@article{12198, abstract = {The Arabidopsis thaliana central cell, the companion cell of the egg, undergoes DNA demethylation before fertilization, but the targeting preferences, mechanism, and biological significance of this process remain unclear. Here, we show that active DNA demethylation mediated by the DEMETER DNA glycosylase accounts for all of the demethylation in the central cell and preferentially targets small, AT-rich, and nucleosome-depleted euchromatic transposable elements. The vegetative cell, the companion cell of sperm, also undergoes DEMETER-dependent demethylation of similar sequences, and lack of DEMETER in vegetative cells causes reduced small RNA–directed DNA methylation of transposons in sperm. Our results demonstrate that demethylation in companion cells reinforces transposon methylation in plant gametes and likely contributes to stable silencing of transposable elements across generations.}, author = {Ibarra, Christian A. and Feng, Xiaoqi and Schoft, Vera K. and Hsieh, Tzung-Fu and Uzawa, Rie and Rodrigues, Jessica A. and Zemach, Assaf and Chumak, Nina and Machlicova, Adriana and Nishimura, Toshiro and Rojas, Denisse and Fischer, Robert L. and Tamaru, Hisashi and Zilberman, Daniel}, issn = {1095-9203}, journal = {Science}, keywords = {Multidisciplinary}, number = {6100}, pages = {1360--1364}, publisher = {American Association for the Advancement of Science}, title = {{Active DNA demethylation in plant companion cells reinforces transposon methylation in gametes}}, doi = {10.1126/science.1224839}, volume = {337}, year = {2012}, } @misc{9755, abstract = {Due to the omnipresent risk of epidemics, insect societies have evolved sophisticated disease defences at the individual and colony level. An intriguing yet little understood phenomenon is that social contact to pathogen-exposed individuals reduces susceptibility of previously naive nestmates to this pathogen. We tested whether such social immunisation in Lasius ants against the entomopathogenic fungus Metarhizium anisopliae is based on active upregulation of the immune system of nestmates following contact to an infectious individual or passive protection via transfer of immune effectors among group members—that is, active versus passive immunisation. We found no evidence for involvement of passive immunisation via transfer of antimicrobials among colony members. Instead, intensive allogrooming behaviour between naive and pathogen-exposed ants before fungal conidia firmly attached to their cuticle suggested passage of the pathogen from the exposed individuals to their nestmates. By tracing fluorescence-labelled conidia we indeed detected frequent pathogen transfer to the nestmates, where they caused low-level infections as revealed by growth of small numbers of fungal colony forming units from their dissected body content. These infections rarely led to death, but instead promoted an enhanced ability to inhibit fungal growth and an active upregulation of immune genes involved in antifungal defences (defensin and prophenoloxidase, PPO). Contrarily, there was no upregulation of the gene cathepsin L, which is associated with antibacterial and antiviral defences, and we found no increased antibacterial activity of nestmates of fungus-exposed ants. This indicates that social immunisation after fungal exposure is specific, similar to recent findings for individual-level immune priming in invertebrates. Epidemiological modeling further suggests that active social immunisation is adaptive, as it leads to faster elimination of the disease and lower death rates than passive immunisation. Interestingly, humans have also utilised the protective effect of low-level infections to fight smallpox by intentional transfer of low pathogen doses (“variolation” or “inoculation”).}, author = {Konrad, Matthias and Vyleta, Meghan and Theis, Fabian and Stock, Miriam and Klatt, Martina and Drescher, Verena and Marr, Carsten and Ugelvig, Line V and Cremer, Sylvia}, publisher = {Dryad}, title = {{Data from: Social transfer of pathogenic fungus promotes active immunisation in ant colonies}}, doi = {10.5061/dryad.sv37s}, year = {2012}, } @misc{9757, abstract = {To fight infectious diseases, host immune defences are employed at multiple levels. Sanitary behaviour, such as pathogen avoidance and removal, acts as a first line of defence to prevent infection [1] before activation of the physiological immune system. Insect societies have evolved a wide range of collective hygiene measures and intensive health care towards