@article{12628, abstract = {Thick debris cover on glaciers can significantly reduce ice melt. However, several studies have suggested that debris-covered glaciers in the Himalaya might have lost mass at a rate similar to debris-free glaciers. We reconstruct elevation and mass changes for the debris-covered glaciers of the upper Langtang valley, Nepalese Himalaya, using a digital elevation model (DEM) from 1974 stereo Hexagon satellite data and the 2000 SRTM (Shuttle Radar Topography Mission) DEM. Uncertainties are high in the accumulation areas, due to data gaps in the SRTM and difficulties with delineation of the glacier borders. Even with these uncertainties, we obtain thinning rates comparable to those of several other studies in the Himalaya. In particular, we obtain a total mass balance for the investigated debris-covered glaciers of the basin of –0.32 ± 0.18 m w.e. a−1. However, there are major spatial differences both between glaciers and within any single glacier, exhibiting a very distinct nonlinear mass-balance profile with elevation. Through analysis of surface velocities derived from Landsat ETM+ imagery, we show that thinning occurs in areas of low velocity and low slope. These areas are prone to a general, dynamic decay of surface features and to the development of supraglacial lakes and ice cliffs, which may be responsible for a considerable increase in overall glacier ablation.}, author = {Pellicciotti, Francesca and Stephan, Christa and Miles, Evan and Herreid, Sam and Immerzeel, Walter W. and Bolch, Tobias}, issn = {1727-5652}, journal = {Journal of Glaciology}, keywords = {Earth-Surface Processes}, number = {226}, pages = {373--386}, publisher = {International Glaciological Society}, title = {{Mass-balance changes of the debris-covered glaciers in the Langtang Himal, Nepal, from 1974 to 1999}}, doi = {10.3189/2015jog13j237}, volume = {61}, year = {2015}, } @article{12632, abstract = {We investigate the performance of five glacier melt models over a multi-decadal period in order to assess their ability to model future glacier response. The models range from a simple degree-day model, based solely on air temperature, to more-sophisticated models, including the full shortwave radiation balance. In addition to the empirical models, the performance of a physically based energy-balance (EB) model is examined. The melt models are coupled to an accumulation and a surface evolution model and applied in a distributed manner to Rhonegletscher, Switzerland, over the period 1929–2012 at hourly resolution. For calibration, seasonal mass-balance measurements (2006–12) are used. Decadal ice volume changes for six periods in the years 1929–2012 serve for model validation. Over the period 2006–12, there are almost no differences in performance between the models, except for EB, which is less consistent with observations, likely due to lack of meteorological in situ data. However, simulations over the long term (1929–2012) reveal that models which include a separate term for shortwave radiation agree best with the observed ice volume changes, indicating that their melt relationships are robust in time and thus suitable for long-term modelling, in contrast to more empirical approaches that are oversensitive to temperature fluctuations.}, author = {Gabbi, Jeannette and Carenzo, Marco and Pellicciotti, Francesca and Bauder, Andreas and Funk, Martin}, issn = {1727-5652}, journal = {Journal of Glaciology}, keywords = {Earth-Surface Processes}, number = {224}, pages = {1140--1154}, publisher = {International Glaciological Society}, title = {{A comparison of empirical and physically based glacier surface melt models for long-term simulations of glacier response}}, doi = {10.3189/2014jog14j011}, volume = {60}, year = {2014}, } @article{12642, abstract = {Near-surface air temperature, typically measured at a height of 2 m, is the most important control on the energy exchange and the melt rate at a snow or ice surface. It is distributed in a simplistic manner in most glacier melt models by using constant linear lapse rates, which poorly represent the actual spatial and temporal variability of air temperature. In this paper, we test a simple thermodynamic model proposed by Greuell and Böhm in 1998 as an alternative, using a new dataset of air temperature measurements from along the flowline of Haut Glacier d’Arolla, Switzerland. The unmodified model performs little better than assuming a constant linear lapse rate. When modified to allow the ratio of the boundary layer height to the bulk heat transfer coefficient to vary along the flowline, the model matches measured air temperatures better, and a further reduction of the root-mean-square error is obtained, although there is still considerable scope for improvement. The modified model is shown to perform best under conditions favourable to the development of katabatic winds – few clouds, positive ambient air temperature, limited influence of synoptic or valley winds and a long fetch – but its performance is poor under cloudy conditions.