@article{14404, abstract = {A light-triggered fabrication method extends the functionality of printable nanomaterials}, author = {Balazs, Daniel and Ibáñez, Maria}, issn = {1095-9203}, journal = {Science}, number = {6665}, pages = {1413--1414}, publisher = {AAAS}, title = {{Widening the use of 3D printing}}, doi = {10.1126/science.adk3070}, volume = {381}, year = {2023}, } @article{14434, abstract = {High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen evolution and reduction reactions (OER/ORR) as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW HEA nanoparticles are synthesized using a solution‐based low‐temperature approach. Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions, and modulated electronic structure, leading to superior OER performance with an overpotential of 233 mV at 10 mA cm−2 and 276 mV at 100 mA cm−2. Density functional theory calculations reveal the electronic structures of the FeCoNiMoW active sites with an optimized d‐band center position that enables suitable adsorption of OOH* intermediates and reduces the Gibbs free energy barrier in the OER process. Aqueous zinc–air batteries (ZABs) based on this HEA demonstrate a high open circuit potential of 1.59 V, a peak power density of 116.9 mW cm−2, a specific capacity of 857 mAh gZn−1, and excellent stability for over 660 h of continuous charge–discharge cycles. Flexible and solid ZABs are also assembled and tested, displaying excellent charge–discharge performance at different bending angles. This work shows the significance of 4d/5d metal‐modulated electronic structure and optimized adsorption ability to improve the performance of OER/ORR, ZABs, and beyond.}, author = {He, Ren and Yang, Linlin and Zhang, Yu and Jiang, Daochuan and Lee, Seungho and Horta, Sharona and Liang, Zhifu and Lu, Xuan and Ostovari Moghaddam, Ahmad and Li, Junshan and Ibáñez, Maria and Xu, Ying and Zhou, Yingtang and Cabot, Andreu}, issn = {0935-9648}, journal = {Advanced Materials}, keywords = {Mechanical Engineering, Mechanics of Materials, General Materials Science}, publisher = {Wiley}, title = {{A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen catalyst for robust aqueous zinc–air batteries}}, doi = {10.1002/adma.202303719}, year = {2023}, } @article{14435, abstract = {Low‐cost, safe, and environmental‐friendly rechargeable aqueous zinc‐ion batteries (ZIBs) are promising as next‐generation energy storage devices for wearable electronics among other applications. However, sluggish ionic transport kinetics and the unstable electrode structure during ionic insertion/extraction hampers their deployment. Herein,  we propose a new cathode material based on a layered metal chalcogenide (LMC), bismuth telluride (Bi2Te3), coated with polypyrrole (PPy). Taking advantage of the PPy coating, the Bi2Te3@PPy composite presents strong ionic absorption affinity, high oxidation resistance, and high structural stability. The ZIBs based on Bi2Te3@PPy cathodes exhibit high capacities and ultra‐long lifespans of over 5000 cycles. They also present outstanding stability even under bending. In addition,  we analyze here the reaction mechanism using in situ X‐ray diffraction, X‐ray photoelectron spectroscopy, and computational tools and demonstrate that, in the aqueous system, Zn2+ is not inserted into the cathode as previously assumed. In contrast, proton charge storage dominates the process. Overall, this work not only shows the great potential of LMCs as ZIBs cathode materials and the advantages of PPy coating, but also clarifies the charge/discharge mechanism in rechargeable ZIBs based on LMCs.