@article{12960, abstract = {Isomanifolds are the generalization of isosurfaces to arbitrary dimension and codimension, i.e., submanifolds of Rd defined as the zero set of some multivariate multivalued smooth function f:Rd→Rd−n, where n is the intrinsic dimension of the manifold. A natural way to approximate a smooth isomanifold M=f−1(0) is to consider its piecewise linear (PL) approximation M^ based on a triangulation T of the ambient space Rd. In this paper, we describe a simple algorithm to trace isomanifolds from a given starting point. The algorithm works for arbitrary dimensions n and d, and any precision D. Our main result is that, when f (or M) has bounded complexity, the complexity of the algorithm is polynomial in d and δ=1/D (and unavoidably exponential in n). Since it is known that for δ=Ω(d2.5), M^ is O(D2)-close and isotopic to M , our algorithm produces a faithful PL-approximation of isomanifolds of bounded complexity in time polynomial in d. Combining this algorithm with dimensionality reduction techniques, the dependency on d in the size of M^ can be completely removed with high probability. We also show that the algorithm can handle isomanifolds with boundary and, more generally, isostratifolds. The algorithm for isomanifolds with boundary has been implemented and experimental results are reported, showing that it is practical and can handle cases that are far ahead of the state-of-the-art. }, author = {Boissonnat, Jean Daniel and Kachanovich, Siargey and Wintraecken, Mathijs}, issn = {1095-7111}, journal = {SIAM Journal on Computing}, number = {2}, pages = {452--486}, publisher = {Society for Industrial and Applied Mathematics}, title = {{Tracing isomanifolds in Rd in time polynomial in d using Coxeter–Freudenthal–Kuhn triangulations}}, doi = {10.1137/21M1412918}, volume = {52}, year = {2023}, } @article{12961, abstract = {Two notes separated by a doubling in frequency sound similar to humans. This “octave equivalence” is critical to perception and production of music and speech and occurs early in human development. Because it also occurs cross-culturally, a biological basis of octave equivalence has been hypothesized. Members of our team previousy suggested four human traits are at the root of this phenomenon: (1) vocal learning, (2) clear octave information in vocal harmonics, (3) differing vocal ranges, and (4) vocalizing together. Using cross-species studies, we can test how relevant these respective traits are, while controlling for enculturation effects and addressing questions of phylogeny. Common marmosets possess forms of three of the four traits, lacking differing vocal ranges. We tested 11 common marmosets by adapting an established head-turning paradigm, creating a parallel test to an important infant study. Unlike human infants, marmosets responded similarly to tones shifted by an octave or other intervals. Because previous studies with the same head-turning paradigm produced differential results to discernable acoustic stimuli in common marmosets, our results suggest that marmosets do not perceive octave equivalence. Our work suggests differing vocal ranges between adults and children and men and women and the way they are used in singing together may be critical to the development of octave equivalence.}, author = {Wagner, Bernhard and Šlipogor, Vedrana and Oh, Jinook and Varga, Marion and Hoeschele, Marisa}, issn = {1467-7687}, journal = {Developmental Science}, number = {5}, publisher = {Wiley}, title = {{A comparison between common marmosets (Callithrix jacchus) and human infants sheds light on traits proposed to be at the root of human octave equivalence}}, doi = {10.1111/desc.13395}, volume = {26}, year = {2023}, } @phdthesis{12964, abstract = {Pattern formation is of great importance for its contribution across different biological behaviours. During developmental processes for example, patterns of chemical gradients are established to determine cell fate and complex tissue patterns emerge to define structures such as limbs and vascular networks. Patterns are also seen in collectively migrating groups, for instance traveling waves of density emerging in moving animal flocks as well as collectively migrating cells and tissues. To what extent these biological patterns arise spontaneously through the local interaction of individual constituents or are dictated by higher level instructions is still an open question however there is evidence for the involvement of both types of process. Where patterns arise spontaneously there is a long standing interest in how far the interplay of mechanics, e.g. force generation and deformation, and chemistry, e.g. gene regulation and signaling, contributes to the behaviour. This is because many systems are able to both chemically regulate