pathogen-exposed group members [2]. One of the most common behaviours is allogrooming, in which nestmates remove infectious particles from the body surfaces of exposed individuals [3]. Here we show that, in invasive garden ants, grooming of fungus-exposed brood is effective beyond the sheer mechanical removal of fungal conidiospores as it also includes chemical disinfection through the application of poison produced by the ants themselves. Formic acid is the main active component of the poison. It inhibits fungal growth of conidiospores remaining on the brood surface after grooming and also those collected in the mouth of the grooming ant. This dual function is achieved by uptake of the poison droplet into the mouth through acidopore self-grooming and subsequent application onto the infectious brood via brood grooming. This extraordinary behaviour extends current understanding of grooming and the establishment of social immunity in insect societies.}, author = {Tragust, Simon and Mitteregger, Barbara and Barone, Vanessa and Konrad, Matthias and Ugelvig, Line V and Cremer, Sylvia}, publisher = {Dryad}, title = {{Data from: Ants disinfect fungus-exposed brood by oral uptake and spread of their poison}}, doi = {10.5061/dryad.61649}, year = {2012}, } @misc{9758, abstract = {We propose a two-step procedure for estimating multiple migration rates in an approximate Bayesian computation (ABC) framework, accounting for global nuisance parameters. The approach is not limited to migration, but generally of interest for inference problems with multiple parameters and a modular structure (e.g. independent sets of demes or loci). We condition on a known, but complex demographic model of a spatially subdivided population, motivated by the reintroduction of Alpine ibex (Capra ibex) into Switzerland. In the first step, the global parameters ancestral mutation rate and male mating skew have been estimated for the whole population in Aeschbacher et al. (Genetics 2012; 192: 1027). In the second step, we estimate in this study the migration rates independently for clusters of demes putatively connected by migration. For large clusters (many migration rates), ABC faces the problem of too many summary statistics. We therefore assess by simulation if estimation per pair of demes is a valid alternative. We find that the trade-off between reduced dimensionality for the pairwise estimation on the one hand and lower accuracy due to the assumption of pairwise independence on the other depends on the number of migration rates to be inferred: the accuracy of the pairwise approach increases with the number of parameters, relative to the joint estimation approach. To distinguish between low and zero migration, we perform ABC-type model comparison between a model with migration and one without. Applying the approach to microsatellite data from Alpine ibex, we find no evidence for substantial gene flow via migration, except for one pair of demes in one direction.}, author = {Aeschbacher, Simon and Futschik, Andreas and Beaumont, Mark}, publisher = {Dryad}, title = {{Data from: Approximate Bayesian computation for modular inference problems with many parameters: the example of migration rates}}, doi = {10.5061/dryad.274b1}, year = {2012}, } @article{3836, abstract = {Hierarchical Timing Language (HTL) is a coordination language for distributed, hard real-time applications. HTL is a hierarchical extension of Giotto and, like its predecessor, based on the logical execution time (LET) paradigm of real-time programming. Giotto is compiled into code for a virtual machine, called the EmbeddedMachine (or E machine). If HTL is targeted to the E machine, then the hierarchicalprogram structure needs to be flattened; the flattening makes separatecompilation difficult, and may result in E machinecode of exponential size. In this paper, we propose a generalization of the E machine, which supports a hierarchicalprogram structure at runtime through real-time trigger mechanisms that are arranged in a tree. We present the generalized E machine, and a modular compiler for HTL that generates code of linear size. The compiler may generate code for any part of a given HTL program separately in any order.