}, author = {Zeng, Guifang and Sun, Qing and Horta, Sharona and Wang, Shang and Lu, Xuan and Zhang, Chaoyue and Li, Jing and Li, Junshan and Ci, Lijie and Tian, Yanhong and Ibáñez, Maria and Cabot, Andreu}, issn = {1521-4095}, journal = {Advanced Materials}, keywords = {Mechanical Engineering, Mechanics of Materials, General Materials Science}, publisher = {Wiley}, title = {{A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and application in printed flexible batteries}}, doi = {10.1002/adma.202305128}, year = {2023}, } @article{14719, abstract = {Lithium–sulfur batteries are regarded as an advantageous option for meeting the growing demand for high-energy-density storage, but their commercialization relies on solving the current limitations of both sulfur cathodes and lithium metal anodes. In this scenario, the implementation of lithium sulfide (Li2S) cathodes compatible with alternative anode materials such as silicon has the potential to alleviate the safety concerns associated with lithium metal. In this direction, here, we report a sulfur cathode based on Li2S nanocrystals grown on a catalytic host consisting of CoFeP nanoparticles supported on tubular carbon nitride. Nanosized Li2S is incorporated into the host by a scalable liquid infiltration–evaporation method. Theoretical calculations and experimental results demonstrate that the CoFeP–CN composite can boost the polysulfide adsorption/conversion reaction kinetics and strongly reduce the initial overpotential activation barrier by stretching the Li–S bonds of Li2S. Besides, the ultrasmall size of the Li2S particles in the Li2S–CoFeP–CN composite cathode facilitates the initial activation. Overall, the Li2S–CoFeP–CN electrodes exhibit a low activation barrier of 2.56 V, a high initial capacity of 991 mA h gLi2S–1, and outstanding cyclability with a small fading rate of 0.029% per cycle over 800 cycles. Moreover, Si/Li2S full cells are assembled using the nanostructured Li2S–CoFeP–CN cathode and a prelithiated anode based on graphite-supported silicon nanowires. These Si/Li2S cells demonstrate high initial discharge capacities above 900 mA h gLi2S–1 and good cyclability with a capacity fading rate of 0.28% per cycle over 150 cycles.}, author = {Mollania, Hamid and Zhang, Chaoqi and Du, Ruifeng and Qi, Xueqiang and Li, Junshan and Horta, Sharona and Ibáñez, Maria and Keller, Caroline and Chenevier, Pascale and Oloomi-Buygi, Majid and Cabot, Andreu}, issn = {1944-8252}, journal = {ACS Applied Materials and Interfaces}, number = {50}, pages = {58462–58475}, publisher = {American Chemical Society}, title = {{Nanostructured Li₂S cathodes for silicon-sulfur batteries}}, doi = {10.1021/acsami.3c14072}, volume = {15}, year = {2023}, } @article{14734, abstract = {Developing cost-effective and high-performance thermoelectric (TE) materials to assemble efficient TE devices presents a multitude of challenges and opportunities. Cu3SbSe4 is a promising p-type TE material based on relatively earth abundant elements. However, the challenge lies in its poor electrical conductivity. Herein, an efficient and scalable solution-based approach is developed to synthesize high-quality Cu3SbSe4 nanocrystals doped with Pb at the Sb site. After ligand displacement and annealing treatments, the dried powders are consolidated into dense pellets, and their TE properties are investigated. Pb doping effectively increases the charge carrier concentration, resulting in a significant increase in electrical conductivity, while the Seebeck coefficients remain consistently high. The calculated band structure shows that Pb doping induces band convergence, thereby increasing the effective mass. Furthermore, the large ionic radius of Pb2+ results in the generation of additional point and plane defects and interphases, dramatically enhancing phonon scattering, which significantly decreases the lattice thermal conductivity at high temperatures. Overall, a maximum figure of merit (zTmax) ≈ 0.85 at 653 K is obtained in Cu3Sb0.97Pb0.03Se4. This represents a 1.6-fold increase compared to the undoped sample and exceeds most doped Cu3SbSe4-based materials produced by solid-state, demonstrating advantages of versatility and cost-effectiveness using a solution-based technology.