---
_id: '15018'
abstract:
- lang: eng
  text: The epitaxial growth of a strained Ge layer, which is a promising candidate
    for the channel material of a hole spin qubit, has been demonstrated on 300 mm
    Si wafers using commercially available Si0.3Ge0.7 strain relaxed buffer (SRB)
    layers. The assessment of the layer and the interface qualities for a buried strained
    Ge layer embedded in Si0.3Ge0.7 layers is reported. The XRD reciprocal space mapping
    confirmed that the reduction of the growth temperature enables the 2-dimensional
    growth of the Ge layer fully strained with respect to the Si0.3Ge0.7. Nevertheless,
    dislocations at the top and/or bottom interface of the Ge layer were observed
    by means of electron channeling contrast imaging, suggesting the importance of
    the careful dislocation assessment. The interface abruptness does not depend on
    the selection of the precursor gases, but it is strongly influenced by the growth
    temperature which affects the coverage of the surface H-passivation. The mobility
    of 2.7 × 105 cm2/Vs is promising, while the low percolation density of 3 × 1010
    /cm2 measured with a Hall-bar device at 7 K illustrates the high quality of the
    heterostructure thanks to the high Si0.3Ge0.7 SRB quality.
acknowledgement: The Ge project received funding from the European Union's Horizon
  Europe programme under the Grant Agreement 101069515 – IGNITE. Siltronic AG is acknowledged
  for providing the SRB wafers. This work was supported by Imec's Industrial Affiliation
  Program on Quantum Computing.
article_number: '108231'
article_processing_charge: No
article_type: original
author:
- first_name: Yosuke
  full_name: Shimura, Yosuke
  last_name: Shimura
- first_name: Clement
  full_name: Godfrin, Clement
  last_name: Godfrin
- first_name: Andriy
  full_name: Hikavyy, Andriy
  last_name: Hikavyy
- first_name: Roy
  full_name: Li, Roy
  last_name: Li
- first_name: Juan L
  full_name: Aguilera Servin, Juan L
  id: 2A67C376-F248-11E8-B48F-1D18A9856A87
  last_name: Aguilera Servin
  orcid: 0000-0002-2862-8372
- first_name: Georgios
  full_name: Katsaros, Georgios
  id: 38DB5788-F248-11E8-B48F-1D18A9856A87
  last_name: Katsaros
  orcid: 0000-0001-8342-202X
- first_name: Paola
  full_name: Favia, Paola
  last_name: Favia
- first_name: Han
  full_name: Han, Han
  last_name: Han
- first_name: Danny
  full_name: Wan, Danny
  last_name: Wan
- first_name: Kristiaan
  full_name: de Greve, Kristiaan
  last_name: de Greve
- first_name: Roger
  full_name: Loo, Roger
  last_name: Loo
citation:
  ama: Shimura Y, Godfrin C, Hikavyy A, et al. Compressively strained epitaxial Ge
    layers for quantum computing applications. <i>Materials Science in Semiconductor
    Processing</i>. 2024;174(5). doi:<a href="https://doi.org/10.1016/j.mssp.2024.108231">10.1016/j.mssp.2024.108231</a>
  apa: Shimura, Y., Godfrin, C., Hikavyy, A., Li, R., Aguilera Servin, J. L., Katsaros,
    G., … Loo, R. (2024). Compressively strained epitaxial Ge layers for quantum computing
    applications. <i>Materials Science in Semiconductor Processing</i>. Elsevier.
    <a href="https://doi.org/10.1016/j.mssp.2024.108231">https://doi.org/10.1016/j.mssp.2024.108231</a>
  chicago: Shimura, Yosuke, Clement Godfrin, Andriy Hikavyy, Roy Li, Juan L Aguilera
    Servin, Georgios Katsaros, Paola Favia, et al. “Compressively Strained Epitaxial
    Ge Layers for Quantum Computing Applications.” <i>Materials Science in Semiconductor
    Processing</i>. Elsevier, 2024. <a href="https://doi.org/10.1016/j.mssp.2024.108231">https://doi.org/10.1016/j.mssp.2024.108231</a>.
  ieee: Y. Shimura <i>et al.</i>, “Compressively strained epitaxial Ge layers for
    quantum computing applications,” <i>Materials Science in Semiconductor Processing</i>,
    vol. 174, no. 5. Elsevier, 2024.
  ista: Shimura Y, Godfrin C, Hikavyy A, Li R, Aguilera Servin JL, Katsaros G, Favia
    P, Han H, Wan D, de Greve K, Loo R. 2024. Compressively strained epitaxial Ge
    layers for quantum computing applications. Materials Science in Semiconductor
    Processing. 174(5), 108231.
  mla: Shimura, Yosuke, et al. “Compressively Strained Epitaxial Ge Layers for Quantum
    Computing Applications.” <i>Materials Science in Semiconductor Processing</i>,
    vol. 174, no. 5, 108231, Elsevier, 2024, doi:<a href="https://doi.org/10.1016/j.mssp.2024.108231">10.1016/j.mssp.2024.108231</a>.
  short: Y. Shimura, C. Godfrin, A. Hikavyy, R. Li, J.L. Aguilera Servin, G. Katsaros,
    P. Favia, H. Han, D. Wan, K. de Greve, R. Loo, Materials Science in Semiconductor
    Processing 174 (2024).
date_created: 2024-02-22T14:10:40Z
date_published: 2024-02-20T00:00:00Z
date_updated: 2024-02-26T10:36:35Z
day: '20'
ddc:
- '530'
department:
- _id: GeKa
- _id: NanoFab
doi: 10.1016/j.mssp.2024.108231
has_accepted_license: '1'
intvolume: '       174'
issue: '5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.1016/j.mssp.2024.108231
month: '02'
oa: 1
oa_version: Published Version
project:
- _id: 34c0acea-11ca-11ed-8bc3-8775e10fd452
  grant_number: '101069515'
  name: Integrated GermaNIum quanTum tEchnology
publication: Materials Science in Semiconductor Processing
publication_identifier:
  issn:
  - 1369-8001
publication_status: epub_ahead
publisher: Elsevier
quality_controlled: '1'
status: public
title: Compressively strained epitaxial Ge layers for quantum computing applications
tmp:
  image: /images/cc_by.png
  legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
  name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
  short: CC BY (4.0)
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 174
year: '2024'
...
---
_id: '14434'
abstract:
- lang: eng
  text: High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen
    evolution and reduction reactions (OER/ORR) as they offer numerous parameters
    for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW
    HEA nanoparticles are synthesized using a solution‐based low‐temperature approach.
    Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions,
    and modulated electronic structure, leading to superior OER performance with an
    overpotential of 233 mV at 10 mA cm<jats:sup>−2</jats:sup> and 276 mV at 100 mA cm<jats:sup>−2</jats:sup>.
    Density functional theory calculations reveal the electronic structures of the
    FeCoNiMoW active sites with an optimized d‐band center position that enables suitable
    adsorption of OOH* intermediates and reduces the Gibbs free energy barrier in
    the OER process. Aqueous zinc–air batteries (ZABs) based on this HEA demonstrate
    a high open circuit potential of 1.59 V, a peak power density of 116.9 mW cm<jats:sup>−2</jats:sup>,
    a specific capacity of 857 mAh g<jats:sub>Zn</jats:sub><jats:sup>−1</jats:sup><jats:sub>,</jats:sub>
    and excellent stability for over 660 h of continuous charge–discharge cycles.
    Flexible and solid ZABs are also assembled and tested, displaying excellent charge–discharge
    performance at different bending angles. This work shows the significance of 4d/5d
    metal‐modulated electronic structure and optimized adsorption ability to improve
    the performance of OER/ORR, ZABs, and beyond.
acknowledged_ssus:
- _id: EM-Fac
acknowledgement: The authors acknowledge funding from Generalitat de Catalunya 2021
  SGR 01581; the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio
  de Ciencia e Innovación; the National Natural Science Foundation of China (22102002);
  the Anhui Provincial Natural Science Foundation (2108085QE192); Zhejiang Province
  key research and development project (2023C01191); the Foundation of State Key Laboratory
  of High-efficiency Utilization of Coal and Green Chemical Engineering (GrantNo.2022-K31);
  and The Key Research and Development Program of Hebei Province (20314305D). IREC
  is funded by the CERCA Programme from the Generalitat de Catalunya. L.L.Y. thanks
  the China Scholarship Council (CSC) for the scholarship support (202008130132).
  This research was supported by the Scientific Service Units (SSU) of ISTA (Institute
  of Science and Technology Austria) through resources provided by the Electron Microscopy
  Facility (EMF). S.L., S.H., and M.I. acknowledge funding by ISTA and the Werner
  Siemens.
article_number: '2303719'
article_processing_charge: No
article_type: original
author:
- first_name: Ren
  full_name: He, Ren
  last_name: He
- first_name: Linlin
  full_name: Yang, Linlin
  last_name: Yang
- first_name: Yu
  full_name: Zhang, Yu
  last_name: Zhang
- first_name: Daochuan
  full_name: Jiang, Daochuan
  last_name: Jiang
- first_name: Seungho
  full_name: Lee, Seungho
  id: BB243B88-D767-11E9-B658-BC13E6697425
  last_name: Lee
  orcid: 0000-0002-6962-8598
- first_name: Sharona
  full_name: Horta, Sharona
  id: 03a7e858-01b1-11ec-8b71-99ae6c4a05bc
  last_name: Horta
- first_name: Zhifu
  full_name: Liang, Zhifu
  last_name: Liang
- first_name: Xuan
  full_name: Lu, Xuan
  last_name: Lu
- first_name: Ahmad
  full_name: Ostovari Moghaddam, Ahmad
  last_name: Ostovari Moghaddam
- first_name: Junshan
  full_name: Li, Junshan
  last_name: Li
- first_name: Maria
  full_name: Ibáñez, Maria
  id: 43C61214-F248-11E8-B48F-1D18A9856A87
  last_name: Ibáñez
  orcid: 0000-0001-5013-2843
- first_name: Ying
  full_name: Xu, Ying
  last_name: Xu
- first_name: Yingtang
  full_name: Zhou, Yingtang
  last_name: Zhou
- first_name: Andreu
  full_name: Cabot, Andreu
  last_name: Cabot
citation:
  ama: He R, Yang L, Zhang Y, et al. A 3d‐4d‐5d high entropy alloy as a bifunctional
    oxygen catalyst for robust aqueous zinc–air batteries. <i>Advanced Materials</i>.
    2023. doi:<a href="https://doi.org/10.1002/adma.202303719">10.1002/adma.202303719</a>
  apa: He, R., Yang, L., Zhang, Y., Jiang, D., Lee, S., Horta, S., … Cabot, A. (2023).
    A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen catalyst for robust aqueous
    zinc–air batteries. <i>Advanced Materials</i>. Wiley. <a href="https://doi.org/10.1002/adma.202303719">https://doi.org/10.1002/adma.202303719</a>
  chicago: He, Ren, Linlin Yang, Yu Zhang, Daochuan Jiang, Seungho Lee, Sharona Horta,
    Zhifu Liang, et al. “A 3d‐4d‐5d High Entropy Alloy as a Bifunctional Oxygen Catalyst
    for Robust Aqueous Zinc–Air Batteries.” <i>Advanced Materials</i>. Wiley, 2023.
    <a href="https://doi.org/10.1002/adma.202303719">https://doi.org/10.1002/adma.202303719</a>.
  ieee: R. He <i>et al.</i>, “A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen
    catalyst for robust aqueous zinc–air batteries,” <i>Advanced Materials</i>. Wiley,
    2023.
  ista: He R, Yang L, Zhang Y, Jiang D, Lee S, Horta S, Liang Z, Lu X, Ostovari Moghaddam
    A, Li J, Ibáñez M, Xu Y, Zhou Y, Cabot A. 2023. A 3d‐4d‐5d high entropy alloy
    as a bifunctional oxygen catalyst for robust aqueous zinc–air batteries. Advanced
    Materials., 2303719.
  mla: He, Ren, et al. “A 3d‐4d‐5d High Entropy Alloy as a Bifunctional Oxygen Catalyst
    for Robust Aqueous Zinc–Air Batteries.” <i>Advanced Materials</i>, 2303719, Wiley,
    2023, doi:<a href="https://doi.org/10.1002/adma.202303719">10.1002/adma.202303719</a>.
  short: R. He, L. Yang, Y. Zhang, D. Jiang, S. Lee, S. Horta, Z. Liang, X. Lu, A.
    Ostovari Moghaddam, J. Li, M. Ibáñez, Y. Xu, Y. Zhou, A. Cabot, Advanced Materials
    (2023).
date_created: 2023-10-17T10:52:23Z
date_published: 2023-07-24T00:00:00Z
date_updated: 2023-12-13T13:03:23Z
day: '24'
department:
- _id: MaIb
doi: 10.1002/adma.202303719
external_id:
  isi:
  - '001083876900001'
  pmid:
  - '37487245'
isi: 1
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '07'
oa_version: None
pmid: 1
project:
- _id: 9B8F7476-BA93-11EA-9121-9846C619BF3A
  name: 'HighTE: The Werner Siemens Laboratory for the High Throughput Discovery of
    Semiconductors for Waste Heat Recovery'
publication: Advanced Materials
publication_identifier:
  issn:
  - 0935-9648
  - 1521-4095
publication_status: epub_ahead
publisher: Wiley
quality_controlled: '1'
status: public
title: A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen catalyst for robust
  aqueous zinc–air batteries
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
year: '2023'
...