mechanical force production and chemically sense mechanical deformation, forming mechano-chemical feedback loops which can potentially become unstable towards spatio and/or temporal patterning. We work with experimental collaborators to investigate the possibility that this type of interaction drives pattern formation in biological systems at different scales. We focus first on tissue-level ERK-density waves observed during the wound healing response across different systems where many previous studies have proposed that patterns depend on polarized cell migration and arise from a mechanical flocking-like mechanism. By combining theory with mechanical and optogenetic perturbation experiments on in vitro monolayers we instead find evidence for mechanochemical pattern formation involving only scalar bilateral feedbacks between ERK signaling and cell contraction. We perform further modeling and experiment to study how this instability couples with polar cell migration in order to produce a robust and efficient wound healing response. In a following chapter we implement ERK-density coupling and cell migration in a 2D active vertex model to investigate the interaction of ERK-density patterning with different tissue rheologies and find that the spatio-temporal dynamics are able to both locally and globally fluidize a tissue across the solid-fluid glass transition. In a last chapter we move towards lower spatial scales in the context of subcellular patterning of the cell cytoskeleton where we investigate the transition between phases of spatially homogeneous temporal oscillations and chaotic spatio-temporal patterning in the dynamics of myosin and ROCK activities (a motor component of the actomyosin cytoskeleton and its activator). Experimental evidence supports an intrinsic chemical oscillator which we encode in a reaction model and couple to a contractile active gel description of the cell cortex. The model exhibits phases of chemical oscillations and contractile spatial patterning which reproduce many features of the dynamics seen in Drosophila oocyte epithelia in vivo. However, additional pharmacological perturbations to inhibit myosin contractility leaves the role of contractile instability unclear. We discuss alternative hypotheses and investigate the possibility of reaction-diffusion instability.}, author = {Boocock, Daniel R}, isbn = {978-3-99078-032-9}, issn = {2663-337X}, pages = {146}, publisher = {Institute of Science and Technology Austria}, title = {{Mechanochemical pattern formation across biological scales}}, doi = {10.15479/at:ista:12964}, year = {2023}, } @article{12972, abstract = {Embroidery is a long-standing and high-quality approach to making logos and images on textiles. Nowadays, it can also be performed via automated machines that weave threads with high spatial accuracy. A characteristic feature of the appearance of the threads is a high degree of anisotropy. The anisotropic behavior is caused by depositing thin but long strings of thread. As a result, the stitched patterns convey both color and direction. Artists leverage this anisotropic behavior to enhance pure color images with textures, illusions of motion, or depth cues. However, designing colorful embroidery patterns with prescribed directionality is a challenging task, one usually requiring an expert designer. In this work, we propose an interactive algorithm that generates machine-fabricable embroidery patterns from multi-chromatic images equipped with user-specified directionality fields.We cast the problem of finding a stitching pattern into vector theory. To find a suitable stitching pattern, we extract sources and sinks from the divergence field of the vector field extracted from the input and use them to trace streamlines. We further optimize the streamlines to guarantee a smooth and connected stitching pattern. The generated patterns approximate the color distribution constrained by the directionality field. To allow for further artistic control, the trade-off between color match and directionality match can be interactively explored via an intuitive slider. We showcase our approach by fabricating several embroidery paths.