}, author = {Wan, Shanhong and Xiao, Shanshan and Li, Mingquan and Wang, Xin and Lim, Khak Ho and Hong, Min and Ibáñez, Maria and Cabot, Andreu and Liu, Yu}, issn = {2366-9608}, journal = {Small Methods}, publisher = {Wiley}, title = {{Band engineering through Pb-doping of nanocrystal building blocks to enhance thermoelectric performance in Cu3SbSe4}}, doi = {10.1002/smtd.202301377}, year = {2023}, } @article{13092, abstract = {There is a need for the development of lead-free thermoelectric materials for medium-/high-temperature applications. Here, we report a thiol-free tin telluride (SnTe) precursor that can be thermally decomposed to produce SnTe crystals with sizes ranging from tens to several hundreds of nanometers. We further engineer SnTe–Cu2SnTe3 nanocomposites with a homogeneous phase distribution by decomposing the liquid SnTe precursor containing a dispersion of Cu1.5Te colloidal nanoparticles. The presence of Cu within the SnTe and the segregated semimetallic Cu2SnTe3 phase effectively improves the electrical conductivity of SnTe while simultaneously reducing the lattice thermal conductivity without compromising the Seebeck coefficient. Overall, power factors up to 3.63 mW m–1 K–2 and thermoelectric figures of merit up to 1.04 are obtained at 823 K, which represent a 167% enhancement compared with pristine SnTe.}, author = {Nan, Bingfei and Song, Xuan and Chang, Cheng and Xiao, Ke and Zhang, Yu and Yang, Linlin and Horta, Sharona and Li, Junshan and Lim, Khak Ho and Ibáñez, Maria and Cabot, Andreu}, issn = {1944-8252}, journal = {ACS Applied Materials and Interfaces}, number = {19}, pages = {23380–23389}, publisher = {American Chemical Society}, title = {{Bottom-up synthesis of SnTe-based thermoelectric composites}}, doi = {10.1021/acsami.3c00625}, volume = {15}, year = {2023}, } @article{13093, abstract = {The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (Ag2Se) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce Ag2Se, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0.76 at 380 K. To improve these values, bismuth sulfide (Bi2S3) particles also prepared in an aqueous solution are incorporated into the Ag2Se matrix. In this way, a series of Ag2Se/Bi2S3 composites with Bi2S3 wt % of 0.5, 1.0, and 1.5 are prepared by solution blending and hot-press sintering. The presence of Bi2S3 significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0.96 is achieved in the composites with 1.0 wt % Bi2S3 at 370 K. Furthermore, a high average zT value (zTave) of 0.93 in the 300–390 K range is demonstrated.}, author = {Nan, Bingfei and Li, Mengyao and Zhang, Yu and Xiao, Ke and Lim, Khak Ho and Chang, Cheng and Han, Xu and Zuo, Yong and Li, Junshan and Arbiol, Jordi and Llorca, Jordi and Ibáñez, Maria and Cabot, Andreu}, issn = {2637-6113}, journal = {ACS Applied Electronic Materials}, publisher = {American Chemical Society}, title = {{Engineering of thermoelectric composites based on silver selenide in aqueous solution and ambient temperature}}, doi = {10.1021/acsaelm.3c00055}, year = {2023}, } @article{13235, abstract = {AgSbSe2 is a promising thermoelectric (TE) p-type material for applications in the middle-temperature range. AgSbSe2 is characterized by relatively low thermal conductivities and high Seebeck coefficients, but its main limitation is moderate electrical conductivity. Herein, we detail an efficient and scalable hot-injection synthesis route to produce AgSbSe2 nanocrystals (NCs). To increase the carrier concentration and improve the electrical conductivity, these NCs are doped with Sn2+ on Sb3+ sites. Upon processing, the Sn2+ chemical state is conserved using a reducing NaBH4 solution to displace the organic ligand and anneal the material under a forming gas flow. The TE properties of the dense materials obtained from the consolidation of the NCs using a hot pressing are then characterized. The presence of Sn2+ ions replacing Sb3+ significantly increases the charge carrier concentration and, consequently, the electrical conductivity. Opportunely, the measured Seebeck coefficient varied within a small range upon Sn doping. The