---
_id: '14435'
abstract:
- lang: eng
  text: Low‐cost, safe, and environmental‐friendly rechargeable aqueous zinc‐ion batteries
    (ZIBs) are promising as next‐generation energy storage devices for wearable electronics
    among other applications. However, sluggish ionic transport kinetics and the unstable
    electrode structure during ionic insertion/extraction hampers their deployment.
    Herein,  we propose a new cathode material based on a layered metal chalcogenide
    (LMC), bismuth telluride (Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>), coated
    with polypyrrole (PPy). Taking advantage of the PPy coating, the Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>@PPy
    composite presents strong ionic absorption affinity, high oxidation resistance,
    and high structural stability. The ZIBs based on Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>@PPy
    cathodes exhibit high capacities and ultra‐long lifespans of over 5000 cycles.
    They also present outstanding stability even under bending. In addition,  we analyze
    here the reaction mechanism using in situ X‐ray diffraction, X‐ray photoelectron
    spectroscopy, and computational tools and demonstrate that, in the aqueous system,
    Zn<jats:sup>2+</jats:sup> is not inserted into the cathode as previously assumed.
    In contrast, proton charge storage dominates the process. Overall, this work not
    only shows the great potential of LMCs as ZIBs cathode materials and the advantages
    of PPy coating, but also clarifies the charge/discharge mechanism in rechargeable
    ZIBs based on LMCs.
article_number: '2305128'
article_processing_charge: No
article_type: original
author:
- first_name: Guifang
  full_name: Zeng, Guifang
  last_name: Zeng
- first_name: Qing
  full_name: Sun, Qing
  last_name: Sun
- first_name: Sharona
  full_name: Horta, Sharona
  id: 03a7e858-01b1-11ec-8b71-99ae6c4a05bc
  last_name: Horta
- first_name: Shang
  full_name: Wang, Shang
  last_name: Wang
- first_name: Xuan
  full_name: Lu, Xuan
  last_name: Lu
- first_name: Chaoyue
  full_name: Zhang, Chaoyue
  last_name: Zhang
- first_name: Jing
  full_name: Li, Jing
  last_name: Li
- first_name: Junshan
  full_name: Li, Junshan
  last_name: Li
- first_name: Lijie
  full_name: Ci, Lijie
  last_name: Ci
- first_name: Yanhong
  full_name: Tian, Yanhong
  last_name: Tian
- first_name: Maria
  full_name: Ibáñez, Maria
  id: 43C61214-F248-11E8-B48F-1D18A9856A87
  last_name: Ibáñez
  orcid: 0000-0001-5013-2843
- first_name: Andreu
  full_name: Cabot, Andreu
  last_name: Cabot
citation:
  ama: 'Zeng G, Sun Q, Horta S, et al. A layered Bi2Te3@PPy cathode for aqueous zinc
    ion batteries: Mechanism and application in printed flexible batteries. <i>Advanced
    Materials</i>. doi:<a href="https://doi.org/10.1002/adma.202305128">10.1002/adma.202305128</a>'
  apa: 'Zeng, G., Sun, Q., Horta, S., Wang, S., Lu, X., Zhang, C., … Cabot, A. (n.d.).
    A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and application
    in printed flexible batteries. <i>Advanced Materials</i>. Wiley. <a href="https://doi.org/10.1002/adma.202305128">https://doi.org/10.1002/adma.202305128</a>'
  chicago: 'Zeng, Guifang, Qing Sun, Sharona Horta, Shang Wang, Xuan Lu, Chaoyue Zhang,
    Jing Li, et al. “A Layered Bi2Te3@PPy Cathode for Aqueous Zinc Ion Batteries:
    Mechanism and Application in Printed Flexible Batteries.” <i>Advanced Materials</i>.
    Wiley, n.d. <a href="https://doi.org/10.1002/adma.202305128">https://doi.org/10.1002/adma.202305128</a>.'
  ieee: 'G. Zeng <i>et al.</i>, “A layered Bi2Te3@PPy cathode for aqueous zinc ion
    batteries: Mechanism and application in printed flexible batteries,” <i>Advanced
    Materials</i>. Wiley.'
  ista: 'Zeng G, Sun Q, Horta S, Wang S, Lu X, Zhang C, Li J, Li J, Ci L, Tian Y,
    Ibáñez M, Cabot A. A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries:
    Mechanism and application in printed flexible batteries. Advanced Materials.,
    2305128.'
  mla: 'Zeng, Guifang, et al. “A Layered Bi2Te3@PPy Cathode for Aqueous Zinc Ion Batteries:
    Mechanism and Application in Printed Flexible Batteries.” <i>Advanced Materials</i>,
    2305128, Wiley, doi:<a href="https://doi.org/10.1002/adma.202305128">10.1002/adma.202305128</a>.'
  short: G. Zeng, Q. Sun, S. Horta, S. Wang, X. Lu, C. Zhang, J. Li, J. Li, L. Ci,
    Y. Tian, M. Ibáñez, A. Cabot, Advanced Materials (n.d.).
date_created: 2023-10-17T10:53:56Z
date_published: 2023-08-09T00:00:00Z
date_updated: 2023-12-13T13:03:53Z
day: '09'
department:
- _id: MaIb
doi: 10.1002/adma.202305128
external_id:
  isi:
  - '001085681000001'
  pmid:
  - '37555532'
isi: 1
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '08'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
  eissn:
  - 1521-4095
  issn:
  - 0935-9648
publication_status: accepted
publisher: Wiley
quality_controlled: '1'
status: public
title: 'A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and
  application in printed flexible batteries'
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
year: '2023'
...
---
_id: '11343'
abstract:
- lang: eng
  text: Multistable systems are characterized by exhibiting domain coexistence, where
    each domain accounts for the different equilibrium states. In case these systems
    are described by vectorial fields, domains can be connected through topological
    defects. Vortices are one of the most frequent and studied topological defect
    points. Optical vortices are equally relevant for their fundamental features as
    beams with topological features and their applications in image processing, telecommunications,
    optical tweezers, and quantum information. A natural source of optical vortices
    is the interaction of light beams with matter vortices in liquid crystal cells.
    The rhythms that govern the emergence of matter vortices due to fluctuations are
    not established. Here, we investigate the nucleation mechanisms of the matter
    vortices in liquid crystal cells and establish statistical laws that govern them.
    Based on a stochastic amplitude equation, the law for the number of nucleated
    vortices as a function of anisotropy, voltage, and noise level intensity is set.
    Experimental observations in a nematic liquid crystal cell with homeotropic anchoring
    and a negative anisotropic dielectric constant under the influence of a transversal
    electric field show a qualitative agreement with the theoretical findings.
acknowledgement: "The authors thank Enrique Calisto,Michal Kowalczyk, and Michel Ferre
  for fructified discussions. This work was funded by ANID—Millennium Science Initiative
  Program—ICN17_012. MGC is thankful for financial support from the Fondecyt 1210353
  project.\r\nOpen access funding provided by Institute of Science and Technology
  (IST Austria)."
article_processing_charge: Yes (via OA deal)
article_type: original
author:
- first_name: Esteban
  full_name: Aguilera, Esteban
  last_name: Aguilera
- first_name: Marcel G.
  full_name: Clerc, Marcel G.
  last_name: Clerc
- first_name: Valeska
  full_name: Zambra, Valeska
  id: 467ed36b-dc96-11ea-b7c8-b043a380b282
  last_name: Zambra
citation:
  ama: Aguilera E, Clerc MG, Zambra V. Vortices nucleation by inherent fluctuations
    in nematic liquid crystal cells. <i>Nonlinear Dynamics</i>. 2022;108:3209-3218.
    doi:<a href="https://doi.org/10.1007/s11071-022-07396-5">10.1007/s11071-022-07396-5</a>
  apa: Aguilera, E., Clerc, M. G., &#38; Zambra, V. (2022). Vortices nucleation by
    inherent fluctuations in nematic liquid crystal cells. <i>Nonlinear Dynamics</i>.
    Springer Nature. <a href="https://doi.org/10.1007/s11071-022-07396-5">https://doi.org/10.1007/s11071-022-07396-5</a>
  chicago: Aguilera, Esteban, Marcel G. Clerc, and Valeska Zambra. “Vortices Nucleation
    by Inherent Fluctuations in Nematic Liquid Crystal Cells.” <i>Nonlinear Dynamics</i>.
    Springer Nature, 2022. <a href="https://doi.org/10.1007/s11071-022-07396-5">https://doi.org/10.1007/s11071-022-07396-5</a>.
  ieee: E. Aguilera, M. G. Clerc, and V. Zambra, “Vortices nucleation by inherent
    fluctuations in nematic liquid crystal cells,” <i>Nonlinear Dynamics</i>, vol.
    108. Springer Nature, pp. 3209–3218, 2022.
  ista: Aguilera E, Clerc MG, Zambra V. 2022. Vortices nucleation by inherent fluctuations
    in nematic liquid crystal cells. Nonlinear Dynamics. 108, 3209–3218.
  mla: Aguilera, Esteban, et al. “Vortices Nucleation by Inherent Fluctuations in
    Nematic Liquid Crystal Cells.” <i>Nonlinear Dynamics</i>, vol. 108, Springer Nature,
    2022, pp. 3209–18, doi:<a href="https://doi.org/10.1007/s11071-022-07396-5">10.1007/s11071-022-07396-5</a>.
  short: E. Aguilera, M.G. Clerc, V. Zambra, Nonlinear Dynamics 108 (2022) 3209–3218.
date_created: 2022-05-02T07:01:59Z
date_published: 2022-06-01T00:00:00Z
date_updated: 2023-08-03T06:46:54Z
day: '01'
ddc:
- '530'
department:
- _id: KiMo
doi: 10.1007/s11071-022-07396-5
external_id:
  isi:
  - '000784871800001'
file:
- access_level: open_access
  checksum: 7d80cdece4e1b1c2106e6772a9622f60
  content_type: application/pdf
  creator: dernst
  date_created: 2022-08-05T06:13:19Z
  date_updated: 2022-08-05T06:13:19Z
  file_id: '11728'
  file_name: 2022_NonlinearDyn_Aguilera.pdf
  file_size: 1416049
  relation: main_file
  success: 1
file_date_updated: 2022-08-05T06:13:19Z
has_accepted_license: '1'
intvolume: '       108'
isi: 1
keyword:
- Electrical and Electronic Engineering
- Applied Mathematics
- Mechanical Engineering
- Ocean Engineering
- Aerospace Engineering
- Control and Systems Engineering
language:
- iso: eng
month: '06'
oa: 1
oa_version: Published Version
page: 3209-3218
publication: Nonlinear Dynamics
publication_identifier:
  eissn:
  - 1573-269X
  issn:
  - 0924-090X
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
scopus_import: '1'
status: public
title: Vortices nucleation by inherent fluctuations in nematic liquid crystal cells
tmp:
  image: /images/cc_by.png
  legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
  name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
  short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 108
year: '2022'
...
---
_id: '13355'
abstract:
- lang: eng
  text: 'Supramolecular self-assembly in biological systems holds promise to convert
    and amplify disease-specific signals to physical or mechanical signals that can
    direct cell fate. However, it remains challenging to design physiologically stable
    self-assembling systems that demonstrate tunable and predictable behavior. Here,
    the use of zwitterionic tetrapeptide modalities to direct nanoparticle assembly
    under physiological conditions is reported. The self-assembly of gold nanoparticles
    can be activated by enzymatic unveiling of surface-bound zwitterionic tetrapeptides
    through matrix metalloprotease-9 (MMP-9), which is overexpressed by cancer cells.
    This robust nanoparticle assembly is achieved by multivalent, self-complementary
    interactions of the zwitterionic tetrapeptides. In cancer cells that overexpress
    MMP-9, the nanoparticle assembly process occurs near the cell membrane and causes
    size-induced selection of cellular uptake mechanism, resulting in diminished cell
    growth. The enzyme responsiveness, and therefore, indirectly, the uptake route
    of the system can be programmed by customizing the peptide sequence: a simple
    inversion of the two amino acids at the cleavage site completely inactivates the
    enzyme responsiveness, self-assembly, and consequently changes the endocytic pathway.
    This robust self-complementary, zwitterionic peptide design demonstrates the use
    of enzyme-activated electrostatic side-chain patterns as powerful and customizable
    peptide modalities to program nanoparticle self-assembly and alter cellular response
    in biological context.'
article_number: '2104962'
article_processing_charge: No
article_type: original
author:
- first_name: Richard H.
  full_name: Huang, Richard H.
  last_name: Huang
- first_name: Nazia
  full_name: Nayeem, Nazia
  last_name: Nayeem
- first_name: Ye
  full_name: He, Ye
  last_name: He
- first_name: Jorge
  full_name: Morales, Jorge
  last_name: Morales
- first_name: Duncan
  full_name: Graham, Duncan
  last_name: Graham
- first_name: Rafal
  full_name: Klajn, Rafal
  id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
  last_name: Klajn
- first_name: Maria
  full_name: Contel, Maria
  last_name: Contel
- first_name: Stephen
  full_name: O'Brien, Stephen
  last_name: O'Brien
- first_name: Rein V.
  full_name: Ulijn, Rein V.
  last_name: Ulijn
citation:
  ama: Huang RH, Nayeem N, He Y, et al. Self‐complementary zwitterionic peptides direct
    nanoparticle assembly and enable enzymatic selection of endocytic pathways. <i>Advanced
    Materials</i>. 2022;34(1). doi:<a href="https://doi.org/10.1002/adma.202104962">10.1002/adma.202104962</a>
  apa: Huang, R. H., Nayeem, N., He, Y., Morales, J., Graham, D., Klajn, R., … Ulijn,
    R. V. (2022). Self‐complementary zwitterionic peptides direct nanoparticle assembly
    and enable enzymatic selection of endocytic pathways. <i>Advanced Materials</i>.