}, author = {Liu, Zhenyuan and Piovarci, Michael and Hafner, Christian and Charrondiere, Raphael and Bickel, Bernd}, issn = {1467-8659}, journal = {Computer Graphics Forum}, keywords = {embroidery, design, directionality, density, image}, location = {Saarbrucken, Germany}, number = {2}, pages = {397--409}, publisher = {Wiley}, title = {{Directionality-aware design of embroidery patterns}}, doi = {10.1111/cgf.14770 }, volume = {42}, year = {2023}, } @inproceedings{12976, abstract = {3D printing based on continuous deposition of materials, such as filament-based 3D printing, has seen widespread adoption thanks to its versatility in working with a wide range of materials. An important shortcoming of this type of technology is its limited multi-material capabilities. While there are simple hardware designs that enable multi-material printing in principle, the required software is heavily underdeveloped. A typical hardware design fuses together individual materials fed into a single chamber from multiple inlets before they are deposited. This design, however, introduces a time delay between the intended material mixture and its actual deposition. In this work, inspired by diverse path planning research in robotics, we show that this mechanical challenge can be addressed via improved printer control. We propose to formulate the search for optimal multi-material printing policies in a reinforcement learning setup. We put forward a simple numerical deposition model that takes into account the non-linear material mixing and delayed material deposition. To validate our system we focus on color fabrication, a problem known for its strict requirements for varying material mixtures at a high spatial frequency. We demonstrate that our learned control policy outperforms state-of-the-art hand-crafted algorithms.}, author = {Liao, Kang and Tricard, Thibault and Piovarci, Michael and Seidel, Hans-Peter and Babaei, Vahid}, booktitle = {2023 IEEE International Conference on Robotics and Automation}, issn = {1050-4729}, keywords = {reinforcement learning, deposition, control, color, multi-filament}, location = {London, United Kingdom}, pages = {12345--12352}, publisher = {IEEE}, title = {{Learning deposition policies for fused multi-material 3D printing}}, doi = {10.1109/ICRA48891.2023.10160465}, volume = {2023}, year = {2023}, } @inproceedings{12979, abstract = {Color and gloss are fundamental aspects of surface appearance. State-of-the-art fabrication techniques can manipulate both properties of the printed 3D objects. However, in the context of appearance reproduction, perceptual aspects of color and gloss are usually handled separately, even though previous perceptual studies suggest their interaction. Our work is motivated by previous studies demonstrating a perceived color shift due to a change in the object's gloss, i.e., two samples with the same color but different surface gloss appear as they have different colors. In this paper, we conduct new experiments which support this observation and provide insights into the magnitude and direction of the perceived color change. We use the observations as guidance to design a new method that estimates and corrects the color shift enabling the fabrication of objects with the same perceived color but different surface gloss. We formulate the problem as an optimization procedure solved using differentiable rendering. We evaluate the effectiveness of our method in perceptual experiments with 3D objects fabricated using a multi-material 3D printer and demonstrate potential applications. }, author = {Condor, Jorge and Piovarci, Michael and Bickel, Bernd and Didyk, Piotr}, booktitle = {SIGGRAPH ’23 Conference Proceedings}, isbn = {9798400701597}, keywords = {color, gloss, perception, color compensation, color management}, location = {Los Angeles, CA, United States}, publisher = {Association for Computing Machinery}, title = {{Gloss-aware color correction for 3D printing}}, doi = {10.1145/3588432.3591546}, year = {2023}, } @article{12984, abstract = {Tattoos are a highly popular medium, with both artistic and medical applications. Although the mechanical process of tattoo application has evolved historically, the results are reliant on the artisanal skill of the artist. This can be especially challenging for some skin tones, or in cases where artists lack experience. We provide the first systematic overview of tattooing as a computational fabrication technique. We built an automated tattooing rig and a recipe for the creation of silicone sheets mimicking realistic skin tones, which allowed us to create an accurate model predicting tattoo appearance. This enables several exciting applications including tattoo previewing, color retargeting, novel ink spectra optimization, color-accurate prosthetics, and more.