}, author = {Ghosal, Arkadeb and Iercan, Daniel and Kirsch, Christoph and Henzinger, Thomas A and Sangiovanni Vincentelli, Alberto}, journal = {Science of Computer Programming}, number = {2}, pages = {96 -- 112}, publisher = {Elsevier}, title = {{Separate compilation of hierarchical real-time programs into linear-bounded embedded machine code}}, doi = {10.1016/j.scico.2010.06.004}, volume = {77}, year = {2012}, } @article{3846, abstract = {We summarize classical and recent results about two-player games played on graphs with ω-regular objectives. These games have applications in the verification and synthesis of reactive systems. Important distinctions are whether a graph game is turn-based or concurrent; deterministic or stochastic; zero-sum or not. We cluster known results and open problems according to these classifications.}, author = {Chatterjee, Krishnendu and Henzinger, Thomas A}, journal = {Journal of Computer and System Sciences}, number = {2}, pages = {394 -- 413}, publisher = {Elsevier}, title = {{A survey of stochastic ω regular games}}, doi = {10.1016/j.jcss.2011.05.002}, volume = {78}, year = {2012}, } @inproceedings{3163, abstract = {We study multi-label prediction for structured output sets, a problem that occurs, for example, in object detection in images, secondary structure prediction in computational biology, and graph matching with symmetries. Conventional multilabel classification techniques are typically not applicable in this situation, because they require explicit enumeration of the label set, which is infeasible in case of structured outputs. Relying on techniques originally designed for single-label structured prediction, in particular structured support vector machines, results in reduced prediction accuracy, or leads to infeasible optimization problems. In this work we derive a maximum-margin training formulation for multi-label structured prediction that remains computationally tractable while achieving high prediction accuracy. It also shares most beneficial properties with single-label maximum-margin approaches, in particular formulation as a convex optimization problem, efficient working set training, and PAC-Bayesian generalization bounds.}, author = {Lampert, Christoph}, location = {Granada, Spain}, publisher = {Neural Information Processing Systems}, title = {{Maximum margin multi-label structured prediction}}, year = {2011}, } @inproceedings{3264, abstract = {Verification of programs with procedures, multi-threaded programs, and higher-order functional programs can be effectively au- tomated using abstraction and refinement schemes that rely on spurious counterexamples for abstraction discovery. The analysis of counterexam- ples can be automated by a series of interpolation queries, or, alterna- tively, as a constraint solving query expressed by a set of recursion free Horn clauses. (A set of interpolation queries can be formulated as a single constraint over Horn clauses with linear dependency structure between the unknown relations.) In this paper we present an algorithm for solving recursion free Horn clauses over a combined theory of linear real/rational arithmetic and uninterpreted functions. Our algorithm performs resolu- tion to deal with the clausal structure and relies on partial solutions to deal with (non-local) instances of functionality axioms.}, author = {Gupta, Ashutosh and Popeea, Corneliu and Rybalchenko, Andrey}, editor = {Yang, Hongseok}, location = {Kenting, Taiwan}, pages = {188 -- 203}, publisher = {Springer}, title = {{Solving recursion-free Horn clauses over LI+UIF}}, doi = {10.1007/978-3-642-25318-8_16}, volume = {7078}, year = {2011}, } @inproceedings{3266, abstract = {We present a joint image segmentation and labeling model (JSL) which, given a bag of figure-ground segment hypotheses extracted at multiple image locations and scales, constructs a joint probability distribution over both the compatible image interpretations (tilings or image segmentations) composed from those segments, and over their labeling into categories. The process of drawing samples from the joint distribution can be interpreted as first sampling tilings, modeled as maximal cliques, from a graph connecting spatially non-overlapping segments in the bag [1], followed by sampling labels for those segments, conditioned on the choice of a particular tiling. We learn the segmentation and labeling parameters jointly, based on Maximum Likelihood with a novel Incremental Saddle Point estimation procedure. The partition function over tilings and labelings is increasingly more accurately approximated by including incorrect configurations that a not-yet-competent model rates probable during learning. We show that the proposed methodologymatches the current state of the art in the Stanford dataset [2], as well as in VOC2010, where 41.7% accuracy on the test set is achieved.