    Wiley. <a href="https://doi.org/10.1002/adma.202104962">https://doi.org/10.1002/adma.202104962</a>
  chicago: Huang, Richard H., Nazia Nayeem, Ye He, Jorge Morales, Duncan Graham, Rafal
    Klajn, Maria Contel, Stephen O’Brien, and Rein V. Ulijn. “Self‐complementary Zwitterionic
    Peptides Direct Nanoparticle Assembly and Enable Enzymatic Selection of Endocytic
    Pathways.” <i>Advanced Materials</i>. Wiley, 2022. <a href="https://doi.org/10.1002/adma.202104962">https://doi.org/10.1002/adma.202104962</a>.
  ieee: R. H. Huang <i>et al.</i>, “Self‐complementary zwitterionic peptides direct
    nanoparticle assembly and enable enzymatic selection of endocytic pathways,” <i>Advanced
    Materials</i>, vol. 34, no. 1. Wiley, 2022.
  ista: Huang RH, Nayeem N, He Y, Morales J, Graham D, Klajn R, Contel M, O’Brien
    S, Ulijn RV. 2022. Self‐complementary zwitterionic peptides direct nanoparticle
    assembly and enable enzymatic selection of endocytic pathways. Advanced Materials.
    34(1), 2104962.
  mla: Huang, Richard H., et al. “Self‐complementary Zwitterionic Peptides Direct
    Nanoparticle Assembly and Enable Enzymatic Selection of Endocytic Pathways.” <i>Advanced
    Materials</i>, vol. 34, no. 1, 2104962, Wiley, 2022, doi:<a href="https://doi.org/10.1002/adma.202104962">10.1002/adma.202104962</a>.
  short: R.H. Huang, N. Nayeem, Y. He, J. Morales, D. Graham, R. Klajn, M. Contel,
    S. O’Brien, R.V. Ulijn, Advanced Materials 34 (2022).
date_created: 2023-08-01T09:33:26Z
date_published: 2022-01-06T00:00:00Z
date_updated: 2023-08-07T09:58:17Z
day: '06'
doi: 10.1002/adma.202104962
extern: '1'
external_id:
  pmid:
  - '34668253'
intvolume: '        34'
issue: '1'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.1002/adma.202104962
month: '01'
oa: 1
oa_version: Published Version
pmid: 1
publication: Advanced Materials
publication_identifier:
  eissn:
  - 1521-4095
  issn:
  - 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Self‐complementary zwitterionic peptides direct nanoparticle assembly and enable
  enzymatic selection of endocytic pathways
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 34
year: '2022'
...
---
_id: '12137'
abstract:
- lang: eng
  text: We investigate the local self-sustained process underlying spiral turbulence
    in counter-rotating Taylor–Couette flow using a periodic annular domain, shaped
    as a parallelogram, two of whose sides are aligned with the cylindrical helix
    described by the spiral pattern. The primary focus of the study is placed on the
    emergence of drifting–rotating waves (DRW) that capture, in a relatively small
    domain, the main features of coherent structures typically observed in developed
    turbulence. The transitional dynamics of the subcritical region, far below the
    first instability of the laminar circular Couette flow, is determined by the upper
    and lower branches of DRW solutions originated at saddle-node bifurcations. The
    mechanism whereby these solutions self-sustain, and the chaotic dynamics they
    induce, are conspicuously reminiscent of other subcritical shear flows. Remarkably,
    the flow properties of DRW persist even as the Reynolds number is increased beyond
    the linear stability threshold of the base flow. Simulations in a narrow parallelogram
    domain stretched in the azimuthal direction to revolve around the apparatus a
    full turn confirm that self-sustained vortices eventually concentrate into a localised
    pattern. The resulting statistical steady state satisfactorily reproduces qualitatively,
    and to a certain degree also quantitatively, the topology and properties of spiral
    turbulence as calculated in a large periodic domain of sufficient aspect ratio
    that is representative of the real system.
acknowledgement: "K.D.’s research was supported by an Australian Research Council
  Discovery Early Career\r\nResearcher Award (DE170100171). B.W., R.A., F.M. and A.M.
  research was supported by the Spanish Ministerio de Economía y Competitivdad (grant
  numbers FIS2016-77849-R and FIS2017-85794-P) and Ministerio de Ciencia e Innovación
  (grant number PID2020-114043GB-I00) and the Generalitat de Catalunya (grant 2017-SGR-785).
  B.W.’s research was also supported by the Chinese Scholarship Council (grant CSC
  no. 201806440152)."
article_number: A21
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: B.
  full_name: Wang, B.
  last_name: Wang
- first_name: Roger
  full_name: Ayats López, Roger
  id: ab77522d-073b-11ed-8aff-e71b39258362
  last_name: Ayats López
  orcid: 0000-0001-6572-0621
- first_name: K.
  full_name: Deguchi, K.
  last_name: Deguchi
- first_name: F.
  full_name: Mellibovsky, F.
  last_name: Mellibovsky
- first_name: A.
  full_name: Meseguer, A.
  last_name: Meseguer
citation:
  ama: Wang B, Ayats López R, Deguchi K, Mellibovsky F, Meseguer A. Self-sustainment
    of coherent structures in counter-rotating Taylor–Couette flow. <i>Journal of
    Fluid Mechanics</i>. 2022;951. doi:<a href="https://doi.org/10.1017/jfm.2022.828">10.1017/jfm.2022.828</a>
  apa: Wang, B., Ayats López, R., Deguchi, K., Mellibovsky, F., &#38; Meseguer, A.
    (2022). Self-sustainment of coherent structures in counter-rotating Taylor–Couette
    flow. <i>Journal of Fluid Mechanics</i>. Cambridge University Press. <a href="https://doi.org/10.1017/jfm.2022.828">https://doi.org/10.1017/jfm.2022.828</a>
  chicago: Wang, B., Roger Ayats López, K. Deguchi, F. Mellibovsky, and A. Meseguer.
    “Self-Sustainment of Coherent Structures in Counter-Rotating Taylor–Couette Flow.”
    <i>Journal of Fluid Mechanics</i>. Cambridge University Press, 2022. <a href="https://doi.org/10.1017/jfm.2022.828">https://doi.org/10.1017/jfm.2022.828</a>.
  ieee: B. Wang, R. Ayats López, K. Deguchi, F. Mellibovsky, and A. Meseguer, “Self-sustainment
    of coherent structures in counter-rotating Taylor–Couette flow,” <i>Journal of
    Fluid Mechanics</i>, vol. 951. Cambridge University Press, 2022.
  ista: Wang B, Ayats López R, Deguchi K, Mellibovsky F, Meseguer A. 2022. Self-sustainment
    of coherent structures in counter-rotating Taylor–Couette flow. Journal of Fluid
    Mechanics. 951, A21.
  mla: Wang, B., et al. “Self-Sustainment of Coherent Structures in Counter-Rotating
    Taylor–Couette Flow.” <i>Journal of Fluid Mechanics</i>, vol. 951, A21, Cambridge
    University Press, 2022, doi:<a href="https://doi.org/10.1017/jfm.2022.828">10.1017/jfm.2022.828</a>.
  short: B. Wang, R. Ayats López, K. Deguchi, F. Mellibovsky, A. Meseguer, Journal
    of Fluid Mechanics 951 (2022).
date_created: 2023-01-12T12:04:17Z
date_published: 2022-11-07T00:00:00Z
date_updated: 2023-08-04T08:54:16Z
day: '07'
department:
- _id: BjHo
doi: 10.1017/jfm.2022.828
external_id:
  arxiv:
  - '2207.12990'
  isi:
  - '000879446900001'
intvolume: '       951'
isi: 1
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- Applied Mathematics
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: ' https://doi.org/10.48550/arXiv.2207.12990'
month: '11'
oa: 1
oa_version: Preprint
publication: Journal of Fluid Mechanics
publication_identifier:
  eissn:
  - 1469-7645
  issn:
  - 0022-1120
publication_status: published
publisher: Cambridge University Press
quality_controlled: '1'
scopus_import: '1'
status: public
title: Self-sustainment of coherent structures in counter-rotating Taylor–Couette
  flow
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 951
year: '2022'
...
---
_id: '12145'
abstract:
- lang: eng
  text: In the class of strictly convex smooth boundaries each of which has no strip
    around its boundary foliated by invariant curves, we prove that the Taylor coefficients
    of the “normalized” Mather’s β-function are invariant under C∞-conjugacies. In
    contrast, we prove that any two elliptic billiard maps are C0-conjugate near their
    respective boundaries, and C∞-conjugate, near the boundary and away from a line
    passing through the center of the underlying ellipse. We also prove that, if the
    billiard maps corresponding to two ellipses are topologically conjugate, then
    the two ellipses are similar.
acknowledgement: "We are grateful to the anonymous referees for their careful reading
  and valuable remarks and\r\ncomments which helped to improve the paper significantly.
  We gratefully acknowledge support from the European Research Council (ERC) through
  the Advanced Grant “SPERIG” (#885707)."
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Edmond
  full_name: Koudjinan, Edmond
  id: 52DF3E68-AEFA-11EA-95A4-124A3DDC885E
  last_name: Koudjinan
  orcid: 0000-0003-2640-4049
- first_name: Vadim
  full_name: Kaloshin, Vadim
  id: FE553552-CDE8-11E9-B324-C0EBE5697425
  last_name: Kaloshin
  orcid: 0000-0002-6051-2628
citation:
  ama: Koudjinan E, Kaloshin V. On some invariants of Birkhoff billiards under conjugacy.
    <i>Regular and Chaotic Dynamics</i>. 2022;27(6):525-537. doi:<a href="https://doi.org/10.1134/S1560354722050021">10.1134/S1560354722050021</a>
  apa: Koudjinan, E., &#38; Kaloshin, V. (2022). On some invariants of Birkhoff billiards
    under conjugacy. <i>Regular and Chaotic Dynamics</i>. Springer Nature. <a href="https://doi.org/10.1134/S1560354722050021">https://doi.org/10.1134/S1560354722050021</a>
  chicago: Koudjinan, Edmond, and Vadim Kaloshin. “On Some Invariants of Birkhoff
    Billiards under Conjugacy.” <i>Regular and Chaotic Dynamics</i>. Springer Nature,
    2022. <a href="https://doi.org/10.1134/S1560354722050021">https://doi.org/10.1134/S1560354722050021</a>.
  ieee: E. Koudjinan and V. Kaloshin, “On some invariants of Birkhoff billiards under
    conjugacy,” <i>Regular and Chaotic Dynamics</i>, vol. 27, no. 6. Springer Nature,
    pp. 525–537, 2022.
  ista: Koudjinan E, Kaloshin V. 2022. On some invariants of Birkhoff billiards under
    conjugacy. Regular and Chaotic Dynamics. 27(6), 525–537.
  mla: Koudjinan, Edmond, and Vadim Kaloshin. “On Some Invariants of Birkhoff Billiards
    under Conjugacy.” <i>Regular and Chaotic Dynamics</i>, vol. 27, no. 6, Springer
    Nature, 2022, pp. 525–37, doi:<a href="https://doi.org/10.1134/S1560354722050021">10.1134/S1560354722050021</a>.
  short: E. Koudjinan, V. Kaloshin, Regular and Chaotic Dynamics 27 (2022) 525–537.
date_created: 2023-01-12T12:06:49Z
date_published: 2022-10-03T00:00:00Z
date_updated: 2023-08-04T08:59:14Z
day: '03'
department:
- _id: VaKa
doi: 10.1134/S1560354722050021
ec_funded: 1
external_id:
  arxiv:
  - '2105.14640'
  isi:
  - '000865267300002'
intvolume: '        27'
isi: 1
issue: '6'
keyword:
- Mechanical Engineering
- Applied Mathematics
- Mathematical Physics
- Modeling and Simulation
- Statistical and Nonlinear Physics
- Mathematics (miscellaneous)
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.48550/arXiv.2105.14640
month: '10'
oa: 1
oa_version: Preprint
page: 525-537
project:
- _id: 9B8B92DE-BA93-11EA-9121-9846C619BF3A
  call_identifier: H2020
  grant_number: '885707'
  name: Spectral rigidity and integrability for billiards and geodesic flows
publication: Regular and Chaotic Dynamics
publication_identifier:
  eissn:
  - 1468-4845
  issn:
  - 1560-3547
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
related_material:
  link:
  - relation: erratum
    url: https://doi.org/10.1134/s1560354722060107
scopus_import: '1'
status: public
title: On some invariants of Birkhoff billiards under conjugacy
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 27
year: '2022'
...
