. Optical photons are the best contenders to carry information for the quantum internet. They can carry quantum information cheaply and without much loss - the same reasons which has made them the backbone of our current internet. Following this direction, many systems, like trapped ions, have already demonstrated successful quantum links over a large distances using optical photons. However, some of the most promising contenders for quantum computing which are based on microwave frequencies have been left behind. This is because high energy optical photons can adversely affect fragile low-energy microwave systems. In this thesis, we present substantial progress on this missing quantum link between microwave and optics using electrooptical nonlinearities in lithium niobate. The nonlinearities are enhanced by using resonant cavities for all the involved modes leading to observation of strong direct coupling between optical and microwave frequencies. With this strong coupling we are not only able to achieve almost 100\% internal conversion efficiency with low added noise, thus presenting a quantum-enabled transducer, but also we are able to observe novel effects such as cooling of a microwave mode using optics. The strong coupling regime also leads to direct observation of dynamical backaction effect between microwave and optical frequencies which are studied in detail here. Finally, we also report first observation of microwave-optics entanglement in form of two-mode squeezed vacuum squeezed 0.7dB below vacuum level. With this new bridge between microwave and optics, the microwave-based quantum technologies can finally be a part of a quantum network which is based on optical photons - putting us one step closer to a future with quantum internet. }, author = {Sahu, Rishabh}, isbn = {978-3-99078-030-5}, issn = {2663 - 337X}, keywords = {quantum optics, electrooptics, quantum networks, quantum communication, transduction}, pages = {202}, publisher = {Institute of Science and Technology Austria}, title = {{Cavity quantum electrooptics}}, doi = {10.15479/at:ista:13175}, year = {2023}, } @article{13188, abstract = {The Kirchhoff rod model describes the bending and twisting of slender elastic rods in three dimensions, and has been widely studied to enable the prediction of how a rod will deform, given its geometry and boundary conditions. In this work, we study a number of inverse problems with the goal of computing the geometry of a straight rod that will automatically deform to match a curved target shape after attaching its endpoints to a support structure. Our solution lets us finely control the static equilibrium state of a rod by varying the cross-sectional profiles along its length. We also show that the set of physically realizable equilibrium states admits a concise geometric description in terms of linear line complexes, which leads to very efficient computational design algorithms. Implemented in an interactive software tool, they allow us to convert three-dimensional hand-drawn spline curves to elastic rods, and give feedback about the feasibility and practicality of a design in real time. We demonstrate the efficacy of our method by designing and manufacturing several physical prototypes with applications to interior design and soft robotics.}, author = {Hafner, Christian and Bickel, Bernd}, issn = {1557-7368}, journal = {ACM Transactions on Graphics}, keywords = {Computer Graphics, Computational Design, Computational Geometry, Shape Modeling}, number = {5}, publisher = {Association for Computing Machinery}, title = {{The design space of Kirchhoff rods}}, doi = {10.1145/3606033}, volume = {42}, year = {2023}, } @article{13227, abstract = {Currently available quantum processors are dominated by noise, which severely limits their applicability and motivates the search for new physical qubit encodings. In this work, we introduce the inductively shunted transmon, a weakly flux-tunable superconducting qubit that offers charge offset protection for all levels and a 20-fold reduction in flux dispersion compared to the state-of-the-art resulting in a constant coherence over a full flux quantum. The parabolic confinement provided by the inductive shunt as well as the linearity of the geometric superinductor facilitates a high-power readout that resolves quantum jumps with a fidelity and QND-ness of >90% and without the need for a Josephson parametric amplifier. Moreover, the device reveals quantum tunneling physics between the two prepared fluxon ground states with a measured average decay time of up to 3.5 h. In the future, fast time-domain control of the transition matrix elements could offer a new path forward to also achieve full qubit control in the decay-protected fluxon basis.}, author = {Hassani, Farid and Peruzzo, Matilda and Kapoor, Lucky and Trioni, Andrea and Zemlicka, Martin and Fink, Johannes M}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Inductively shunted transmons exhibit noise insensitive plasmon states and a fluxon decay exceeding 3 hours}}, doi = {10.1038/s41467-023-39656-2}, volume = {14}, year = {2023}, } @article{13264, abstract = {We build a parametric amplifier with a Josephson field-effect transistor (JoFET) as the active element. The resonant frequency of the device is field-effect tunable over a range of 2 GHz. The JoFET amplifier has 20 dB of gain, 4 MHz of instantaneous bandwidth, and a 1-dB compression point of -125.5 dBm when operated at a fixed resonance frequency. }, author = {Phan, Duc T and Falthansl-Scheinecker, Paul and Mishra, Umang and Strickland, W. M. and Langone, D. and Shabani, J. and Higginbotham, Andrew P}, issn = {2331-7019}, journal = {Physical Review Applied}, number = {6}, publisher = {American Physical Society}, title = {{Gate-tunable superconductor-semiconductor parametric amplifier}}, doi = {10.1103/PhysRevApplied.19.064032}, volume = {19}, year = {2023}, }