}, author = {Ion, Adrian and Carreira, Joao and Sminchisescu, Cristian}, booktitle = {NIPS Proceedings}, location = {Granada, Spain}, pages = {1827 -- 1835}, publisher = {Neural Information Processing Systems Foundation}, title = {{Probabilistic joint image segmentation and labeling}}, volume = {24}, year = {2011}, } @article{3267, abstract = {We address the problem of localizing homology classes, namely, finding the cycle representing a given class with the most concise geometric measure. We study the problem with different measures: volume, diameter and radius. For volume, that is, the 1-norm of a cycle, two main results are presented. First, we prove that the problem is NP-hard to approximate within any constant factor. Second, we prove that for homology of dimension two or higher, the problem is NP-hard to approximate even when the Betti number is O(1). The latter result leads to the inapproximability of the problem of computing the nonbounding cycle with the smallest volume and computing cycles representing a homology basis with the minimal total volume. As for the other two measures defined by pairwise geodesic distance, diameter and radius, we show that the localization problem is NP-hard for diameter but is polynomial for radius. Our work is restricted to homology over the ℤ2 field.}, author = {Chen, Chao and Freedman, Daniel}, journal = {Discrete & Computational Geometry}, number = {3}, pages = {425 -- 448}, publisher = {Springer}, title = {{Hardness results for homology localization}}, doi = {10.1007/s00454-010-9322-8}, volume = {45}, year = {2011}, } @article{3269, abstract = {The unintentional scattering of light between neighboring surfaces in complex projection environments increases the brightness and decreases the contrast, disrupting the appearance of the desired imagery. To achieve satisfactory projection results, the inverse problem of global illumination must be solved to cancel this secondary scattering. In this paper, we propose a global illumination cancellation method that minimizes the perceptual difference between the desired imagery and the actual total illumination in the resulting physical environment. Using Gauss-Newton and active set methods, we design a fast solver for the bound constrained nonlinear least squares problem raised by the perceptual error metrics. Our solver is further accelerated with a CUDA implementation and multi-resolution method to achieve 1–2 fps for problems with approximately 3000 variables. We demonstrate the global illumination cancellation algorithm with our multi-projector system. Results show that our method preserves the color fidelity of the desired imagery significantly better than previous methods.}, author = {Sheng, Yu and Cutler, Barbara and Chen, Chao and Nasman, Joshua}, journal = {Computer Graphics Forum}, number = {4}, pages = {1261 -- 1268}, publisher = {Wiley-Blackwell}, title = {{Perceptual global illumination cancellation in complex projection environments}}, doi = {10.1111/j.1467-8659.2011.01985.x}, volume = {30}, year = {2011}, } @inproceedings{3270, abstract = {The persistence diagram of a filtered simplicial com- plex is usually computed by reducing the boundary matrix of the complex. We introduce a simple op- timization technique: by processing the simplices of the complex in decreasing dimension, we can “kill” columns (i.e., set them to zero) without reducing them. This technique completely avoids reduction on roughly half of the columns. We demonstrate that this idea significantly improves the running time of the reduction algorithm in practice. We also give an output-sensitive complexity analysis for the new al- gorithm which yields to sub-cubic asymptotic bounds under certain assumptions.}, author = {Chen, Chao and Kerber, Michael}, location = {Morschach, Switzerland}, pages = {197 -- 200}, publisher = {TU Dortmund}, title = {{Persistent homology computation with a twist}}, year = {2011}, } @inbook{3271, abstract = {In this paper we present an efficient framework for computation of persis- tent homology of cubical data in arbitrary dimensions. An existing algorithm using simplicial complexes is adapted to the setting of cubical complexes. The proposed approach enables efficient application of persistent homology in domains where the data is naturally given in a cubical form. By avoiding triangulation of the data, we significantly reduce the size of the complex. We also present a data-structure de- signed to compactly store and quickly manipulate cubical complexes. By means of numerical experiments, we show high speed and memory efficiency of our ap- proach. We compare our framework to other available implementations, showing its superiority. Finally, we report performance on selected 3D and 4D data-sets.