---
_id: '12146'
abstract:
- lang: eng
  text: 'In this paper, we explore the stability and dynamical relevance of a wide
    variety of steady, time-periodic, quasiperiodic, and chaotic flows arising between
    orthogonally stretching parallel plates. We first explore the stability of all
    the steady flow solution families formerly identified by Ayats et al. [“Flows
    between orthogonally stretching parallel plates,” Phys. Fluids 33, 024103 (2021)],
    concluding that only the one that originates from the Stokesian approximation
    is actually stable. When both plates are shrinking at identical or nearly the
    same deceleration rates, this Stokesian flow exhibits a Hopf bifurcation that
    leads to stable time-periodic regimes. The resulting time-periodic orbits or flows
    are tracked for different Reynolds numbers and stretching rates while monitoring
    their Floquet exponents to identify secondary instabilities. It is found that
    these time-periodic flows also exhibit Neimark–Sacker bifurcations, generating
    stable quasiperiodic flows (tori) that may sometimes give rise to chaotic dynamics
    through a Ruelle–Takens–Newhouse scenario. However, chaotic dynamics is unusually
    observed, as the quasiperiodic flows generally become phase-locked through a resonance
    mechanism before a strange attractor may arise, thus restoring the time-periodicity
    of the flow. In this work, we have identified and tracked four different resonance
    regions, also known as Arnold tongues or horns. In particular, the 1 : 4 strong
    resonance region is explored in great detail, where the identified scenarios are
    in very good agreement with normal form theory. '
acknowledgement: "This work was supported by the Spanish MINECO under Grant Nos. FIS2017-85794-P
  and PRX18/00179, the Spanish MICINN through Grant No. PID2020-114043GB-I00, and
  the\r\nGeneralitat de Catalunya under Grant No. 2017-SGR-785. B.W.’s research was
  also supported by the Chinese Scholarship Council through Grant CSC No. 201806440152."
article_number: '114111'
article_processing_charge: No
article_type: original
author:
- first_name: B.
  full_name: Wang, B.
  last_name: Wang
- first_name: Roger
  full_name: Ayats López, Roger
  id: ab77522d-073b-11ed-8aff-e71b39258362
  last_name: Ayats López
  orcid: 0000-0001-6572-0621
- first_name: A.
  full_name: Meseguer, A.
  last_name: Meseguer
- first_name: F.
  full_name: Marques, F.
  last_name: Marques
citation:
  ama: Wang B, Ayats López R, Meseguer A, Marques F. Phase-locking flows between orthogonally
    stretching parallel plates. <i>Physics of Fluids</i>. 2022;34(11). doi:<a href="https://doi.org/10.1063/5.0124152">10.1063/5.0124152</a>
  apa: Wang, B., Ayats López, R., Meseguer, A., &#38; Marques, F. (2022). Phase-locking
    flows between orthogonally stretching parallel plates. <i>Physics of Fluids</i>.
    AIP Publishing. <a href="https://doi.org/10.1063/5.0124152">https://doi.org/10.1063/5.0124152</a>
  chicago: Wang, B., Roger Ayats López, A. Meseguer, and F. Marques. “Phase-Locking
    Flows between Orthogonally Stretching Parallel Plates.” <i>Physics of Fluids</i>.
    AIP Publishing, 2022. <a href="https://doi.org/10.1063/5.0124152">https://doi.org/10.1063/5.0124152</a>.
  ieee: B. Wang, R. Ayats López, A. Meseguer, and F. Marques, “Phase-locking flows
    between orthogonally stretching parallel plates,” <i>Physics of Fluids</i>, vol.
    34, no. 11. AIP Publishing, 2022.
  ista: Wang B, Ayats López R, Meseguer A, Marques F. 2022. Phase-locking flows between
    orthogonally stretching parallel plates. Physics of Fluids. 34(11), 114111.
  mla: Wang, B., et al. “Phase-Locking Flows between Orthogonally Stretching Parallel
    Plates.” <i>Physics of Fluids</i>, vol. 34, no. 11, 114111, AIP Publishing, 2022,
    doi:<a href="https://doi.org/10.1063/5.0124152">10.1063/5.0124152</a>.
  short: B. Wang, R. Ayats López, A. Meseguer, F. Marques, Physics of Fluids 34 (2022).
date_created: 2023-01-12T12:06:58Z
date_published: 2022-11-04T00:00:00Z
date_updated: 2023-10-03T11:07:58Z
day: '04'
department:
- _id: BjHo
doi: 10.1063/5.0124152
external_id:
  isi:
  - '000880665300024'
intvolume: '        34'
isi: 1
issue: '11'
keyword:
- Condensed Matter Physics
- Fluid Flow and Transfer Processes
- Mechanics of Materials
- Computational Mechanics
- Mechanical Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://upcommons.upc.edu/handle/2117/385635
month: '11'
oa: 1
oa_version: Submitted Version
publication: Physics of Fluids
publication_identifier:
  eissn:
  - 1089-7666
  issn:
  - 1070-6631
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
scopus_import: '1'
status: public
title: Phase-locking flows between orthogonally stretching parallel plates
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 34
year: '2022'
...
---
_id: '13996'
abstract:
- lang: eng
  text: We report the observation of an anomalous nonlinear optical response of the
    prototypical three-dimensional topological insulator bismuth selenide through
    the process of high-order harmonic generation. We find that the generation efficiency
    increases as the laser polarization is changed from linear to elliptical, and
    it becomes maximum for circular polarization. With the aid of a microscopic theory
    and a detailed analysis of the measured spectra, we reveal that such anomalous
    enhancement encodes the characteristic topology of the band structure that originates
    from the interplay of strong spin–orbit coupling and time-reversal symmetry protection.
    The implications are in ultrafast probing of topological phase transitions, light-field
    driven dissipationless electronics, and quantum computation.
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Denitsa Rangelova
  full_name: Baykusheva, Denitsa Rangelova
  id: 71b4d059-2a03-11ee-914d-dfa3beed6530
  last_name: Baykusheva
- first_name: Alexis
  full_name: Chacón, Alexis
  last_name: Chacón
- first_name: Jian
  full_name: Lu, Jian
  last_name: Lu
- first_name: Trevor P.
  full_name: Bailey, Trevor P.
  last_name: Bailey
- first_name: Jonathan A.
  full_name: Sobota, Jonathan A.
  last_name: Sobota
- first_name: Hadas
  full_name: Soifer, Hadas
  last_name: Soifer
- first_name: Patrick S.
  full_name: Kirchmann, Patrick S.
  last_name: Kirchmann
- first_name: Costel
  full_name: Rotundu, Costel
  last_name: Rotundu
- first_name: Ctirad
  full_name: Uher, Ctirad
  last_name: Uher
- first_name: Tony F.
  full_name: Heinz, Tony F.
  last_name: Heinz
- first_name: David A.
  full_name: Reis, David A.
  last_name: Reis
- first_name: Shambhu
  full_name: Ghimire, Shambhu
  last_name: Ghimire
citation:
  ama: Baykusheva DR, Chacón A, Lu J, et al. All-optical probe of three-dimensional
    topological insulators based on high-harmonic generation by circularly polarized
    laser fields. <i>Nano Letters</i>. 2021;21(21):8970-8978. doi:<a href="https://doi.org/10.1021/acs.nanolett.1c02145">10.1021/acs.nanolett.1c02145</a>
  apa: Baykusheva, D. R., Chacón, A., Lu, J., Bailey, T. P., Sobota, J. A., Soifer,
    H., … Ghimire, S. (2021). All-optical probe of three-dimensional topological insulators
    based on high-harmonic generation by circularly polarized laser fields. <i>Nano
    Letters</i>. American Chemical Society. <a href="https://doi.org/10.1021/acs.nanolett.1c02145">https://doi.org/10.1021/acs.nanolett.1c02145</a>
  chicago: Baykusheva, Denitsa Rangelova, Alexis Chacón, Jian Lu, Trevor P. Bailey,
    Jonathan A. Sobota, Hadas Soifer, Patrick S. Kirchmann, et al. “All-Optical Probe
    of Three-Dimensional Topological Insulators Based on High-Harmonic Generation
    by Circularly Polarized Laser Fields.” <i>Nano Letters</i>. American Chemical
    Society, 2021. <a href="https://doi.org/10.1021/acs.nanolett.1c02145">https://doi.org/10.1021/acs.nanolett.1c02145</a>.
  ieee: D. R. Baykusheva <i>et al.</i>, “All-optical probe of three-dimensional topological
    insulators based on high-harmonic generation by circularly polarized laser fields,”
    <i>Nano Letters</i>, vol. 21, no. 21. American Chemical Society, pp. 8970–8978,
    2021.
  ista: Baykusheva DR, Chacón A, Lu J, Bailey TP, Sobota JA, Soifer H, Kirchmann PS,
    Rotundu C, Uher C, Heinz TF, Reis DA, Ghimire S. 2021. All-optical probe of three-dimensional
    topological insulators based on high-harmonic generation by circularly polarized
    laser fields. Nano Letters. 21(21), 8970–8978.
  mla: Baykusheva, Denitsa Rangelova, et al. “All-Optical Probe of Three-Dimensional
    Topological Insulators Based on High-Harmonic Generation by Circularly Polarized
    Laser Fields.” <i>Nano Letters</i>, vol. 21, no. 21, American Chemical Society,
    2021, pp. 8970–78, doi:<a href="https://doi.org/10.1021/acs.nanolett.1c02145">10.1021/acs.nanolett.1c02145</a>.
  short: D.R. Baykusheva, A. Chacón, J. Lu, T.P. Bailey, J.A. Sobota, H. Soifer, P.S.
    Kirchmann, C. Rotundu, C. Uher, T.F. Heinz, D.A. Reis, S. Ghimire, Nano Letters
    21 (2021) 8970–8978.
date_created: 2023-08-09T13:09:15Z
date_published: 2021-10-22T00:00:00Z
date_updated: 2023-08-22T07:32:00Z
day: '22'
doi: 10.1021/acs.nanolett.1c02145
extern: '1'
external_id:
  arxiv:
  - '2109.15291'
  pmid:
  - '34676752'
intvolume: '        21'
issue: '21'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.1021/acs.nanolett.1c02145
month: '10'
oa: 1
oa_version: Published Version
page: 8970-8978
pmid: 1
publication: Nano Letters
publication_identifier:
  eissn:
  - 1530-6992
  issn:
  - 1530-6984
publication_status: published
publisher: American Chemical Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: All-optical probe of three-dimensional topological insulators based on high-harmonic
  generation by circularly polarized laser fields
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 21
year: '2021'
...
---
_id: '9282'
abstract:
- lang: eng
  text: Several Ising-type magnetic van der Waals (vdW) materials exhibit stable magnetic
    ground states. Despite these clear experimental demonstrations, a complete theoretical
    and microscopic understanding of their magnetic anisotropy is still lacking. In
    particular, the validity limit of identifying their one-dimensional (1-D) Ising
    nature has remained uninvestigated in a quantitative way. Here we performed the
    complete mapping of magnetic anisotropy for a prototypical Ising vdW magnet FePS3
    for the first time. Combining torque magnetometry measurements with their magnetostatic
    model analysis and the relativistic density functional total energy calculations,
    we successfully constructed the three-dimensional (3-D) mappings of the magnetic
    anisotropy in terms of magnetic torque and energy. The results not only quantitatively
    confirm that the easy axis is perpendicular to the ab plane, but also reveal the
    anisotropies within the ab, ac, and bc planes. Our approach can be applied to
    the detailed quantitative study of magnetism in vdW materials.
article_number: '035011'
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Muhammad
  full_name: Nauman, Muhammad
  id: 32c21954-2022-11eb-9d5f-af9f93c24e71
  last_name: Nauman
  orcid: 0000-0002-2111-4846
- first_name: Do Hoon
  full_name: Kiem, Do Hoon
  last_name: Kiem
- first_name: Sungmin
  full_name: Lee, Sungmin
  last_name: Lee
- first_name: Suhan
  full_name: Son, Suhan
  last_name: Son
- first_name: J-G
  full_name: Park, J-G
  last_name: Park
- first_name: Woun
  full_name: Kang, Woun
  last_name: Kang
- first_name: Myung Joon
  full_name: Han, Myung Joon
  last_name: Han
- first_name: Youn Jung
  full_name: Jo, Youn Jung
  last_name: Jo
citation:
  ama: Nauman M, Kiem DH, Lee S, et al. Complete mapping of magnetic anisotropy for
    prototype Ising van der Waals FePS3. <i>2D Materials</i>. 2021;8(3). doi:<a href="https://doi.org/10.1088/2053-1583/abeed3">10.1088/2053-1583/abeed3</a>
  apa: Nauman, M., Kiem, D. H., Lee, S., Son, S., Park, J.-G., Kang, W., … Jo, Y.
    J. (2021). Complete mapping of magnetic anisotropy for prototype Ising van der
    Waals FePS3. <i>2D Materials</i>. IOP Publishing. <a href="https://doi.org/10.1088/2053-1583/abeed3">https://doi.org/10.1088/2053-1583/abeed3</a>
  chicago: Nauman, Muhammad, Do Hoon Kiem, Sungmin Lee, Suhan Son, J-G Park, Woun
    Kang, Myung Joon Han, and Youn Jung Jo. “Complete Mapping of Magnetic Anisotropy
    for Prototype Ising van Der Waals FePS3.” <i>2D Materials</i>. IOP Publishing,
    2021. <a href="https://doi.org/10.1088/2053-1583/abeed3">https://doi.org/10.1088/2053-1583/abeed3</a>.
  ieee: M. Nauman <i>et al.</i>, “Complete mapping of magnetic anisotropy for prototype
    Ising van der Waals FePS3,” <i>2D Materials</i>, vol. 8, no. 3. IOP Publishing,
    2021.
  ista: Nauman M, Kiem DH, Lee S, Son S, Park J-G, Kang W, Han MJ, Jo YJ. 2021. Complete
    mapping of magnetic anisotropy for prototype Ising van der Waals FePS3. 2D Materials.