}, author = {Piovarci, Michael and Chapiro, Alexandre and Bickel, Bernd}, issn = {1557-7368}, journal = {Transactions on Graphics}, keywords = {appearance, modeling, reproduction, tattoo, skin color, gamut mapping, ink-optimization, prosthetic}, location = {Los Angeles, CA, United States}, number = {4}, publisher = {Association for Computing Machinery}, title = {{Skin-Screen: A computational fabrication framework for color tattoos}}, doi = {10.1145/3592432}, volume = {42}, year = {2023}, } @article{13033, abstract = {Current methods for assessing cell proliferation in 3D scaffolds rely on changes in metabolic activity or total DNA, however, direct quantification of cell number in 3D scaffolds remains a challenge. To address this issue, we developed an unbiased stereology approach that uses systematic-random sampling and thin focal-plane optical sectioning of the scaffolds followed by estimation of total cell number (StereoCount). This approach was validated against an indirect method for measuring the total DNA (DNA content); and the Bürker counting chamber, the current reference method for quantifying cell number. We assessed the total cell number for cell seeding density (cells per unit volume) across four values and compared the methods in terms of accuracy, ease-of-use and time demands. The accuracy of StereoCount markedly outperformed the DNA content for cases with ~ 10,000 and ~ 125,000 cells/scaffold. For cases with ~ 250,000 and ~ 375,000 cells/scaffold both StereoCount and DNA content showed lower accuracy than the Bürker but did not differ from each other. In terms of ease-of-use, there was a strong advantage for the StereoCount due to output in terms of absolute cell numbers along with the possibility for an overview of cell distribution and future use of automation for high throughput analysis. Taking together, the StereoCount method is an efficient approach for direct cell quantification in 3D collagen scaffolds. Its major benefit is that automated StereoCount could accelerate research using 3D scaffolds focused on drug discovery for a wide variety of human diseases.}, author = {Zavadakova, Anna and Vistejnova, Lucie and Belinova, Tereza and Tichanek, Filip and Bilikova, Dagmar and Mouton, Peter R.}, issn = {2045-2322}, journal = {Scientific Reports}, keywords = {Multidisciplinary}, number = {1}, publisher = {Springer Nature}, title = {{Novel stereological method for estimation of cell counts in 3D collagen scaffolds}}, doi = {10.1038/s41598-023-35162-z}, volume = {13}, year = {2023}, } @article{13039, abstract = {We calculate reflectivities of dynamically compressed water, water-ethanol mixtures, and ammonia at infrared and optical wavelengths with density functional theory and molecular dynamics simulations. The influence of the exchange-correlation functional on the results is examined in detail. Our findings indicate that the consistent use of the HSE hybrid functional reproduces experimental results much better than the commonly used PBE functional. The HSE functional offers not only a more accurate description of the electronic band gap but also shifts the onset of molecular dissociation in the molecular dynamics simulations to significantly higher pressures. We also highlight the importance of using accurate reference standards in reflectivity experiments and reanalyze infrared and optical reflectivity data from recent experiments. Thus, our combined theoretical and experimental work explains and resolves lingering discrepancies between calculations and measurements for the investigated molecular substances under shock compression.}, author = {French, Martin and Bethkenhagen, Mandy and Ravasio, Alessandra and Hernandez, Jean Alexis}, issn = {2469-9969}, journal = {Physical Review B}, number = {13}, publisher = {American Physical Society}, title = {{Ab initio calculation of the reflectivity of molecular fluids under shock compression}}, doi = {10.1103/PhysRevB.107.134109}, volume = {107}, year = {2023}, } @article{13041, abstract = {A series of triarylamines was synthesised and screened for their suitability as catholytes in redox flow batteries using cyclic voltammetry (CV). Tris(4-aminophenyl)amine was found to be the strongest candidate. Solubility and initial electrochemical performance were promising; however, polymerisation was observed during electrochemical cycling leading to rapid capacity fade prescribed to a loss of accessible active material and the limitation of ion transport processes within the cell. A mixed electrolyte system of H3PO4 and HCl was found to inhibit polymerisation producing oligomers that consumed less active material reducing rates of degradation in the redox flow battery. Under these conditions Coulombic efficiency improved by over 4 %, the maximum number of cycles more than quadrupled and an additional theoretical capacity of 20 % was accessed. This paper is, to our knowledge, the first example of triarylamines as catholytes in all-aqueous redox flow batteries and emphasises the impact supporting electrolytes can have on electrochemical performance.}, author = {Farag, Nadia L. and Jethwa, Rajesh B and Beardmore, Alice E. and Insinna, Teresa and O'Keefe, Christopher A. and Klusener, Peter A.A. and Grey, Clare P. and Wright, Dominic S.