}, author = {Wagner, Hubert and Chen, Chao and Vuçini, Erald}, booktitle = {Topological Methods in Data Analysis and Visualization II}, editor = {Peikert, Ronald and Hauser, Helwig and Carr, Hamish and Fuchs, Raphael}, pages = {91 -- 106}, publisher = {Springer}, title = {{Efficient computation of persistent homology for cubical data}}, doi = {10.1007/978-3-642-23175-9_7}, year = {2011}, } @phdthesis{3273, author = {Maître, Jean-Léon}, issn = {2663-337X}, publisher = {Institute of Science and Technology Austria}, title = {{Mechanics of adhesion and de‐adhesion in zebrafish germ layer progenitors}}, year = {2011}, } @phdthesis{3275, abstract = {Chemokines organize immune cell trafficking by inducing either directed (tactic) or random (kinetic) migration and by activating integrins in order to support surface adhesion (haptic). Beyond that the same chemokines can establish clearly defined functional areas in secondary lymphoid organs. Until now it is unclear how chemokines can fulfill such diverse functions. One decisive prerequisite to explain these capacities is to know how chemokines are presented in tissue. In theory chemokines could occur either soluble or immobilized, and could be distributed either homogenously or as a concentration gradient. To dissect if and how the presenting mode of chemokines influences immune cells, I tested the response of dendritic cells (DCs) to differentially displayed chemokines. DCs are antigen presenting cells that reside in the periphery and migrate into draining lymph nodes (LNs) once exposed to inflammatory stimuli to activate naïve T cells. DCs are guided to and within the LN by the chemokine receptor CCR7, which has two ligands, the chemokines CCL19 and CCL21. Both CCR7 ligands are expressed by fibroblastic reticular cells in the LN, but differ in their ability to bind to heparan sulfate residues. CCL21 has a highly charged C-terminal extension, which mediates binding to anionic surfaces, whereas CCL19 is lacking such residues and likely distributes as a soluble molecule. This study shows that surface-bound CCL21 causes random, haptokinetic DC motility, which is confined to the chemokine coated area by insideout activation of β2 integrins that mediate cell binding to the surface. CCL19 on the other hand forms concentration gradients which trigger directional, chemotactic movement, but no surface adhesion. In addition DCs can actively manipulate this system by recruiting and activating serine proteases on their surfaces, which create - by proteolytically removing the adhesive C-terminus - a solubilized variant of CCL21 that functionally resembles CCL19. By generating a CCL21 concentration gradient DCs establish a positive feedback loop to recruit further DCs from the periphery to the CCL21 coated region. In addition DCs can sense chemotactic gradients as well as immobilized haptokinetic fields at the same time and integrate these signals. The result is chemotactically biased haptokinesis - directional migration confined to a chemokine coated track or area - which could explain the dynamic but spatially tightly controlled swarming leukocyte locomotion patterns that have been observed in lymphatic organs by intravital microscopists. The finding that DCs can approach soluble cues in a non-adhesive manner while they attach to surfaces coated with immobilized cues raises the question how these cells transmit intracellular forces to the environment, especially in the non-adherent migration mode. In order to migrate, cells have to generate and transmit force to the extracellular substrate. Force transmission is the prerequisite to procure an expansion of the leading edge and a forward motion of the whole cell body. In the current conceptions actin polymerization at the leading edge is coupled to extracellular ligands via the integrin family of transmembrane receptors, which allows the transmission of intracellular force. Against the paradigm of force transmission during migration, leukocytes, like DCs, are able to migrate in threedimensional environments without using integrin transmembrane receptors (Lämmermann et al., 2008). This reflects the biological function of leukocytes, as they can invade almost all tissues, whereby their migration has to be independent from the extracellular environment. How