    8(3), 035011.
  mla: Nauman, Muhammad, et al. “Complete Mapping of Magnetic Anisotropy for Prototype
    Ising van Der Waals FePS3.” <i>2D Materials</i>, vol. 8, no. 3, 035011, IOP Publishing,
    2021, doi:<a href="https://doi.org/10.1088/2053-1583/abeed3">10.1088/2053-1583/abeed3</a>.
  short: M. Nauman, D.H. Kiem, S. Lee, S. Son, J.-G. Park, W. Kang, M.J. Han, Y.J.
    Jo, 2D Materials 8 (2021).
date_created: 2021-03-23T07:10:17Z
date_published: 2021-04-06T00:00:00Z
date_updated: 2021-12-01T10:36:56Z
day: '06'
department:
- _id: KiMo
doi: 10.1088/2053-1583/abeed3
extern: '1'
external_id:
  arxiv:
  - '2103.09029'
intvolume: '         8'
issue: '3'
keyword:
- Mechanical Engineering
- General Materials Science
- Mechanics of Materials
- General Chemistry
- Condensed Matter Physics
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://arxiv.org/abs/2103.09029
month: '04'
oa: 1
oa_version: Preprint
publication: 2D Materials
publication_identifier:
  issn:
  - 2053-1583
publication_status: published
publisher: IOP Publishing
quality_controlled: '1'
status: public
title: Complete mapping of magnetic anisotropy for prototype Ising van der Waals FePS3
type: journal_article
user_id: 8b945eb4-e2f2-11eb-945a-df72226e66a9
volume: 8
year: '2021'
...
---
_id: '10123'
abstract:
- lang: eng
  text: Solution synthesis of particles emerged as an alternative to prepare thermoelectric
    materials with less demanding processing conditions than conventional solid-state
    synthetic methods. However, solution synthesis generally involves the presence
    of additional molecules or ions belonging to the precursors or added to enable
    solubility and/or regulate nucleation and growth. These molecules or ions can
    end up in the particles as surface adsorbates and interfere in the material properties.
    This work demonstrates that ionic adsorbates, in particular Na⁺ ions, are electrostatically
    adsorbed in SnSe particles synthesized in water and play a crucial role not only
    in directing the material nano/microstructure but also in determining the transport
    properties of the consolidated material. In dense pellets prepared by sintering
    SnSe particles, Na remains within the crystal lattice as dopant, in dislocations,
    precipitates, and forming grain boundary complexions. These results highlight
    the importance of considering all the possible unintentional impurities to establish
    proper structure-property relationships and control material properties in solution-processed
    thermoelectric materials.
acknowledged_ssus:
- _id: EM-Fac
- _id: NanoFab
acknowledgement: 'Y.L. and M.C. contributed equally to this work. This research was
  supported by the Scientific Service Units (SSU) of IST Austria through resources
  provided by Electron Microscopy Facility (EMF) and the Nanofabrication Facility
  (NNF). This work was financially supported by IST Austria and the Werner Siemens
  Foundation. Y.L. acknowledges funding from the European Union''s Horizon 2020 research
  and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411.
  M.C. has received funding from the European Union''s Horizon 2020 research and innovation
  program under the Marie Skłodowska-Curie Grant Agreement No. 665385. Y.Y. and O.C.-M.
  acknowledge the financial support from DFG within the project SFB 917: Nanoswitches.
  J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program. C.C. acknowledges
  funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N.'
article_number: '2106858'
article_processing_charge: Yes (via OA deal)
article_type: original
author:
- first_name: Yu
  full_name: Liu, Yu
  id: 2A70014E-F248-11E8-B48F-1D18A9856A87
  last_name: Liu
  orcid: 0000-0001-7313-6740
- first_name: Mariano
  full_name: Calcabrini, Mariano
  id: 45D7531A-F248-11E8-B48F-1D18A9856A87
  last_name: Calcabrini
  orcid: 0000-0003-4566-5877
- first_name: Yuan
  full_name: Yu, Yuan
  last_name: Yu
- first_name: Aziz
  full_name: Genç, Aziz
  last_name: Genç
- first_name: Cheng
  full_name: Chang, Cheng
  id: 9E331C2E-9F27-11E9-AE48-5033E6697425
  last_name: Chang
  orcid: 0000-0002-9515-4277
- first_name: Tommaso
  full_name: Costanzo, Tommaso
  id: D93824F4-D9BA-11E9-BB12-F207E6697425
  last_name: Costanzo
  orcid: 0000-0001-9732-3815
- first_name: Tobias
  full_name: Kleinhanns, Tobias
  id: 8BD9DE16-AB3C-11E9-9C8C-2A03E6697425
  last_name: Kleinhanns
- first_name: Seungho
  full_name: Lee, Seungho
  id: BB243B88-D767-11E9-B658-BC13E6697425
  last_name: Lee
  orcid: 0000-0002-6962-8598
- first_name: Jordi
  full_name: Llorca, Jordi
  last_name: Llorca
- first_name: Oana
  full_name: Cojocaru‐Mirédin, Oana
  last_name: Cojocaru‐Mirédin
- first_name: Maria
  full_name: Ibáñez, Maria
  id: 43C61214-F248-11E8-B48F-1D18A9856A87
  last_name: Ibáñez
  orcid: 0000-0001-5013-2843
citation:
  ama: 'Liu Y, Calcabrini M, Yu Y, et al. The importance of surface adsorbates in
    solution‐processed thermoelectric materials: The case of SnSe. <i>Advanced Materials</i>.
    2021;33(52). doi:<a href="https://doi.org/10.1002/adma.202106858">10.1002/adma.202106858</a>'
  apa: 'Liu, Y., Calcabrini, M., Yu, Y., Genç, A., Chang, C., Costanzo, T., … Ibáñez,
    M. (2021). The importance of surface adsorbates in solution‐processed thermoelectric
    materials: The case of SnSe. <i>Advanced Materials</i>. Wiley. <a href="https://doi.org/10.1002/adma.202106858">https://doi.org/10.1002/adma.202106858</a>'
  chicago: 'Liu, Yu, Mariano Calcabrini, Yuan Yu, Aziz Genç, Cheng Chang, Tommaso
    Costanzo, Tobias Kleinhanns, et al. “The Importance of Surface Adsorbates in Solution‐processed
    Thermoelectric Materials: The Case of SnSe.” <i>Advanced Materials</i>. Wiley,
    2021. <a href="https://doi.org/10.1002/adma.202106858">https://doi.org/10.1002/adma.202106858</a>.'
  ieee: 'Y. Liu <i>et al.</i>, “The importance of surface adsorbates in solution‐processed
    thermoelectric materials: The case of SnSe,” <i>Advanced Materials</i>, vol. 33,
    no. 52. Wiley, 2021.'
  ista: 'Liu Y, Calcabrini M, Yu Y, Genç A, Chang C, Costanzo T, Kleinhanns T, Lee
    S, Llorca J, Cojocaru‐Mirédin O, Ibáñez M. 2021. The importance of surface adsorbates
    in solution‐processed thermoelectric materials: The case of SnSe. Advanced Materials.
    33(52), 2106858.'
  mla: 'Liu, Yu, et al. “The Importance of Surface Adsorbates in Solution‐processed
    Thermoelectric Materials: The Case of SnSe.” <i>Advanced Materials</i>, vol. 33,
    no. 52, 2106858, Wiley, 2021, doi:<a href="https://doi.org/10.1002/adma.202106858">10.1002/adma.202106858</a>.'
  short: Y. Liu, M. Calcabrini, Y. Yu, A. Genç, C. Chang, T. Costanzo, T. Kleinhanns,
    S. Lee, J. Llorca, O. Cojocaru‐Mirédin, M. Ibáñez, Advanced Materials 33 (2021).
date_created: 2021-10-11T20:07:24Z
date_published: 2021-12-29T00:00:00Z
date_updated: 2023-08-14T07:25:27Z
day: '29'
ddc:
- '620'
department:
- _id: EM-Fac
- _id: MaIb
doi: 10.1002/adma.202106858
ec_funded: 1
external_id:
  isi:
  - '000709899300001'
  pmid:
  - '34626034'
file:
- access_level: open_access
  checksum: 990bccc527c64d85cf1c97885110b5f4
  content_type: application/pdf
  creator: cchlebak
  date_created: 2022-02-03T13:16:14Z
  date_updated: 2022-02-03T13:16:14Z
  file_id: '10720'
  file_name: 2021_AdvancedMaterials_Liu.pdf
  file_size: 5595666
  relation: main_file
  success: 1
file_date_updated: 2022-02-03T13:16:14Z
has_accepted_license: '1'
intvolume: '        33'
isi: 1
issue: '52'
keyword:
- mechanical engineering
- mechanics of materials
- general materials science
language:
- iso: eng
month: '12'
oa: 1
oa_version: Published Version
pmid: 1
project:
- _id: 2564DBCA-B435-11E9-9278-68D0E5697425
  call_identifier: H2020
  grant_number: '665385'
  name: International IST Doctoral Program
- _id: 260C2330-B435-11E9-9278-68D0E5697425
  call_identifier: H2020
  grant_number: '754411'
  name: ISTplus - Postdoctoral Fellowships
- _id: 9B8804FC-BA93-11EA-9121-9846C619BF3A
  grant_number: M02889
  name: Bottom-up Engineering for Thermoelectric Applications
- _id: 9B8F7476-BA93-11EA-9121-9846C619BF3A
  name: 'HighTE: The Werner Siemens Laboratory for the High Throughput Discovery of
    Semiconductors for Waste Heat Recovery'
publication: Advanced Materials
publication_identifier:
  eissn:
  - 1521-4095
  issn:
  - 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
related_material:
  record:
  - id: '12885'
    relation: dissertation_contains
    status: public
scopus_import: '1'
status: public
title: 'The importance of surface adsorbates in solution‐processed thermoelectric
  materials: The case of SnSe'
tmp:
  image: /images/cc_by.png
  legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
  name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
  short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 33
year: '2021'
...
---
_id: '10549'
abstract:
- lang: eng
  text: We derive optimal-order homogenization rates for random nonlinear elliptic
    PDEs with monotone nonlinearity in the uniformly elliptic case. More precisely,
    for a random monotone operator on \mathbb {R}^d with stationary law (that is spatially
    homogeneous statistics) and fast decay of correlations on scales larger than the
    microscale \varepsilon >0, we establish homogenization error estimates of the
    order \varepsilon in case d\geqq 3, and of the order \varepsilon |\log \varepsilon
    |^{1/2} in case d=2. Previous results in nonlinear stochastic homogenization have
    been limited to a small algebraic rate of convergence \varepsilon ^\delta . We
    also establish error estimates for the approximation of the homogenized operator
    by the method of representative volumes of the order (L/\varepsilon )^{-d/2} for
    a representative volume of size L. Our results also hold in the case of systems
    for which a (small-scale) C^{1,\alpha } regularity theory is available.
acknowledgement: Open access funding provided by Institute of Science and Technology
  (IST Austria). SN acknowledges partial support by the Deutsche Forschungsgemeinschaft
  (DFG, German Research Foundation) – project number 405009441.
article_processing_charge: Yes (via OA deal)
article_type: original
arxiv: 1
author:
- first_name: Julian L
  full_name: Fischer, Julian L
  id: 2C12A0B0-F248-11E8-B48F-1D18A9856A87
  last_name: Fischer
  orcid: 0000-0002-0479-558X
- first_name: Stefan
  full_name: Neukamm, Stefan
  last_name: Neukamm
citation:
  ama: Fischer JL, Neukamm S. Optimal homogenization rates in stochastic homogenization
    of nonlinear uniformly elliptic equations and systems. <i>Archive for Rational
    Mechanics and Analysis</i>. 2021;242(1):343-452. doi:<a href="https://doi.org/10.1007/s00205-021-01686-9">10.1007/s00205-021-01686-9</a>
  apa: Fischer, J. L., &#38; Neukamm, S. (2021). Optimal homogenization rates in stochastic
    homogenization of nonlinear uniformly elliptic equations and systems. <i>Archive
    for Rational Mechanics and Analysis</i>. Springer Nature. <a href="https://doi.org/10.1007/s00205-021-01686-9">https://doi.org/10.1007/s00205-021-01686-9</a>
  chicago: Fischer, Julian L, and Stefan Neukamm. “Optimal Homogenization Rates in
    Stochastic Homogenization of Nonlinear Uniformly Elliptic Equations and Systems.”
    <i>Archive for Rational Mechanics and Analysis</i>. Springer Nature, 2021. <a
    href="https://doi.org/10.1007/s00205-021-01686-9">https://doi.org/10.1007/s00205-021-01686-9</a>.
  ieee: J. L. Fischer and S. Neukamm, “Optimal homogenization rates in stochastic
    homogenization of nonlinear uniformly elliptic equations and systems,” <i>Archive
    for Rational Mechanics and Analysis</i>, vol. 242, no. 1. Springer Nature, pp.