}, author = {Petersen, Lene and Pellicciotti, Francesca and Juszak, Inge and Carenzo, Marco and Brock, Ben}, issn = {1727-5644}, journal = {Annals of Glaciology}, keywords = {Earth-Surface Processes}, number = {63}, pages = {120--130}, publisher = {International Glaciological Society}, title = {{Suitability of a constant air temperature lapse rate over an Alpine glacier: Testing the Greuell and Böhm model as an alternative}}, doi = {10.3189/2013aog63a477}, volume = {54}, year = {2013}, } @article{12648, abstract = {Distributed glacier melt models generally assume that the glacier surface consists of bare exposed ice and snow. In reality, many glaciers are wholly or partially covered in layers of debris that tend to suppress ablation rates. In this paper, an existing physically based point model for the ablation of debris-covered ice is incorporated in a distributed melt model and applied to Haut Glacier d'Arolla, Switzerland, which has three large patches of debris cover on its surface. The model is based on a 10 m resolution digital elevation model (DEM) of the area; each glacier pixel in the DEM is defined as either bare or debris-covered ice, and may be covered in snow that must be melted off before ice ablation is assumed to occur. Each debris-covered pixel is assigned a debris thickness value using probability distributions based on over 1000 manual thickness measurements. Locally observed meteorological data are used to run energy balance calculations in every pixel, using an approach suitable for snow, bare ice or debris-covered ice as appropriate. The use of the debris model significantly reduces the total ablation in the debris-covered areas, however the precise reduction is sensitive to the temperature extrapolation used in the model distribution because air near the debris surface tends to be slightly warmer than over bare ice. Overall results suggest that the debris patches, which cover 10% of the glacierized area, reduce total runoff from the glacierized part of the basin by up to 7%.}, author = {Reid, T. D. and Carenzo, M. and Pellicciotti, Francesca and Brock, B. W.}, issn = {0148-0227}, journal = {Journal of Geophysical Research: Atmospheres}, keywords = {Paleontology, Space and Planetary Science, Earth and Planetary Sciences (miscellaneous), Atmospheric Science, Earth-Surface Processes, Geochemistry and Petrology, Soil Science, Water Science and Technology, Ecology, Aquatic Science, Forestry, Oceanography, Geophysics}, number = {D18}, publisher = {American Geophysical Union}, title = {{Including debris cover effects in a distributed model of glacier ablation}}, doi = {10.1029/2012jd017795}, volume = {117}, year = {2012}, } @article{12651, abstract = {Temperature data from three Automatic Weather Stations and twelve Temperature Loggers are used to investigate the spatiotemporal variability of temperature over a glacier, its main atmospheric controls, the suitability of extrapolation techniques and their effect on melt modeling. We use data collected on Juncal Norte Glacier, central Chile, during one ablation season. We examine temporal and spatial variability in lapse rates (LRs), together with alternative statistical interpolation methods. The main control over the glacier thermal regime is the development of a katabatic boundary layer (KBL). Katabatic wind occurs at night and in the morning and is eroded in the afternoon. LRs reveal strong diurnal variability, with steeper LRs during the day when the katabatic wind weakens and shallower LRs during the night and morning. We suggest that temporally variable LRs should be used to account for the observed change. They tend to be steeper than equivalent constant LRs, and therefore result in a reduction in simulated melt compared to use of constant LRs when extrapolating from lower to higher elevations. In addition to the temporal variability, the temperature-elevation relationship varies also in space. Differences are evident between local LRs and including such variability in melt modeling affects melt simulations. Extrapolation methods based on the spatial variability of the observations after removal of the elevation trend, such as Inverse Distance Weighting or Kriging, do not seem necessary for simulations of gridded temperature data over a glacier.