excellent performance obtained when Sn2+ ions are prevented from oxidation is rationalized by modeling the system. Calculated band structures disclosed that Sn doping induces convergence of the AgSbSe2 valence bands, accounting for an enhanced electronic effective mass. The dramatically enhanced carrier transport leads to a maximized power factor for AgSb0.98Sn0.02Se2 of 0.63 mW m–1 K–2 at 640 K. Thermally, phonon scattering is significantly enhanced in the NC-based materials, yielding an ultralow thermal conductivity of 0.3 W mK–1 at 666 K. Overall, a record-high figure of merit (zT) is obtained at 666 K for AgSb0.98Sn0.02Se2 at zT = 1.37, well above the values obtained for undoped AgSbSe2, at zT = 0.58 and state-of-art Pb- and Te-free materials, which makes AgSb0.98Sn0.02Se2 an excellent p-type candidate for medium-temperature TE applications.}, author = {Liu, Yu and Li, Mingquan and Wan, Shanhong and Lim, Khak Ho and Zhang, Yu and Li, Mengyao and Li, Junshan and Ibáñez, Maria and Hong, Min and Cabot, Andreu}, issn = {1936-086X}, journal = {ACS Nano}, number = {12}, pages = {11923–11934}, publisher = {American Chemical Society}, title = {{Surface chemistry and band engineering in AgSbSe₂: Toward high thermoelectric performance}}, doi = {10.1021/acsnano.3c03541}, volume = {17}, year = {2023}, } @article{13968, abstract = {The use of multimodal readout mechanisms next to label-free real-time monitoring of biomolecular interactions can provide valuable insight into surface-based reaction mechanisms. To this end, the combination of an electrolyte-gated field-effect transistor (EG-FET) with a fiber optic-coupled surface plasmon resonance (FO-SPR) probe serving as gate electrode has been investigated to deconvolute surface mass and charge density variations associated to surface reactions. However, applying an electrochemical potential on such gold-coated FO-SPR gate electrodes can induce gradual morphological changes of the thin gold film, leading to an irreversible blue-shift of the SPR wavelength and a substantial signal drift. We show that mild annealing leads to optical and electronic signal stabilization (20-fold lower signal drift than as-sputtered fiber optic gates) and improved overall analytical performance characteristics. The thermal treatment prevents morphological changes of the thin gold-film occurring during operation, hence providing reliable and stable data immediately upon gate voltage application. Thus, the readout output of both transducing principles, the optical FO-SPR and electronic EG-FET, stays constant throughout the whole sensing time-window and the long-term effect of thermal treatment is also improved, providing stable signals even after 1 year of storage. Annealing should therefore be considered a necessary modification for applying fiber optic gate electrodes in real-time multimodal investigations of surface reactions at the solid-liquid interface.}, author = {Hasler, Roger and Steger-Polt, Marie Helene and Reiner-Rozman, Ciril and Fossati, Stefan and Lee, Seungho and Aspermair, Patrik and Kleber, Christoph and Ibáñez, Maria and Dostalek, Jakub and Knoll, Wolfgang}, issn = {2296-424X}, journal = {Frontiers in Physics}, publisher = {Frontiers}, title = {{Optical and electronic signal stabilization of plasmonic fiber optic gate electrodes: Towards improved real-time dual-mode biosensing}}, doi = {10.3389/fphy.2023.1202132}, volume = {11}, year = {2023}, } @article{12829, abstract = {The deployment of direct formate fuel cells (DFFCs) relies on the development of active and stable catalysts for the formate oxidation reaction (FOR). Palladium, providing effective full oxidation of formate to CO2, has been widely used as FOR catalyst, but it suffers from low stability, moderate activity, and high cost. Herein, we detail a colloidal synthesis route for the incorporation of P on Pd2Sn nanoparticles. These nanoparticles are dispersed on carbon black and the obtained composite is used as electrocatalytic material for the FOR. The Pd2Sn0.8P-based electrodes present outstanding catalytic activities with record mass current densities up to 10.0 A mgPd-1, well above those of Pd1.6Sn/C reference electrode. These high current densities are further enhanced by increasing the temperature from 25 °C to 40 °C. The Pd2Sn0.8P electrode also allows for slowing down the rapid current decay that generally happens during operation and can be rapidly re-activated through potential cycling. The excellent catalytic performance obtained is rationalized using density functional theory (DFT) calculations.