    343–452, 2021.
  ista: Fischer JL, Neukamm S. 2021. Optimal homogenization rates in stochastic homogenization
    of nonlinear uniformly elliptic equations and systems. Archive for Rational Mechanics
    and Analysis. 242(1), 343–452.
  mla: Fischer, Julian L., and Stefan Neukamm. “Optimal Homogenization Rates in Stochastic
    Homogenization of Nonlinear Uniformly Elliptic Equations and Systems.” <i>Archive
    for Rational Mechanics and Analysis</i>, vol. 242, no. 1, Springer Nature, 2021,
    pp. 343–452, doi:<a href="https://doi.org/10.1007/s00205-021-01686-9">10.1007/s00205-021-01686-9</a>.
  short: J.L. Fischer, S. Neukamm, Archive for Rational Mechanics and Analysis 242
    (2021) 343–452.
date_created: 2021-12-16T12:12:33Z
date_published: 2021-06-30T00:00:00Z
date_updated: 2023-08-17T06:23:21Z
day: '30'
ddc:
- '530'
department:
- _id: JuFi
doi: 10.1007/s00205-021-01686-9
external_id:
  arxiv:
  - '1908.02273'
  isi:
  - '000668431200001'
file:
- access_level: open_access
  checksum: cc830b739aed83ca2e32c4e0ce266a4c
  content_type: application/pdf
  creator: cchlebak
  date_created: 2021-12-16T14:58:08Z
  date_updated: 2021-12-16T14:58:08Z
  file_id: '10558'
  file_name: 2021_ArchRatMechAnalysis_Fischer.pdf
  file_size: 1640121
  relation: main_file
  success: 1
file_date_updated: 2021-12-16T14:58:08Z
has_accepted_license: '1'
intvolume: '       242'
isi: 1
issue: '1'
keyword:
- Mechanical Engineering
- Mathematics (miscellaneous)
- Analysis
language:
- iso: eng
month: '06'
oa: 1
oa_version: Published Version
page: 343-452
publication: Archive for Rational Mechanics and Analysis
publication_identifier:
  eissn:
  - 1432-0673
  issn:
  - 0003-9527
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
scopus_import: '1'
status: public
title: Optimal homogenization rates in stochastic homogenization of nonlinear uniformly
  elliptic equations and systems
tmp:
  image: /images/cc_by.png
  legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
  name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
  short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 242
year: '2021'
...
---
_id: '10866'
abstract:
- lang: eng
  text: Recent discoveries have shown that, when two layers of van der Waals (vdW)
    materials are superimposed with a relative twist angle between them, the electronic
    properties of the coupled system can be dramatically altered. Here, we demonstrate
    that a similar concept can be extended to the optics realm, particularly to propagating
    phonon polaritons–hybrid light-matter interactions. To do this, we fabricate stacks
    composed of two twisted slabs of a vdW crystal (α-MoO3) supporting anisotropic
    phonon polaritons (PhPs), and image the propagation of the latter when launched
    by localized sources. Our images reveal that, under a critical angle, the PhPs
    isofrequency curve undergoes a topological transition, in which the propagation
    of PhPs is strongly guided (canalization regime) along predetermined directions
    without geometric spreading. These results demonstrate a new degree of freedom
    (twist angle) for controlling the propagation of polaritons at the nanoscale with
    potential for nanoimaging, (bio)-sensing, or heat management.
acknowledgement: "J.T.-G. and G.Á.-P. acknowledge support through the Severo Ochoa
  Program from the\r\nGovernment of the Principality of Asturias (nos. PA-18-PF-BP17-126
  and PA20-PF-BP19-053,\r\nrespectively). J. M-S acknowledges financial support through
  the Ramón y Cajal Program from\r\nthe Government of Spain (RYC2018-026196-I). A.Y.N.
  acknowledges the Spanish Ministry of\r\nScience, Innovation and Universities (national
  project no. MAT201788358-C3-3-R). P.A.-G.\r\nacknowledges support from the European
  Research Council under starting grant no. 715496,\r\n2DNANOPTICA."
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Jiahua
  full_name: Duan, Jiahua
  last_name: Duan
- first_name: Nathaniel
  full_name: Capote-Robayna, Nathaniel
  last_name: Capote-Robayna
- first_name: Javier
  full_name: Taboada-Gutiérrez, Javier
  last_name: Taboada-Gutiérrez
- first_name: Gonzalo
  full_name: Álvarez-Pérez, Gonzalo
  last_name: Álvarez-Pérez
- first_name: Ivan
  full_name: Prieto Gonzalez, Ivan
  id: 2A307FE2-F248-11E8-B48F-1D18A9856A87
  last_name: Prieto Gonzalez
  orcid: 0000-0002-7370-5357
- first_name: Javier
  full_name: Martín-Sánchez, Javier
  last_name: Martín-Sánchez
- first_name: Alexey Y.
  full_name: Nikitin, Alexey Y.
  last_name: Nikitin
- first_name: Pablo
  full_name: Alonso-González, Pablo
  last_name: Alonso-González
citation:
  ama: 'Duan J, Capote-Robayna N, Taboada-Gutiérrez J, et al. Twisted nano-optics:
    Manipulating light at the nanoscale with twisted phonon polaritonic slabs. <i>Nano
    Letters</i>. 2020;20(7):5323-5329. doi:<a href="https://doi.org/10.1021/acs.nanolett.0c01673">10.1021/acs.nanolett.0c01673</a>'
  apa: 'Duan, J., Capote-Robayna, N., Taboada-Gutiérrez, J., Álvarez-Pérez, G., Prieto
    Gonzalez, I., Martín-Sánchez, J., … Alonso-González, P. (2020). Twisted nano-optics:
    Manipulating light at the nanoscale with twisted phonon polaritonic slabs. <i>Nano
    Letters</i>. American Chemical Society. <a href="https://doi.org/10.1021/acs.nanolett.0c01673">https://doi.org/10.1021/acs.nanolett.0c01673</a>'
  chicago: 'Duan, Jiahua, Nathaniel Capote-Robayna, Javier Taboada-Gutiérrez, Gonzalo
    Álvarez-Pérez, Ivan Prieto Gonzalez, Javier Martín-Sánchez, Alexey Y. Nikitin,
    and Pablo Alonso-González. “Twisted Nano-Optics: Manipulating Light at the Nanoscale
    with Twisted Phonon Polaritonic Slabs.” <i>Nano Letters</i>. American Chemical
    Society, 2020. <a href="https://doi.org/10.1021/acs.nanolett.0c01673">https://doi.org/10.1021/acs.nanolett.0c01673</a>.'
  ieee: 'J. Duan <i>et al.</i>, “Twisted nano-optics: Manipulating light at the nanoscale
    with twisted phonon polaritonic slabs,” <i>Nano Letters</i>, vol. 20, no. 7. American
    Chemical Society, pp. 5323–5329, 2020.'
  ista: 'Duan J, Capote-Robayna N, Taboada-Gutiérrez J, Álvarez-Pérez G, Prieto Gonzalez
    I, Martín-Sánchez J, Nikitin AY, Alonso-González P. 2020. Twisted nano-optics:
    Manipulating light at the nanoscale with twisted phonon polaritonic slabs. Nano
    Letters. 20(7), 5323–5329.'
  mla: 'Duan, Jiahua, et al. “Twisted Nano-Optics: Manipulating Light at the Nanoscale
    with Twisted Phonon Polaritonic Slabs.” <i>Nano Letters</i>, vol. 20, no. 7, American
    Chemical Society, 2020, pp. 5323–29, doi:<a href="https://doi.org/10.1021/acs.nanolett.0c01673">10.1021/acs.nanolett.0c01673</a>.'
  short: J. Duan, N. Capote-Robayna, J. Taboada-Gutiérrez, G. Álvarez-Pérez, I. Prieto
    Gonzalez, J. Martín-Sánchez, A.Y. Nikitin, P. Alonso-González, Nano Letters 20
    (2020) 5323–5329.
date_created: 2022-03-18T11:37:38Z
date_published: 2020-07-01T00:00:00Z
date_updated: 2023-09-05T12:05:58Z
day: '01'
department:
- _id: NanoFab
doi: 10.1021/acs.nanolett.0c01673
external_id:
  arxiv:
  - '2004.14599'
  isi:
  - '000548893200082'
  pmid:
  - '32530634'
intvolume: '        20'
isi: 1
issue: '7'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://arxiv.org/abs/2004.14599
month: '07'
oa: 1
oa_version: Preprint
page: 5323-5329
pmid: 1
publication: Nano Letters
publication_identifier:
  eissn:
  - 1530-6992
  issn:
  - 1530-6984
publication_status: published
publisher: American Chemical Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: 'Twisted nano-optics: Manipulating light at the nanoscale with twisted phonon
  polaritonic slabs'
type: journal_article
user_id: c635000d-4b10-11ee-a964-aac5a93f6ac1
volume: 20
year: '2020'
...
---
_id: '8366'
abstract:
- lang: eng
  text: "Fabrication of curved shells plays an important role in modern design, industry,
    and science. Among their remarkable properties are, for example, aesthetics of
    organic shapes, ability to evenly distribute loads, or efficient flow separation.
    They find applications across vast length scales ranging from sky-scraper architecture
    to microscopic devices. But, at\r\nthe same time, the design of curved shells
    and their manufacturing process pose a variety of challenges. In this thesis,
    they are addressed from several perspectives. In particular, this thesis presents
    approaches based on the transformation of initially flat sheets into the target
    curved surfaces. This involves problems of interactive design of shells with nontrivial
    mechanical constraints, inverse design of complex structural materials, and data-driven
    modeling of delicate and time-dependent physical properties. At the same time,
    two newly-developed self-morphing mechanisms targeting flat-to-curved transformation
    are presented.\r\nIn architecture, doubly curved surfaces can be realized as cold
    bent glass panelizations. Originally flat glass panels are bent into frames and
    remain stressed. This is a cost-efficient fabrication approach compared to hot
    bending, when glass panels are shaped plastically. However such constructions
    are prone to breaking during bending, and it is highly\r\nnontrivial to navigate
    the design space, keeping the panels fabricable and aesthetically pleasing at
    the same time. We introduce an interactive design system for cold bent glass façades,
    while previously even offline optimization for such scenarios has not been sufficiently
    developed. Our method is based on a deep learning approach providing quick\r\nand
    high precision estimation of glass panel shape and stress while handling the shape\r\nmultimodality.\r\nFabrication
    of smaller objects of scales below 1 m, can also greatly benefit from shaping
    originally flat sheets. In this respect, we designed new self-morphing shell mechanisms
    transforming from an initial flat state to a doubly curved state with high precision
    and detail. Our so-called CurveUps demonstrate the encodement of the geometric
    information\r\ninto the shell. Furthermore, we explored the frontiers of programmable
    materials and showed how temporal information can additionally be encoded into
    a flat shell. This allows prescribing deformation sequences for doubly curved
    surfaces and, thus, facilitates self-collision avoidance enabling complex shapes
    and functionalities otherwise impossible.\r\nBoth of these methods include inverse
    design tools keeping the user in the design loop."
acknowledged_ssus:
- _id: M-Shop
- _id: ScienComp
acknowledgement: "During the work on this thesis, I received substantial support from
  IST Austria’s scientific service units. A big thank you to Todor Asenov and other
  Miba Machine Shop team members for their help with fabrication of experimental prototypes.
  In addition, I would like to thank Scientific Computing team for the support with
  high performance computing.\r\nFinancial support was provided by the European Research
  Council (ERC) under grant agreement No 715767 - MATERIALIZABLE: Intelligent fabrication-oriented
  Computational Design and Modeling, which I gratefully acknowledge."
alternative_title:
- ISTA Thesis
article_processing_charge: No
author:
- first_name: Ruslan
  full_name: Guseinov, Ruslan
  id: 3AB45EE2-F248-11E8-B48F-1D18A9856A87
  last_name: Guseinov
  orcid: 0000-0001-9819-5077
citation:
  ama: 'Guseinov R. Computational design of curved thin shells: From glass façades
    to programmable matter. 2020. doi:<a href="https://doi.org/10.15479/AT:ISTA:8366">10.15479/AT:ISTA:8366</a>'
  apa: 'Guseinov, R. (2020). <i>Computational design of curved thin shells: From glass
    façades to programmable matter</i>. Institute of Science and Technology Austria.