the cells can achieve this is unclear. For this study I examined DC migration in a defined threedimensional environment and highlighted actin-dynamics with the probe Lifeact-GFP. The result was that chemotactic DCs can switch between integrin-dependent and integrin- independent locomotion and can thereby adapt to the adhesive properties of their environment. If the cells are able to couple their actin cytoskeleton to the substrate, actin polymerization is entirely converted into protrusion. Without coupling the actin cortex undergoes slippage and retrograde actin flow can be observed. But retrograde actin flow can be completely compensated by higher actin polymerization rate keeping the migration velocity and the shape of the cells unaltered. Mesenchymal cells like fibroblast cannot balance the loss of adhesive interaction, cannot protrude into open space and, therefore, strictly depend on integrinmediated force coupling. This leukocyte specific phenomenon of “adaptive force transmission” endows these cells with the unique ability to transit and invade almost every type of tissue. }, author = {Schumann, Kathrin}, issn = {2663-337X}, pages = {141}, publisher = {Institute of Science and Technology Austria}, title = {{The role of chemotactic gradients in dendritic cell migration}}, year = {2011}, } @article{3287, abstract = {Diffusing membrane constituents are constantly exposed to a variety of forces that influence their stochastic path. Single molecule experiments allow for resolving trajectories at extremely high spatial and temporal accuracy, thereby offering insights into en route interactions of the tracer. In this review we discuss approaches to derive information about the underlying processes, based on single molecule tracking experiments. In particular, we focus on a new versatile way to analyze single molecule diffusion in the absence of a full analytical treatment. The method is based on comprehensive comparison of an experimental data set against the hypothetical outcome of multiple experiments performed on the computer. Since Monte Carlo simulations can be easily and rapidly performed even on state-of-the-art PCs, our method provides a simple way for testing various - even complicated - diffusion models. We describe the new method in detail, and show the applicability on two specific examples: firstly, kinetic rate constants can be derived for the transient interaction of mobile membrane proteins; secondly, residence time and corral size can be extracted for confined diffusion.}, author = {Ruprecht, Verena and Axmann, Markus and Wieser, Stefan and Schuetz, Gerhard}, journal = {Current Protein & Peptide Science}, number = {8}, pages = {714 -- 724}, publisher = {Bentham Science Publishers}, title = {{What can we learn from single molecule trajectories?}}, doi = {10.2174/138920311798841753}, volume = {12}, year = {2011}, } @article{3288, abstract = {The zonula adherens (ZA) of epithelial cells is a site of cell-cell adhesion where cellular forces are exerted and resisted. Increasing evidence indicates that E-cadherin adhesion molecules at the ZA serve to sense force applied on the junctions and coordinate cytoskeletal responses to those forces. Efforts to understand the role that cadherins play in mechanotransduction have been limited by the lack of assays to measure the impact of forces on the ZA. In this study we used 4D imaging of GFP-tagged E-cadherin to analyse the movement of the ZA. Junctions in confluent epithelial monolayers displayed prominent movements oriented orthogonal (perpendicular) to the ZA itself. Two components were identified in these movements: a relatively slow unidirectional (translational) component that could be readily fitted by least-squares regression analysis, upon which were superimposed more rapid oscillatory movements. Myosin IIB was a dominant factor responsible for driving the unilateral translational movements. In contrast, frequency spectrum analysis revealed that depletion of Myosin IIA increased the power of the oscillatory movements. This implies that Myosin IIA may serve to dampen oscillatory movements of the ZA. This extends our recent analysis of Myosin II at the ZA to demonstrate that Myosin IIA and Myosin IIB make distinct contributions to junctional movement at the ZA.