}, author = {Petersen, L. and Pellicciotti, Francesca}, issn = {0148-0227}, journal = {Journal of Geophysical Research: Atmospheres}, keywords = {Paleontology, Space and Planetary Science, Earth and Planetary Sciences (miscellaneous), Atmospheric Science, Earth-Surface Processes, Geochemistry and Petrology, Soil Science, Water Science and Technology, Ecology, Aquatic Science, Forestry, Oceanography, Geophysics}, number = {D23}, publisher = {American Geophysical Union}, title = {{Spatial and temporal variability of air temperature on a melting glacier: Atmospheric controls, extrapolation methods and their effect on melt modeling, Juncal Norte Glacier, Chile}}, doi = {10.1029/2011jd015842}, volume = {116}, year = {2011}, } @article{12658, abstract = {[1] During the ablation period 2001 a glaciometeorological experiment was carried out on Haut Glacier d'Arolla, Switzerland. Five meteorological stations were installed on the glacier, and one permanent automatic weather station in the glacier foreland. The altitudes of the stations ranged between 2500 and 3000 m a.s.l., and they were in operation from end of May to beginning of September 2001. The spatial arrangement of the stations and temporal duration of the measurements generated a unique data set enabling the analysis of the spatial and temporal variability of the meteorological variables across an alpine glacier. All measurements were taken at a nominal height of 2 m, and hourly averages were derived for the analysis. The wind regime was dominated by the glacier wind (mean value 2.8 m s−1) but due to erosion by the synoptic gradient wind, occasionally the wind would blow up the valley. A slight decrease in mean 2 m air temperatures with altitude was found, however the 2 m air temperature gradient varied greatly and frequently changed its sign. Mean relative humidity was 71% and exhibited limited spatial variation. Mean incoming shortwave radiation and albedo both generally increased with elevation. The different components of shortwave radiation are quantified with a parameterization scheme. Resulting spatial variations are mainly due to horizon obstruction and reflections from surrounding slopes, i.e., topography. The effect of clouds accounts for a loss of 30% of the extraterrestrial flux. Albedos derived from a Landsat TM image of 30 July show remarkably constant values, in the range 0.49 to 0.50, across snow covered parts of the glacier, while albedo is highly spatially variable below the zone of continuous snow cover. These results are verified with ground measurements and compared with parameterized albedo. Mean longwave radiative fluxes decreased with elevation due to lower air temperatures and the effect of upper hemisphere slopes. It is shown through parameterization that this effect would even be more pronounced without the effect of clouds. Results are discussed with respect to a similar study which has been carried out on Pasterze Glacier (Austria). The presented algorithms for interpolating, parameterizing and simulating variables and parameters in alpine regions are integrated in the software package AMUNDSEN which is freely available to be adapted and further developed by the community.}, author = {Strasser, Ulrich and Corripio, Javier and Pellicciotti, Francesca and Burlando, Paolo and Brock, Ben and Funk, Martin}, issn = {0148-0227}, journal = {Journal of Geophysical Research: Atmospheres}, keywords = {Paleontology, Space and Planetary Science, Earth and Planetary Sciences (miscellaneous), Atmospheric Science, Earth-Surface Processes, Geochemistry and Petrology, Soil Science, Water Science and Technology, Ecology, Aquatic Science, Forestry, Oceanography, Geophysics}, number = {D3}, publisher = {American Geophysical Union}, title = {{Spatial and temporal variability of meteorological variables at Haut Glacier d'Arolla (Switzerland) during the ablation season 2001: Measurements and simulations}}, doi = {10.1029/2003jd003973}, volume = {109}, year = {2004}, }