@article{10566,
  abstract     = {A versatile, scalable, room temperature and surfactant-free route for the synthesis of metal chalcogenide nanoparticles in aqueous solution is detailed here for the production of PbS and Cu-doped PbS nanoparticles. Subsequently, nanoparticles are annealed in a reducing atmosphere to remove surface oxide, and consolidated into dense polycrystalline materials by means of spark plasma sintering. By characterizing the transport properties of the sintered material, we observe the annealing step and the incorporation of Cu to play a key role in promoting the thermoelectric performance of PbS. The presence of Cu allows improving the electrical conductivity by increasing the charge carrier concentration and simultaneously maintaining a large charge carrier mobility, which overall translates into record power factors at ambient temperature, 2.3 mWm-1K−2. Simultaneously, the lattice thermal conductivity decreases with the introduction of Cu, leading to a record high ZT = 0.37 at room temperature and ZT = 1.22 at 773 K. Besides, a record average ZTave = 0.76 is demonstrated in the temperature range 320–773 K for n-type Pb0.955Cu0.045S.},
  author       = {Li, Mengyao and Liu, Yu and Zhang, Yu and Chang, Cheng and Zhang, Ting and Yang, Dawei and Xiao, Ke and Arbiol, Jordi and Ibáñez, Maria and Cabot, Andreu},
  issn         = {1385-8947},
  journal      = {Chemical Engineering Journal},
  publisher    = {Elsevier},
  title        = {{Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application}},
  doi          = {10.1016/j.cej.2021.133837},
  volume       = {433},
  year         = {2022},
}

@article{9304,
  abstract     = {The high processing cost, poor mechanical properties and moderate performance of Bi2Te3–based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce Bi2Te3-Cu2-xTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure Bi2Te3 nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of Cu2-xTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference Bi2Te3 nanomaterial, which is already very low. However, the introduction of Cu2-xTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that Cu2-xTe nanostructures, with a relatively low electron affinity, are able to inject electrons into Bi2Te3, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within Bi2Te3 domains associated with the accumulation of electrons in regions nearby a Cu2-xTe/Bi2Te3 heterojunction. Overall, with the incorporation of a proper amount of Cu2-xTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of Bi2Te3.},
  author       = {Zhang, Yu and Xing, Congcong and Liu, Yu and Li, Mengyao and Xiao, Ke and Guardia, Pablo and Lee, Seungho and Han, Xu and Moghaddam, Ahmad and Roa, Joan J and Arbiol, Jordi and Ibáñez, Maria and Pan, Kai and Prato, Mirko and Xie, Ying and Cabot, Andreu},
  issn         = {1385-8947},
  journal      = {Chemical Engineering Journal},
  number       = {8},
  publisher    = {Elsevier},
  title        = {{Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride}},
  doi          = {10.1016/j.cej.2021.129374},
  volume       = {418},
  year         = {2021},
}