}, author = {Montaña-Mora, Guillem and Qi, Xueqiang and Wang, Xiang and Chacón-Borrero, Jesus and Martinez-Alanis, Paulina R. and Yu, Xiaoting and Li, Junshan and Xue, Qian and Arbiol, Jordi and Ibáñez, Maria and Cabot, Andreu}, issn = {1572-6657}, journal = {Journal of Electroanalytical Chemistry}, publisher = {Elsevier}, title = {{Phosphorous incorporation into palladium tin nanoparticles for the electrocatalytic formate oxidation reaction}}, doi = {10.1016/j.jelechem.2023.117369}, volume = {936}, year = {2023}, } @article{12832, abstract = {The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc–air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm2, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO2. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm2, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm2 and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm2.}, author = {He, Ren and Yang, Linlin and Zhang, Yu and Wang, Xiang and Lee, Seungho and Zhang, Ting and Li, Lingxiao and Liang, Zhifu and Chen, Jingwei and Li, Junshan and Ostovari Moghaddam, Ahmad and Llorca, Jordi and Ibáñez, Maria and Arbiol, Jordi and Xu, Ying and Cabot, Andreu}, issn = {2405-8297}, journal = {Energy Storage Materials}, number = {4}, pages = {287--298}, publisher = {Elsevier}, title = {{A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance}}, doi = {10.1016/j.ensm.2023.03.022}, volume = {58}, year = {2023}, } @article{12915, abstract = {Cu2–xS and Cu2–xSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, Cu2–xTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of Cu1.5–xTe–Cu2Se nanocomposites by consolidating surface-engineered Cu1.5Te nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in Cu1.5–xTe–Cu2Se nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of Cu2Se generated around Cu1.5–xTe nanoparticles effectively inhibits Cu1.5–xTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K.}, author = {Xing, Congcong and Zhang, Yu and Xiao, Ke and Han, Xu and Liu, Yu and Nan, Bingfei and Ramon, Maria Garcia and Lim, Khak Ho and Li, Junshan and Arbiol, Jordi and Poudel, Bed and Nozariasbmarz, Amin and Li, Wenjie and Ibáñez, Maria and Cabot, Andreu}, issn = {1936-086X}, journal = {ACS Nano}, number = {9}, pages = {8442--8452}, publisher = {American Chemical Society}, title = {{Thermoelectric performance of surface-engineered Cu1.5–xTe–Cu2Se nanocomposites}}, doi = {10.1021/acsnano.3c00495}, volume = {17}, year = {2023}, } @article{10829, abstract = {A novel multivariable system, combining a transistor with fiber optic-based surface plasmon resonance spectroscopy with the gate electrode simultaneously acting as the fiber optic sensor surface, is reported. The dual-mode sensor allows for discrimination of mass and charge contributions for binding assays on the same sensor surface. Furthermore, we optimize the sensor geometry by investigating the influence of the fiber area to transistor channel area ratio and distance. We show that larger fiber optic tip diameters are favorable for electronic and optical signals and demonstrate the reversibility of plasmon resonance wavelength shifts after electric field application. As a proof of principle, a layer-by-layer assembly of polyelectrolytes is performed to benchmark the system against multivariable sensing platforms with planar surface plasmon resonance configurations. Furthermore, the biosensing performance is assessed using a thrombin binding assay with surface-immobilized aptamers as receptors, allowing for the detection of medically relevant thrombin concentrations.