}, issn = {1864-564X}, journal = {ChemSusChem}, number = {13}, publisher = {Wiley}, title = {{Triarylamines as catholytes in aqueous organic redox flow batteries}}, doi = {10.1002/cssc.202300128}, volume = {16}, year = {2023}, } @article{13042, abstract = {Let Lc,n denote the size of the longest cycle in G(n, c/n),c >1 constant. We show that there exists a continuous function f(c) such that Lc,n/n→f(c) a.s. for c>20, thus extending a result of Frieze and the author to smaller values of c. Thereafter, for c>20, we determine the limit of the probability that G(n, c/n)contains cycles of every length between the length of its shortest and its longest cycles as n→∞.}, author = {Anastos, Michael}, issn = {1077-8926}, journal = {Electronic Journal of Combinatorics}, number = {2}, publisher = {Electronic Journal of Combinatorics}, title = {{A note on long cycles in sparse random graphs}}, doi = {10.37236/11471}, volume = {30}, year = {2023}, } @article{13043, abstract = {We derive a weak-strong uniqueness principle for BV solutions to multiphase mean curvature flow of triple line clusters in three dimensions. Our proof is based on the explicit construction of a gradient flow calibration in the sense of the recent work of Fischer et al. (2020) for any such cluster. This extends the two-dimensional construction to the three-dimensional case of surfaces meeting along triple junctions.}, author = {Hensel, Sebastian and Laux, Tim}, issn = {1463-9971}, journal = {Interfaces and Free Boundaries}, number = {1}, pages = {37--107}, publisher = {EMS Press}, title = {{Weak-strong uniqueness for the mean curvature flow of double bubbles}}, doi = {10.4171/IFB/484}, volume = {25}, year = {2023}, } @article{13044, abstract = {Singlet oxygen (1O2) formation is now recognised as a key aspect of non-aqueous oxygen redox chemistry. For identifying 1O2, chemical trapping via 9,10-dimethylanthracene (DMA) to form the endoperoxide (DMA-O2) has become the mainstay method due to its sensitivity, selectivity, and ease of use. While DMA has been shown to be selective for 1O2, rather than forming DMA-O2 with a wide variety of potentially reactive O-containing species, false positives might hypothetically be obtained in the presence of previously overlooked species. Here, we first give unequivocal direct spectroscopic proof by the 1O2-specific near infrared (NIR) emission at 1270 nm for the previously proposed 1O2 formation pathways, which centre around superoxide disproportionation. We then show that peroxocarbonates, common intermediates in metal-O2 and metal carbonate electrochemistry, do not produce false-positive DMA-O2. Moreover, we identify a previously unreported 1O2-forming pathway through the reaction of CO2 with superoxide. Overall, we give unequivocal proof for 1O2 formation in non-aqueous oxygen redox and show that chemical trapping with DMA is a reliable method to assess 1O2 formation.}, author = {Mondal, Soumyadip and Jethwa, Rajesh B and Pant, Bhargavi and Hauschild, Robert and Freunberger, Stefan Alexander}, issn = {1364-5498}, journal = {Faraday Discussions}, keywords = {Physical and Theoretical Chemistry}, publisher = {Royal Society of Chemistry}, title = {{Singlet oxygen in non-aqueous oxygen redox: Direct spectroscopic evidence for formation pathways and reliability of chemical probes}}, doi = {10.1039/d3fd00088e}, year = {2023}, } @inproceedings{13048, abstract = {In this paper we introduce a pruning of the medial axis called the (λ,α)-medial axis (axλα). We prove that the (λ,α)-medial axis of a set K is stable in a Gromov-Hausdorff sense under weak assumptions. More formally we prove that if K and K′ are close in the Hausdorff (dH) sense then the (λ,α)-medial axes of K and K′ are close as metric spaces, that is the Gromov-Hausdorff distance (dGH) between the two is 1/4-Hölder in the sense that dGH (axλα(K),axλα(K′)) ≲ dH(K,K′)1/4. The Hausdorff distance between the two medial axes is also bounded, by dH (axλα(K),λα(K′)) ≲ dH(K,K′)1/2. These quantified stability results provide guarantees for practical computations of medial axes from approximations. Moreover, they provide key ingredients for studying the computability of the medial axis in the context of computable analysis.