    <a href="https://doi.org/10.15479/AT:ISTA:8366">https://doi.org/10.15479/AT:ISTA:8366</a>'
  chicago: 'Guseinov, Ruslan. “Computational Design of Curved Thin Shells: From Glass
    Façades to Programmable Matter.” Institute of Science and Technology Austria,
    2020. <a href="https://doi.org/10.15479/AT:ISTA:8366">https://doi.org/10.15479/AT:ISTA:8366</a>.'
  ieee: 'R. Guseinov, “Computational design of curved thin shells: From glass façades
    to programmable matter,” Institute of Science and Technology Austria, 2020.'
  ista: 'Guseinov R. 2020. Computational design of curved thin shells: From glass
    façades to programmable matter. Institute of Science and Technology Austria.'
  mla: 'Guseinov, Ruslan. <i>Computational Design of Curved Thin Shells: From Glass
    Façades to Programmable Matter</i>. Institute of Science and Technology Austria,
    2020, doi:<a href="https://doi.org/10.15479/AT:ISTA:8366">10.15479/AT:ISTA:8366</a>.'
  short: 'R. Guseinov, Computational Design of Curved Thin Shells: From Glass Façades
    to Programmable Matter, Institute of Science and Technology Austria, 2020.'
date_created: 2020-09-10T16:19:55Z
date_published: 2020-09-21T00:00:00Z
date_updated: 2024-02-21T12:44:29Z
day: '21'
ddc:
- '000'
degree_awarded: PhD
department:
- _id: BeBi
doi: 10.15479/AT:ISTA:8366
ec_funded: 1
file:
- access_level: open_access
  checksum: f8da89553da36037296b0a80f14ebf50
  content_type: application/pdf
  creator: rguseino
  date_created: 2020-09-10T16:11:49Z
  date_updated: 2020-09-10T16:11:49Z
  file_id: '8367'
  file_name: thesis_rguseinov.pdf
  file_size: 70950442
  relation: main_file
  success: 1
- access_level: closed
  checksum: e8fd944c960c20e0e27e6548af69121d
  content_type: application/x-zip-compressed
  creator: rguseino
  date_created: 2020-09-11T09:39:48Z
  date_updated: 2020-09-16T15:11:01Z
  file_id: '8374'
  file_name: thesis_source.zip
  file_size: 76207597
  relation: source_file
file_date_updated: 2020-09-16T15:11:01Z
has_accepted_license: '1'
keyword:
- computer-aided design
- shape modeling
- self-morphing
- mechanical engineering
language:
- iso: eng
month: '09'
oa: 1
oa_version: Published Version
page: '118'
project:
- _id: 24F9549A-B435-11E9-9278-68D0E5697425
  call_identifier: H2020
  grant_number: '715767'
  name: 'MATERIALIZABLE: Intelligent fabrication-oriented Computational Design and
    Modeling'
publication_identifier:
  isbn:
  - 978-3-99078-010-7
  issn:
  - 2663-337X
publication_status: published
publisher: Institute of Science and Technology Austria
related_material:
  record:
  - id: '7151'
    relation: research_data
    status: deleted
  - id: '7262'
    relation: part_of_dissertation
    status: public
  - id: '8562'
    relation: part_of_dissertation
    status: public
  - id: '1001'
    relation: part_of_dissertation
    status: public
  - id: '8375'
    relation: research_data
    status: public
status: public
supervisor:
- first_name: Bernd
  full_name: Bickel, Bernd
  id: 49876194-F248-11E8-B48F-1D18A9856A87
  last_name: Bickel
  orcid: 0000-0001-6511-9385
title: 'Computational design of curved thin shells: From glass façades to programmable
  matter'
type: dissertation
user_id: c635000d-4b10-11ee-a964-aac5a93f6ac1
year: '2020'
...
---
_id: '7262'
abstract:
- lang: eng
  text: Advances in shape-morphing materials, such as hydrogels, shape-memory polymers
    and light-responsive polymers have enabled prescribing self-directed deformations
    of initially flat geometries. However, most proposed solutions evolve towards
    a target geometry without considering time-dependent actuation paths. To achieve
    more complex geometries and avoid self-collisions, it is critical to encode a
    spatial and temporal shape evolution within the initially flat shell. Recent realizations
    of time-dependent morphing are limited to the actuation of few, discrete hinges
    and cannot form doubly curved surfaces. Here, we demonstrate a method for encoding
    temporal shape evolution in architected shells that assume complex shapes and
    doubly curved geometries. The shells are non-periodic tessellations of pre-stressed
    contractile unit cells that soften in water at rates prescribed locally by mesostructure
    geometry. The ensuing midplane contraction is coupled to the formation of encoded
    curvatures. We propose an inverse design tool based on a data-driven model for
    unit cells’ temporal responses.
article_number: '237'
article_processing_charge: No
article_type: original
author:
- first_name: Ruslan
  full_name: Guseinov, Ruslan
  id: 3AB45EE2-F248-11E8-B48F-1D18A9856A87
  last_name: Guseinov
  orcid: 0000-0001-9819-5077
- first_name: Connor
  full_name: McMahan, Connor
  last_name: McMahan
- first_name: Jesus
  full_name: Perez Rodriguez, Jesus
  id: 2DC83906-F248-11E8-B48F-1D18A9856A87
  last_name: Perez Rodriguez
- first_name: Chiara
  full_name: Daraio, Chiara
  last_name: Daraio
- first_name: Bernd
  full_name: Bickel, Bernd
  id: 49876194-F248-11E8-B48F-1D18A9856A87
  last_name: Bickel
  orcid: 0000-0001-6511-9385
citation:
  ama: Guseinov R, McMahan C, Perez Rodriguez J, Daraio C, Bickel B. Programming temporal
    morphing of self-actuated shells. <i>Nature Communications</i>. 2020;11. doi:<a
    href="https://doi.org/10.1038/s41467-019-14015-2">10.1038/s41467-019-14015-2</a>
  apa: Guseinov, R., McMahan, C., Perez Rodriguez, J., Daraio, C., &#38; Bickel, B.
    (2020). Programming temporal morphing of self-actuated shells. <i>Nature Communications</i>.
    Springer Nature. <a href="https://doi.org/10.1038/s41467-019-14015-2">https://doi.org/10.1038/s41467-019-14015-2</a>
  chicago: Guseinov, Ruslan, Connor McMahan, Jesus Perez Rodriguez, Chiara Daraio,
    and Bernd Bickel. “Programming Temporal Morphing of Self-Actuated Shells.” <i>Nature
    Communications</i>. Springer Nature, 2020. <a href="https://doi.org/10.1038/s41467-019-14015-2">https://doi.org/10.1038/s41467-019-14015-2</a>.
  ieee: R. Guseinov, C. McMahan, J. Perez Rodriguez, C. Daraio, and B. Bickel, “Programming
    temporal morphing of self-actuated shells,” <i>Nature Communications</i>, vol.
    11. Springer Nature, 2020.
  ista: Guseinov R, McMahan C, Perez Rodriguez J, Daraio C, Bickel B. 2020. Programming
    temporal morphing of self-actuated shells. Nature Communications. 11, 237.
  mla: Guseinov, Ruslan, et al. “Programming Temporal Morphing of Self-Actuated Shells.”
    <i>Nature Communications</i>, vol. 11, 237, Springer Nature, 2020, doi:<a href="https://doi.org/10.1038/s41467-019-14015-2">10.1038/s41467-019-14015-2</a>.
  short: R. Guseinov, C. McMahan, J. Perez Rodriguez, C. Daraio, B. Bickel, Nature
    Communications 11 (2020).
date_created: 2020-01-13T16:54:26Z
date_published: 2020-01-13T00:00:00Z
date_updated: 2024-02-21T12:45:02Z
day: '13'
ddc:
- '000'
department:
- _id: BeBi
doi: 10.1038/s41467-019-14015-2
ec_funded: 1
external_id:
  isi:
  - '000511916800015'
file:
- access_level: open_access
  checksum: 7db23fef2f4cda712f17f1004116ddff
  content_type: application/pdf
  creator: rguseino
  date_created: 2020-01-15T14:35:34Z
  date_updated: 2020-07-14T12:47:55Z
  file_id: '7336'
  file_name: 2020_NatureComm_Guseinov.pdf
  file_size: 1315270
  relation: main_file
file_date_updated: 2020-07-14T12:47:55Z
has_accepted_license: '1'
intvolume: '        11'
isi: 1
keyword:
- Design
- Synthesis and processing
- Mechanical engineering
- Polymers
language:
- iso: eng
month: '01'
oa: 1
oa_version: Published Version
project:
- _id: 260C2330-B435-11E9-9278-68D0E5697425
  call_identifier: H2020
  grant_number: '754411'
  name: ISTplus - Postdoctoral Fellowships
- _id: 24F9549A-B435-11E9-9278-68D0E5697425
  call_identifier: H2020
  grant_number: '715767'
  name: 'MATERIALIZABLE: Intelligent fabrication-oriented Computational Design and
    Modeling'
publication: Nature Communications
publication_identifier:
  issn:
  - 2041-1723
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
related_material:
  link:
  - description: News on IST Homepage
    relation: press_release
    url: https://ist.ac.at/en/news/geometry-meets-time/
  record:
  - id: '8366'
    relation: dissertation_contains
    status: public
  - id: '7154'
    relation: research_data
    status: public
scopus_import: '1'
status: public
title: Programming temporal morphing of self-actuated shells
tmp:
  image: /images/cc_by.png
  legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
  name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
  short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 11
year: '2020'
...
---
_id: '8418'
abstract:
- lang: eng
  text: For the Restricted Circular Planar 3 Body Problem, we show that there exists
    an open set U in phase space of fixed measure, where the set of initial points
    which lead to collision is O(μ120) dense as μ→0.
article_processing_charge: No
article_type: original
author:
- first_name: Marcel
  full_name: Guardia, Marcel
  last_name: Guardia
- first_name: Vadim
  full_name: Kaloshin, Vadim
  id: FE553552-CDE8-11E9-B324-C0EBE5697425
  last_name: Kaloshin
  orcid: 0000-0002-6051-2628
- first_name: Jianlu
  full_name: Zhang, Jianlu
  last_name: Zhang
citation:
  ama: Guardia M, Kaloshin V, Zhang J. Asymptotic density of collision orbits in the
    Restricted Circular Planar 3 Body Problem. <i>Archive for Rational Mechanics and
    Analysis</i>. 2019;233(2):799-836. doi:<a href="https://doi.org/10.1007/s00205-019-01368-7">10.1007/s00205-019-01368-7</a>
  apa: Guardia, M., Kaloshin, V., &#38; Zhang, J. (2019). Asymptotic density of collision
    orbits in the Restricted Circular Planar 3 Body Problem. <i>Archive for Rational
    Mechanics and Analysis</i>. Springer Nature. <a href="https://doi.org/10.1007/s00205-019-01368-7">https://doi.org/10.1007/s00205-019-01368-7</a>
  chicago: Guardia, Marcel, Vadim Kaloshin, and Jianlu Zhang. “Asymptotic Density
    of Collision Orbits in the Restricted Circular Planar 3 Body Problem.” <i>Archive
    for Rational Mechanics and Analysis</i>. Springer Nature, 2019. <a href="https://doi.org/10.1007/s00205-019-01368-7">https://doi.org/10.1007/s00205-019-01368-7</a>.
  ieee: M. Guardia, V. Kaloshin, and J. Zhang, “Asymptotic density of collision orbits
    in the Restricted Circular Planar 3 Body Problem,” <i>Archive for Rational Mechanics
    and Analysis</i>, vol. 233, no. 2. Springer Nature, pp. 799–836, 2019.
  ista: Guardia M, Kaloshin V, Zhang J. 2019. Asymptotic density of collision orbits
    in the Restricted Circular Planar 3 Body Problem. Archive for Rational Mechanics
    and Analysis. 233(2), 799–836.
  mla: Guardia, Marcel, et al. “Asymptotic Density of Collision Orbits in the Restricted
    Circular Planar 3 Body Problem.” <i>Archive for Rational Mechanics and Analysis</i>,
    vol. 233, no. 2, Springer Nature, 2019, pp. 799–836, doi:<a href="https://doi.org/10.1007/s00205-019-01368-7">10.1007/s00205-019-01368-7</a>.
  short: M. Guardia, V. Kaloshin, J. Zhang, Archive for Rational Mechanics and Analysis
    233 (2019) 799–836.
date_created: 2020-09-17T10:41:51Z
date_published: 2019-03-12T00:00:00Z
date_updated: 2021-01-12T08:19:09Z
day: '12'
doi: 10.1007/s00205-019-01368-7
extern: '1'
intvolume: '       233'
issue: '2'
keyword:
- Mechanical Engineering
- Mathematics (miscellaneous)
- Analysis
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://doi.org/10.1007/s00205-019-01368-7
month: '03'
oa: 1
oa_version: Published Version
page: 799-836
publication: Archive for Rational Mechanics and Analysis
publication_identifier:
  issn:
  - 0003-9527
  - 1432-0673
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
status: public
title: Asymptotic density of collision orbits in the Restricted Circular Planar 3
  Body Problem
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 233
year: '2019'
...
---
_id: '13366'
abstract:
- lang: eng
  text: The ability to reversibly assemble nanoparticles using light is both fundamentally
    interesting and important for applications ranging from reversible data storage
    to controlled drug delivery. Here, the diverse approaches that have so far been
    developed to control the self-assembly of nanoparticles using light are reviewed
    and compared. These approaches include functionalizing nanoparticles with monolayers
    of photoresponsive molecules, placing them in photoresponsive media capable of
    reversibly protonating the particles under light, and decorating plasmonic nanoparticles
    with thermoresponsive polymers, to name just a few. The applicability of these
    methods to larger, micrometer-sized particles is also discussed. Finally, several
    perspectives on further developments in the field are offered.
article_number: '1905866'
article_processing_charge: No
article_type: original
author:
- first_name: Tong
  full_name: Bian, Tong
  last_name: Bian
- first_name: Zonglin
  full_name: Chu, Zonglin
  last_name: Chu
- first_name: Rafal
  full_name: Klajn, Rafal
  id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
  last_name: Klajn
citation:
  ama: Bian T, Chu Z, Klajn R. The many ways to assemble nanoparticles using light.