}, author = {Hasler, Roger and Reiner-Rozman, Ciril and Fossati, Stefan and Aspermair, Patrik and Dostalek, Jakub and Lee, Seungho and Ibáñez, Maria and Bintinger, Johannes and Knoll, Wolfgang}, issn = {23793694}, journal = {ACS Sensors}, number = {2}, pages = {504--512}, publisher = {American Chemical Society}, title = {{Field-effect transistor with a plasmonic fiber optic gate electrode as a multivariable biosensor device}}, doi = {10.1021/acssensors.1c02313}, volume = {7}, year = {2022}, } @misc{10833, abstract = {Detailed information about the data set see "dataset description.txt" file.}, author = {Hasler, Roger and Reiner-Rozman, Ciril and Fossati, Stefan and Aspermair, Patrik and Dostalek, Jakub and Lee, Seungho and Ibáñez, Maria and Bintinger, Johannes and Knoll, Wolfgang}, publisher = {Zenodo}, title = {{Field-effect transistor with a plasmonic fiber optic gate electrode as a multivariable biosensor device}}, doi = {10.5281/ZENODO.5500360}, year = {2022}, } @article{11451, abstract = {The precursor conversion chemistry and surface chemistry of Cu3N and Cu3PdN nanocrystals are unknown or contested. Here, we first obtain phase-pure, colloidally stable nanocubes. Second, we elucidate the pathway by which copper(II) nitrate and oleylamine form Cu3N. We find that oleylamine is both a reductant and a nitrogen source. Oleylamine is oxidized by nitrate to a primary aldimine, which reacts further with excess oleylamine to a secondary aldimine, eliminating ammonia. Ammonia reacts with CuI to form Cu3N. Third, we investigated the surface chemistry and find a mixed ligand shell of aliphatic amines and carboxylates (formed in situ). While the carboxylates appear tightly bound, the amines are easily desorbed from the surface. Finally, we show that doping with palladium decreases the band gap and the material becomes semi-metallic. These results bring insight into the chemistry of metal nitrides and might help the development of other metal nitride nanocrystals.}, author = {Parvizian, Mahsa and Duràn Balsa, Alejandra and Pokratath, Rohan and Kalha, Curran and Lee, Seungho and Van Den Eynden, Dietger and Ibáñez, Maria and Regoutz, Anna and De Roo, Jonathan}, issn = {1521-3773}, journal = {Angewandte Chemie - International Edition}, number = {31}, publisher = {Wiley}, title = {{The chemistry of Cu₃N and Cu₃PdN nanocrystals}}, doi = {10.1002/anie.202207013}, volume = {61}, year = {2022}, } @misc{11695, abstract = {Data underlying the figures in the publication "The chemistry of Cu3N and Cu3PdN nanocrystals" }, author = {Parvizian, Mahsa and Duran Balsa, Alejandra and Pokratath, Rohan and Kalha, Curran and Lee, Seungho and Van den Eynden, Dietger and Ibáñez, Maria and Regoutz, Anna and De Roo, Jonathan}, publisher = {Zenodo}, title = {{Data for "The chemistry of Cu3N and Cu3PdN nanocrystals"}}, doi = {10.5281/ZENODO.6542908}, year = {2022}, } @article{11705, abstract = {The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing “naked” particles’ surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles’ surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-Bi2S3 nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-Bi2S3 nanocomposites exhibit peak z T up to 1.3 at 873 K and an average z T of ≈0.6 at 300–873 K, which is among the highest reported for solution-processed SnTe.}, author = {Chang, Cheng and Liu, Yu and Lee, Seungho and Spadaro, Maria and Koskela, Kristopher M. and Kleinhanns, Tobias and Costanzo, Tommaso and Arbiol, Jordi and Brutchey, Richard L. and Ibáñez, Maria}, issn = {1521-3773}, journal = {Angewandte Chemie - International Edition}, number = {35}, publisher = {Wiley}, title = {{Surface functionalization of surfactant-free particles: A strategy to tailor the properties of nanocomposites for enhanced thermoelectric performance}}, doi = {10.1002/anie.202207002}, volume = {61}, year = {2022}, } @article{14437, abstract = {Future LEDs could be based on lead halide perovskites. A breakthrough in preparing device-compatible solids composed of nanoscale perovskite crystals overcomes a long-standing hurdle in making blue perovskite LEDs.