}, author = {Lieutier, André and Wintraecken, Mathijs}, booktitle = {Proceedings of the 55th Annual ACM Symposium on Theory of Computing}, isbn = {9781450399135}, location = {Orlando, FL, United States}, pages = {1768--1776}, publisher = {Association for Computing Machinery}, title = {{Hausdorff and Gromov-Hausdorff stable subsets of the medial axis}}, doi = {10.1145/3564246.3585113}, year = {2023}, } @article{13049, abstract = {We propose a computational design approach for covering a surface with individually addressable RGB LEDs, effectively forming a low-resolution surface screen. To achieve a low-cost and scalable approach, we propose creating designs from flat PCB panels bent in-place along the surface of a 3D printed core. Working with standard rigid PCBs enables the use of established PCB manufacturing services, allowing the fabrication of designs with several hundred LEDs. Our approach optimizes the PCB geometry for folding, and then jointly optimizes the LED packing, circuit and routing, solving a challenging layout problem under strict manufacturing requirements. Unlike paper, PCBs cannot bend beyond a certain point without breaking. Therefore, we introduce parametric cut patterns acting as hinges, designed to allow bending while remaining compact. To tackle the joint optimization of placement, circuit and routing, we propose a specialized algorithm that splits the global problem into one sub-problem per triangle, which is then individually solved. Our technique generates PCB blueprints in a completely automated way. After being fabricated by a PCB manufacturing service, the boards are bent and glued by the user onto the 3D printed support. We demonstrate our technique on a range of physical models and virtual examples, creating intricate surface light patterns from hundreds of LEDs.}, author = {Freire, Marco and Bhargava, Manas and Schreck, Camille and Hugron, Pierre-Alexandre and Bickel, Bernd and Lefebvre, Sylvain}, issn = {1557-7368}, journal = {Transactions on Graphics}, keywords = {PCB design and layout, Mesh geometry models}, location = {Los Angeles, CA, United States}, number = {4}, publisher = {Association for Computing Machinery}, title = {{PCBend: Light up your 3D shapes with foldable circuit boards}}, doi = {10.1145/3592411}, volume = {42}, year = {2023}, } @inbook{13052, abstract = {Imaging of the immunological synapse (IS) between dendritic cells (DCs) and T cells in suspension is hampered by suboptimal alignment of cell-cell contacts along the vertical imaging plane. This requires optical sectioning that often results in unsatisfactory resolution in time and space. Here, we present a workflow where DCs and T cells are confined between a layer of glass and polydimethylsiloxane (PDMS) that orients the cells along one, horizontal imaging plane, allowing for fast en-face-imaging of the DC-T cell IS.}, author = {Leithner, Alexander F and Merrin, Jack and Sixt, Michael K}, booktitle = {The Immune Synapse}, editor = {Baldari, Cosima and Dustin, Michael}, isbn = {9781071631348}, issn = {1940-6029}, pages = {137--147}, publisher = {Springer Nature}, title = {{En-Face Imaging of T Cell-Dendritic Cell Immunological Synapses}}, doi = {10.1007/978-1-0716-3135-5_9}, volume = {2654}, year = {2023}, } @article{14653, abstract = {Mass spectrometry imaging (MSI) is a powerful analytical technique for the two-dimensional (2D) localization of chemicals on surfaces. Conventional MSI experiments require to predefine the surface of interest based on photographic or microscopic images. Typically, these boundaries can no longer be changed or adjusted once the experiment has been started. In terms of a more interactive approach we recently developed a pen-like ionization interface which is directly connected to the mass spectrometer. The device allows the user to ionize chemicals by desorption electrospray ionization (DESI) and to freely move the interface over a surface of interest. A mini camera, which is mounted on the tip of the pen, magnifies the desorption area and enables a simple positioning of the pen. The combination of optical data from the camera module and chemical data obtained by mass analysis facilitates a novel type of imaging experiment: interactive mass spectrometry imaging (IMSI). For this application, we present a novel approach for a robust, optical flow-based motion detection. While the live video stream from the camera is used to track the pen's motion across the surface a post-acquisition algorithm correlates the coordinates of the pen trajectory with respective mass spectra obtained from a simultaneous mass spectrometric data acquisition. This algorithm is no longer dependent on a single, manually applied optical marker on the sample surface, which has to be visible on all video frames throughout the analysis. The advanced DESI-IMSI method was successfully tested on inkjet-printed letters as well as mouse brain tissue samples. Validation of the results was done by comparing DESI-IMSI with standard DESI-MSI data.