    <i>Advanced Materials</i>. 2019;32(20). doi:<a href="https://doi.org/10.1002/adma.201905866">10.1002/adma.201905866</a>
  apa: Bian, T., Chu, Z., &#38; Klajn, R. (2019). The many ways to assemble nanoparticles
    using light. <i>Advanced Materials</i>. Wiley. <a href="https://doi.org/10.1002/adma.201905866">https://doi.org/10.1002/adma.201905866</a>
  chicago: Bian, Tong, Zonglin Chu, and Rafal Klajn. “The Many Ways to Assemble Nanoparticles
    Using Light.” <i>Advanced Materials</i>. Wiley, 2019. <a href="https://doi.org/10.1002/adma.201905866">https://doi.org/10.1002/adma.201905866</a>.
  ieee: T. Bian, Z. Chu, and R. Klajn, “The many ways to assemble nanoparticles using
    light,” <i>Advanced Materials</i>, vol. 32, no. 20. Wiley, 2019.
  ista: Bian T, Chu Z, Klajn R. 2019. The many ways to assemble nanoparticles using
    light. Advanced Materials. 32(20), 1905866.
  mla: Bian, Tong, et al. “The Many Ways to Assemble Nanoparticles Using Light.” <i>Advanced
    Materials</i>, vol. 32, no. 20, 1905866, Wiley, 2019, doi:<a href="https://doi.org/10.1002/adma.201905866">10.1002/adma.201905866</a>.
  short: T. Bian, Z. Chu, R. Klajn, Advanced Materials 32 (2019).
date_created: 2023-08-01T09:37:26Z
date_published: 2019-11-19T00:00:00Z
date_updated: 2023-08-07T10:23:41Z
day: '19'
doi: 10.1002/adma.201905866
extern: '1'
external_id:
  pmid:
  - '31709655'
intvolume: '        32'
issue: '20'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '11'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
  eissn:
  - 1521-4095
  issn:
  - 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: The many ways to assemble nanoparticles using light
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 32
year: '2019'
...
---
_id: '13370'
abstract:
- lang: eng
  text: Efficient isomerization of photochromic molecules often requires conformational
    freedom and is typically not available under solvent-free conditions. Here, we
    report a general methodology allowing for reversible switching of such molecules
    on the surfaces of solid materials. Our method is based on dispersing photochromic
    compounds within polysilsesquioxane nanowire networks (PNNs), which can be fabricated
    as transparent, highly porous, micrometer-thick layers on various substrates.
    We found that azobenzene switching within the PNNs proceeded unusually fast compared
    with the same molecules in liquid solvents. Efficient isomerization of another
    photochromic system, spiropyran, from a colorless to a colored form was used to
    create reversible images in PNN-coated glass. The coloration reaction could be
    induced with sunlight and is of interest for developing “smart” windows.
article_processing_charge: No
article_type: original
author:
- first_name: Zonglin
  full_name: Chu, Zonglin
  last_name: Chu
- first_name: Rafal
  full_name: Klajn, Rafal
  id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
  last_name: Klajn
citation:
  ama: Chu Z, Klajn R. Polysilsesquioxane nanowire networks as an “Artificial Solvent”
    for reversible operation of photochromic molecules. <i>Nano Letters</i>. 2019;19(10):7106-7111.
    doi:<a href="https://doi.org/10.1021/acs.nanolett.9b02642">10.1021/acs.nanolett.9b02642</a>
  apa: Chu, Z., &#38; Klajn, R. (2019). Polysilsesquioxane nanowire networks as an
    “Artificial Solvent” for reversible operation of photochromic molecules. <i>Nano
    Letters</i>. American Chemical Society. <a href="https://doi.org/10.1021/acs.nanolett.9b02642">https://doi.org/10.1021/acs.nanolett.9b02642</a>
  chicago: Chu, Zonglin, and Rafal Klajn. “Polysilsesquioxane Nanowire Networks as
    an ‘Artificial Solvent’ for Reversible Operation of Photochromic Molecules.” <i>Nano
    Letters</i>. American Chemical Society, 2019. <a href="https://doi.org/10.1021/acs.nanolett.9b02642">https://doi.org/10.1021/acs.nanolett.9b02642</a>.
  ieee: Z. Chu and R. Klajn, “Polysilsesquioxane nanowire networks as an ‘Artificial
    Solvent’ for reversible operation of photochromic molecules,” <i>Nano Letters</i>,
    vol. 19, no. 10. American Chemical Society, pp. 7106–7111, 2019.
  ista: Chu Z, Klajn R. 2019. Polysilsesquioxane nanowire networks as an “Artificial
    Solvent” for reversible operation of photochromic molecules. Nano Letters. 19(10),
    7106–7111.
  mla: Chu, Zonglin, and Rafal Klajn. “Polysilsesquioxane Nanowire Networks as an
    ‘Artificial Solvent’ for Reversible Operation of Photochromic Molecules.” <i>Nano
    Letters</i>, vol. 19, no. 10, American Chemical Society, 2019, pp. 7106–11, doi:<a
    href="https://doi.org/10.1021/acs.nanolett.9b02642">10.1021/acs.nanolett.9b02642</a>.
  short: Z. Chu, R. Klajn, Nano Letters 19 (2019) 7106–7111.
date_created: 2023-08-01T09:38:23Z
date_published: 2019-09-20T00:00:00Z
date_updated: 2023-08-07T10:39:34Z
day: '20'
doi: 10.1021/acs.nanolett.9b02642
extern: '1'
external_id:
  pmid:
  - '31539469'
intvolume: '        19'
issue: '10'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
month: '09'
oa_version: None
page: 7106-7111
pmid: 1
publication: Nano Letters
publication_identifier:
  eissn:
  - 1530-6992
  issn:
  - 1530-6984
publication_status: published
publisher: American Chemical Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: Polysilsesquioxane nanowire networks as an “Artificial Solvent” for reversible
  operation of photochromic molecules
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 19
year: '2019'
...
---
_id: '10622'
abstract:
- lang: eng
  text: We demonstrate a method for manipulating small ensembles of vortices in multiply
    connected superconducting structures. A micron-size magnetic particle attached
    to the tip of a silicon cantilever is used to locally apply magnetic flux through
    the superconducting structure. By scanning the tip over the surface of the device
    and by utilizing the dynamical coupling between the vortices and the cantilever,
    a high-resolution spatial map of the different vortex configurations is obtained.
    Moving the tip to a particular location in the map stabilizes a distinct multivortex
    configuration. Thus, the scanning of the tip over a particular trajectory in space
    permits nontrivial operations to be performed, such as braiding of individual
    vortices within a larger vortex ensemble—a key capability required by many proposals
    for topological quantum computing.
acknowledgement: We are grateful to Nadya Mason, Taylor Hughes, and Alexey Bezryadin
  for useful discussions. This work was supported by the DOE Basic Energy Sciences
  under DE-SC0012649 and the Department of Physics and the Frederick Seitz Materials
  Research Laboratory Central Facilities at the University of Illinois.
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Hryhoriy
  full_name: Polshyn, Hryhoriy
  id: edfc7cb1-526e-11ec-b05a-e6ecc27e4e48
  last_name: Polshyn
  orcid: 0000-0001-8223-8896
- first_name: Tyler
  full_name: Naibert, Tyler
  last_name: Naibert
- first_name: Raffi
  full_name: Budakian, Raffi
  last_name: Budakian
citation:
  ama: Polshyn H, Naibert T, Budakian R. Manipulating multivortex states in superconducting
    structures. <i>Nano Letters</i>. 2019;19(8):5476-5482. doi:<a href="https://doi.org/10.1021/acs.nanolett.9b01983">10.1021/acs.nanolett.9b01983</a>
  apa: Polshyn, H., Naibert, T., &#38; Budakian, R. (2019). Manipulating multivortex
    states in superconducting structures. <i>Nano Letters</i>. American Chemical Society.
    <a href="https://doi.org/10.1021/acs.nanolett.9b01983">https://doi.org/10.1021/acs.nanolett.9b01983</a>
  chicago: Polshyn, Hryhoriy, Tyler Naibert, and Raffi Budakian. “Manipulating Multivortex
    States in Superconducting Structures.” <i>Nano Letters</i>. American Chemical
    Society, 2019. <a href="https://doi.org/10.1021/acs.nanolett.9b01983">https://doi.org/10.1021/acs.nanolett.9b01983</a>.
  ieee: H. Polshyn, T. Naibert, and R. Budakian, “Manipulating multivortex states
    in superconducting structures,” <i>Nano Letters</i>, vol. 19, no. 8. American
    Chemical Society, pp. 5476–5482, 2019.
  ista: Polshyn H, Naibert T, Budakian R. 2019. Manipulating multivortex states in
    superconducting structures. Nano Letters. 19(8), 5476–5482.
  mla: Polshyn, Hryhoriy, et al. “Manipulating Multivortex States in Superconducting
    Structures.” <i>Nano Letters</i>, vol. 19, no. 8, American Chemical Society, 2019,
    pp. 5476–82, doi:<a href="https://doi.org/10.1021/acs.nanolett.9b01983">10.1021/acs.nanolett.9b01983</a>.
  short: H. Polshyn, T. Naibert, R. Budakian, Nano Letters 19 (2019) 5476–5482.
date_created: 2022-01-13T15:11:14Z
date_published: 2019-06-27T00:00:00Z
date_updated: 2022-01-13T15:41:24Z
day: '27'
doi: 10.1021/acs.nanolett.9b01983
extern: '1'
external_id:
  arxiv:
  - '1905.06303'
  pmid:
  - '31246034'
intvolume: '        19'
issue: '8'
keyword:
- mechanical engineering
- condensed matter physics
- general materials science
- general chemistry
- bioengineering
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://arxiv.org/abs/1905.06303
month: '06'
oa: 1
oa_version: Preprint
page: 5476-5482
pmid: 1
publication: Nano Letters
publication_identifier:
  eissn:
  - 1530-6992
  issn:
  - 1530-6984
publication_status: published
publisher: American Chemical Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: Manipulating multivortex states in superconducting structures
type: journal_article
user_id: ea97e931-d5af-11eb-85d4-e6957dddbf17
volume: 19
year: '2019'
...
---
_id: '13375'
abstract:
- lang: eng
  text: 'Dissipative self-assembly leads to structures and materials that exist away
    from equilibrium by continuously exchanging energy and materials with the external
    environment. Although this mode of self-assembly is ubiquitous in nature, where
    it gives rise to functions such as signal processing, motility, self-healing,
    self-replication, and ultimately life, examples of dissipative self-assembly processes
    in man-made systems are few and far between. Herein, recent progress in developing
    diverse synthetic dissipative self-assembly systems is discussed. The systems
    reported thus far can be categorized into three classes, in which: i) the fuel
    chemically modifies the building blocks, thus triggering their self-assembly,
    ii) the fuel acts as a template interacting with the building blocks noncovalently,
    and iii) transient states are induced by the addition of two mutually exclusive
    stimuli. These early studies give rise to materials that would be difficult to
    obtain otherwise, including hydrogels with programmable lifetimes, vesicular nanoreactors,
    and membranes exhibiting transient conductivity.'
article_number: '1706750'
article_processing_charge: No
article_type: original
author:
- first_name: Soumen
  full_name: De, Soumen
  last_name: De
- first_name: Rafal
  full_name: Klajn, Rafal
  id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
  last_name: Klajn
citation:
  ama: De S, Klajn R. Dissipative self-assembly driven by the consumption of chemical
    fuels. <i>Advanced Materials</i>. 2018;30(41). doi:<a href="https://doi.org/10.1002/adma.201706750">10.1002/adma.201706750</a>
  apa: De, S., &#38; Klajn, R. (2018). Dissipative self-assembly driven by the consumption
    of chemical fuels. <i>Advanced Materials</i>. Wiley. <a href="https://doi.org/10.1002/adma.201706750">https://doi.org/10.1002/adma.201706750</a>
  chicago: De, Soumen, and Rafal Klajn. “Dissipative Self-Assembly Driven by the Consumption
    of Chemical Fuels.” <i>Advanced Materials</i>. Wiley, 2018. <a href="https://doi.org/10.1002/adma.201706750">https://doi.org/10.1002/adma.201706750</a>.
  ieee: S. De and R. Klajn, “Dissipative self-assembly driven by the consumption of
    chemical fuels,” <i>Advanced Materials</i>, vol. 30, no. 41. Wiley, 2018.
  ista: De S, Klajn R. 2018. Dissipative self-assembly driven by the consumption of
    chemical fuels. Advanced Materials. 30(41), 1706750.
  mla: De, Soumen, and Rafal Klajn. “Dissipative Self-Assembly Driven by the Consumption
    of Chemical Fuels.” <i>Advanced Materials</i>, vol. 30, no. 41, 1706750, Wiley,
    2018, doi:<a href="https://doi.org/10.1002/adma.201706750">10.1002/adma.201706750</a>.
  short: S. De, R. Klajn, Advanced Materials 30 (2018).
date_created: 2023-08-01T09:39:46Z
date_published: 2018-10-11T00:00:00Z
date_updated: 2023-08-07T10:56:26Z
day: '11'
doi: 10.1002/adma.201706750
extern: '1'
external_id:
  pmid:
  - '29520846'
intvolume: '        30'
issue: '41'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '10'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
  eissn:
  - 1521-4095
  issn:
  - 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Dissipative self-assembly driven by the consumption of chemical fuels
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 30
year: '2018'
...