}, author = {Utzat, Hendrik and Ibáñez, Maria}, issn = {1476-4687}, journal = {Nature}, keywords = {Multidisciplinary}, number = {7941}, pages = {638--639}, publisher = {Springer Nature}, title = {{Molecular engineering enables bright blue LEDs}}, doi = {10.1038/d41586-022-04447-0}, volume = {612}, year = {2022}, } @article{10042, abstract = {SnSe has emerged as one of the most promising materials for thermoelectric energy conversion due to its extraordinary performance in its single-crystal form and its low-cost constituent elements. However, to achieve an economic impact, the polycrystalline counterpart needs to replicate the performance of the single crystal. Herein, we optimize the thermoelectric performance of polycrystalline SnSe produced by consolidating solution-processed and surface-engineered SnSe particles. In particular, the SnSe particles are coated with CdSe molecular complexes that crystallize during the sintering process, forming CdSe nanoparticles. The presence of CdSe nanoparticles inhibits SnSe grain growth during the consolidation step due to Zener pinning, yielding a material with a high density of grain boundaries. Moreover, the resulting SnSe–CdSe nanocomposites present a large number of defects at different length scales, which significantly reduce the thermal conductivity. The produced SnSe–CdSe nanocomposites exhibit thermoelectric figures of merit up to 2.2 at 786 K, which is among the highest reported for solution-processed SnSe.}, author = {Liu, Yu and Calcabrini, Mariano and Yu, Yuan and Lee, Seungho and Chang, Cheng and David, Jérémy and Ghosh, Tanmoy and Spadaro, Maria Chiara and Xie, Chenyang and Cojocaru-Mirédin, Oana and Arbiol, Jordi and Ibáñez, Maria}, issn = {1936-086X}, journal = {ACS Nano}, keywords = {tin selenide, nanocomposite, grain growth, Zener pinning, thermoelectricity, annealing, solution processing}, number = {1}, pages = {78--88}, publisher = {American Chemical Society }, title = {{Defect engineering in solution-processed polycrystalline SnSe leads to high thermoelectric performance}}, doi = {10.1021/acsnano.1c06720}, volume = {16}, year = {2022}, } @article{10566, abstract = {A versatile, scalable, room temperature and surfactant-free route for the synthesis of metal chalcogenide nanoparticles in aqueous solution is detailed here for the production of PbS and Cu-doped PbS nanoparticles. Subsequently, nanoparticles are annealed in a reducing atmosphere to remove surface oxide, and consolidated into dense polycrystalline materials by means of spark plasma sintering. By characterizing the transport properties of the sintered material, we observe the annealing step and the incorporation of Cu to play a key role in promoting the thermoelectric performance of PbS. The presence of Cu allows improving the electrical conductivity by increasing the charge carrier concentration and simultaneously maintaining a large charge carrier mobility, which overall translates into record power factors at ambient temperature, 2.3 mWm-1K−2. Simultaneously, the lattice thermal conductivity decreases with the introduction of Cu, leading to a record high ZT = 0.37 at room temperature and ZT = 1.22 at 773 K. Besides, a record average ZTave = 0.76 is demonstrated in the temperature range 320–773 K for n-type Pb0.955Cu0.045S.}, author = {Li, Mengyao and Liu, Yu and Zhang, Yu and Chang, Cheng and Zhang, Ting and Yang, Dawei and Xiao, Ke and Arbiol, Jordi and Ibáñez, Maria and Cabot, Andreu}, issn = {1385-8947}, journal = {Chemical Engineering Journal}, publisher = {Elsevier}, title = {{Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application}}, doi = {10.1016/j.cej.2021.133837}, volume = {433}, year = {2022}, }