}, author = {Smutny, Michael and Wu, Selwin and Gomez, Guillermo and Mangold, Sabine and Yap, Alpha and Hamilton, Nicholas}, journal = {PLoS One}, number = {7}, publisher = {Public Library of Science}, title = {{Multicomponent analysis of junctional movements regulated by Myosin II isoforms at the epithelial zonula adherens}}, doi = {10.1371/journal.pone.0022458}, volume = {6}, year = {2011}, } @article{3290, abstract = {Analysis of genomic data requires an efficient way to calculate likelihoods across very large numbers of loci. We describe a general method for finding the distribution of genealogies: we allow migration between demes, splitting of demes [as in the isolation-with-migration (IM) model], and recombination between linked loci. These processes are described by a set of linear recursions for the generating function of branch lengths. Under the infinite-sites model, the probability of any configuration of mutations can be found by differentiating this generating function. Such calculations are feasible for small numbers of sampled genomes: as an example, we show how the generating function can be derived explicitly for three genes under the two-deme IM model. This derivation is done automatically, using Mathematica. Given data from a large number of unlinked and nonrecombining blocks of sequence, these results can be used to find maximum-likelihood estimates of model parameters by tabulating the probabilities of all relevant mutational configurations and then multiplying across loci. The feasibility of the method is demonstrated by applying it to simulated data and to a data set previously analyzed by Wang and Hey (2010) consisting of 26,141 loci sampled from Drosophila simulans and D. melanogaster. Our results suggest that such likelihood calculations are scalable to genomic data as long as the numbers of sampled individuals and mutations per sequence block are small.}, author = {Lohse, Konrad and Harrison, Richard and Barton, Nicholas H}, journal = {Genetics}, number = {3}, pages = {977 -- 987}, publisher = {Genetics Society of America}, title = {{A general method for calculating likelihoods under the coalescent process}}, doi = {10.1534/genetics.111.129569}, volume = {189}, year = {2011}, } @inproceedings{3297, abstract = {Animating detailed liquid surfaces has always been a challenge for computer graphics researchers and visual effects artists. Over the past few years, researchers in this field have focused on mesh-based surface tracking to synthesize extremely detailed liquid surfaces as efficiently as possible. This course provides a solid understanding of the steps required to create a fluid simulator with a mesh-based liquid surface. The course begins with an overview of several existing liquid-surface-tracking techniques and the pros and cons of each method. Then it explains how to embed a triangle mesh into a finite-difference-based fluid simulator and describes several methods for allowing the liquid surface to merge together or break apart. The final section showcases the benefits and further applications of a mesh-based liquid surface, highlighting state-of-the-art methods for tracking colors and textures, maintaining liquid volume, preserving small surface features, and simulating realistic surface-tension waves.}, author = {Wojtan, Christopher J and Müller Fischer, Matthias and Brochu, Tyson}, location = {Vancouver, BC, Canada}, publisher = {ACM}, title = {{Liquid simulation with mesh-based surface tracking}}, doi = {10.1145/2037636.2037644}, year = {2011}, } @inproceedings{3298, abstract = {We present a new algorithm for enforcing incompressibility for Smoothed Particle Hydrodynamics (SPH) by preserving uniform density across the domain. We propose a hybrid method that uses a Poisson solve on a coarse grid to enforce a divergence free velocity field, followed by a local density correction of the particles. This avoids typical grid artifacts and maintains the Lagrangian nature of SPH by directly transferring pressures onto particles. Our method can be easily integrated with existing SPH techniques such as the incompressible PCISPH method as well as weakly compressible SPH by adding an additional force term. We show that this hybrid method accelerates convergence towards uniform density and permits a significantly larger time step compared to earlier approaches while producing similar results. We demonstrate our approach in a variety of scenarios with significant pressure gradients such as splashing liquids.}, author = {Raveendran, Karthik and Wojtan, Christopher J and Turk, Greg}, editor = {Spencer, Stephen}, location = {Vancouver, Canada}, pages = {33 -- 42}, publisher = {ACM}, title = {{Hybrid smoothed particle hydrodynamics}}, doi = {10.1145/2019406.2019411}, year = {2011}, }