}, author = {Kluibenschedl, Florian and Ploner, Anna and Meisenbichler, Christina and Konrat, Robert and Müller, Thomas}, issn = {1387-3806}, journal = {International Journal of Mass Spectrometry}, publisher = {Elsevier}, title = {{Advanced motion tracking for interactive mass spectrometry imaging (IMSI)}}, doi = {10.1016/j.ijms.2023.117168}, volume = {495}, year = {2023}, } @article{10656, abstract = {Idealized simulations of the tropical atmosphere have predicted that clouds can spontaneously clump together in space, despite perfectly homogeneous settings. This phenomenon has been called self-aggregation, and it results in a state where a moist cloudy region with intense deep convective storms is surrounded by extremely dry subsiding air devoid of deep clouds. We review here the main findings from theoretical work and idealized models of this phenomenon, highlighting the physical processes believed to play a key role in convective self-aggregation. We also review the growing literature on the importance and implications of this phenomenon for the tropical atmosphere, notably, for the hydrological cycle and for precipitation extremes, in our current and in a warming climate.}, author = {Muller, Caroline J and Yang, Da and Craig, George and Cronin, Timothy and Fildier, Benjamin and Haerter, Jan O. and Hohenegger, Cathy and Mapes, Brian and Randall, David and Shamekh, Sara and Sherwood, Steven C.}, issn = {1545-4479}, journal = {Annual Review of Fluid Mechanics}, pages = {133--157}, publisher = {Annual Reviews}, title = {{Spontaneous aggregation of convective storms}}, doi = {10.1146/annurev-fluid-022421-011319}, volume = {54}, year = {2022}, } @article{10658, abstract = {We analyse how migration from a large mainland influences genetic load and population numbers on an island, in a scenario where fitness-affecting variants are unconditionally deleterious, and where numbers decline with increasing load. Our analysis shows that migration can have qualitatively different effects, depending on the total mutation target and fitness effects of deleterious variants. In particular, we find that populations exhibit a genetic Allee effect across a wide range of parameter combinations, when variants are partially recessive, cycling between low-load (large-population) and high-load (sink) states. Increased migration reduces load in the sink state (by increasing heterozygosity) but further inflates load in the large-population state (by hindering purging). We identify various critical parameter thresholds at which one or other stable state collapses, and discuss how these thresholds are influenced by the genetic versus demographic effects of migration. Our analysis is based on a ‘semi-deterministic’ analysis, which accounts for genetic drift but neglects demographic stochasticity. We also compare against simulations which account for both demographic stochasticity and drift. Our results clarify the importance of gene flow as a key determinant of extinction risk in peripheral populations, even in the absence of ecological gradients. This article is part of the theme issue ‘Species’ ranges in the face of changing environments (part I)’.}, author = {Sachdeva, Himani and Olusanya, Oluwafunmilola O and Barton, Nicholas H}, issn = {1471-2970}, journal = {Philosophical Transactions of the Royal Society B}, number = {1846}, publisher = {The Royal Society}, title = {{Genetic load and extinction in peripheral populations: The roles of migration, drift and demographic stochasticity}}, doi = {10.1098/rstb.2021.0010}, volume = {377}, year = {2022}, } @article{10702, abstract = {Background: Blood-based markers of cognitive functioning might provide an accessible way to track neurodegeneration years prior to clinical manifestation of cognitive impairment and dementia. Results: Using blood-based epigenome-wide analyses of general cognitive function, we show that individual differences in DNA methylation (DNAm) explain 35.0% of the variance in general cognitive function (g). A DNAm predictor explains ~4% of the variance, independently of a polygenic score, in two external cohorts. It also associates with circulating levels of neurology- and inflammation-related proteins, global brain imaging metrics, and regional cortical volumes. Conclusions: As sample sizes increase, the ability to assess cognitive function from DNAm data may be informative in settings where cognitive testing is unreliable or unavailable.}, author = {McCartney, Daniel L. and Hillary, Robert F. and Conole, Eleanor L.S. and Banos, Daniel Trejo and Gadd, Danni A. and Walker, Rosie M. and Nangle, Cliff and Flaig, Robin and Campbell, Archie and Murray, Alison D. and Maniega, Susana Muñoz and Valdés-Hernández, María Del C. and Harris, Mathew A. and Bastin, Mark E. and Wardlaw, Joanna M. and Harris, Sarah E. and Porteous, David J. and Tucker-Drob, Elliot M. and McIntosh, Andrew M. and Evans, Kathryn L. and Deary, Ian J. and Cox, Simon R. and Robinson, Matthew Richard and Marioni, Riccardo E.}, issn = {1474-760X}, journal = {Genome Biology}, number = {1}, publisher = {Springer Nature}, title = {{Blood-based epigenome-wide analyses of cognitive abilities}}, doi = {10.1186/s13059-021-02596-5}, volume = {23}, year = {2022}, }