---
_id: '14434'
abstract:
- lang: eng
text: High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen
evolution and reduction reactions (OER/ORR) as they offer numerous parameters
for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW
HEA nanoparticles are synthesized using a solution‐based low‐temperature approach.
Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions,
and modulated electronic structure, leading to superior OER performance with an
overpotential of 233 mV at 10 mA cm−2 and 276 mV at 100 mA cm−2.
Density functional theory calculations reveal the electronic structures of the
FeCoNiMoW active sites with an optimized d‐band center position that enables suitable
adsorption of OOH* intermediates and reduces the Gibbs free energy barrier in
the OER process. Aqueous zinc–air batteries (ZABs) based on this HEA demonstrate
a high open circuit potential of 1.59 V, a peak power density of 116.9 mW cm−2,
a specific capacity of 857 mAh gZn−1,
and excellent stability for over 660 h of continuous charge–discharge cycles.
Flexible and solid ZABs are also assembled and tested, displaying excellent charge–discharge
performance at different bending angles. This work shows the significance of 4d/5d
metal‐modulated electronic structure and optimized adsorption ability to improve
the performance of OER/ORR, ZABs, and beyond.
acknowledged_ssus:
- _id: EM-Fac
acknowledgement: The authors acknowledge funding from Generalitat de Catalunya 2021
SGR 01581; the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio
de Ciencia e Innovación; the National Natural Science Foundation of China (22102002);
the Anhui Provincial Natural Science Foundation (2108085QE192); Zhejiang Province
key research and development project (2023C01191); the Foundation of State Key Laboratory
of High-efficiency Utilization of Coal and Green Chemical Engineering (GrantNo.2022-K31);
and The Key Research and Development Program of Hebei Province (20314305D). IREC
is funded by the CERCA Programme from the Generalitat de Catalunya. L.L.Y. thanks
the China Scholarship Council (CSC) for the scholarship support (202008130132).
This research was supported by the Scientific Service Units (SSU) of ISTA (Institute
of Science and Technology Austria) through resources provided by the Electron Microscopy
Facility (EMF). S.L., S.H., and M.I. acknowledge funding by ISTA and the Werner
Siemens.
article_number: '2303719'
article_processing_charge: No
article_type: original
author:
- first_name: Ren
full_name: He, Ren
last_name: He
- first_name: Linlin
full_name: Yang, Linlin
last_name: Yang
- first_name: Yu
full_name: Zhang, Yu
last_name: Zhang
- first_name: Daochuan
full_name: Jiang, Daochuan
last_name: Jiang
- first_name: Seungho
full_name: Lee, Seungho
id: BB243B88-D767-11E9-B658-BC13E6697425
last_name: Lee
orcid: 0000-0002-6962-8598
- first_name: Sharona
full_name: Horta, Sharona
id: 03a7e858-01b1-11ec-8b71-99ae6c4a05bc
last_name: Horta
- first_name: Zhifu
full_name: Liang, Zhifu
last_name: Liang
- first_name: Xuan
full_name: Lu, Xuan
last_name: Lu
- first_name: Ahmad
full_name: Ostovari Moghaddam, Ahmad
last_name: Ostovari Moghaddam
- first_name: Junshan
full_name: Li, Junshan
last_name: Li
- first_name: Maria
full_name: Ibáñez, Maria
id: 43C61214-F248-11E8-B48F-1D18A9856A87
last_name: Ibáñez
orcid: 0000-0001-5013-2843
- first_name: Ying
full_name: Xu, Ying
last_name: Xu
- first_name: Yingtang
full_name: Zhou, Yingtang
last_name: Zhou
- first_name: Andreu
full_name: Cabot, Andreu
last_name: Cabot
citation:
ama: He R, Yang L, Zhang Y, et al. A 3d‐4d‐5d high entropy alloy as a bifunctional
oxygen catalyst for robust aqueous zinc–air batteries. Advanced Materials.
2023. doi:10.1002/adma.202303719
apa: He, R., Yang, L., Zhang, Y., Jiang, D., Lee, S., Horta, S., … Cabot, A. (2023).
A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen catalyst for robust aqueous
zinc–air batteries. Advanced Materials. Wiley. https://doi.org/10.1002/adma.202303719
chicago: He, Ren, Linlin Yang, Yu Zhang, Daochuan Jiang, Seungho Lee, Sharona Horta,
Zhifu Liang, et al. “A 3d‐4d‐5d High Entropy Alloy as a Bifunctional Oxygen Catalyst
for Robust Aqueous Zinc–Air Batteries.” Advanced Materials. Wiley, 2023.
https://doi.org/10.1002/adma.202303719.
ieee: R. He et al., “A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen
catalyst for robust aqueous zinc–air batteries,” Advanced Materials. Wiley,
2023.
ista: He R, Yang L, Zhang Y, Jiang D, Lee S, Horta S, Liang Z, Lu X, Ostovari Moghaddam
A, Li J, Ibáñez M, Xu Y, Zhou Y, Cabot A. 2023. A 3d‐4d‐5d high entropy alloy
as a bifunctional oxygen catalyst for robust aqueous zinc–air batteries. Advanced
Materials., 2303719.
mla: He, Ren, et al. “A 3d‐4d‐5d High Entropy Alloy as a Bifunctional Oxygen Catalyst
for Robust Aqueous Zinc–Air Batteries.” Advanced Materials, 2303719, Wiley,
2023, doi:10.1002/adma.202303719.
short: R. He, L. Yang, Y. Zhang, D. Jiang, S. Lee, S. Horta, Z. Liang, X. Lu, A.
Ostovari Moghaddam, J. Li, M. Ibáñez, Y. Xu, Y. Zhou, A. Cabot, Advanced Materials
(2023).
date_created: 2023-10-17T10:52:23Z
date_published: 2023-07-24T00:00:00Z
date_updated: 2023-12-13T13:03:23Z
day: '24'
department:
- _id: MaIb
doi: 10.1002/adma.202303719
external_id:
isi:
- '001083876900001'
pmid:
- '37487245'
isi: 1
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '07'
oa_version: None
pmid: 1
project:
- _id: 9B8F7476-BA93-11EA-9121-9846C619BF3A
name: 'HighTE: The Werner Siemens Laboratory for the High Throughput Discovery of
Semiconductors for Waste Heat Recovery'
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
- 1521-4095
publication_status: epub_ahead
publisher: Wiley
quality_controlled: '1'
status: public
title: A 3d‐4d‐5d high entropy alloy as a bifunctional oxygen catalyst for robust
aqueous zinc–air batteries
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
year: '2023'
...
---
_id: '14435'
abstract:
- lang: eng
text: Low‐cost, safe, and environmental‐friendly rechargeable aqueous zinc‐ion batteries
(ZIBs) are promising as next‐generation energy storage devices for wearable electronics
among other applications. However, sluggish ionic transport kinetics and the unstable
electrode structure during ionic insertion/extraction hampers their deployment.
Herein, we propose a new cathode material based on a layered metal chalcogenide
(LMC), bismuth telluride (Bi2Te3), coated
with polypyrrole (PPy). Taking advantage of the PPy coating, the Bi2Te3@PPy
composite presents strong ionic absorption affinity, high oxidation resistance,
and high structural stability. The ZIBs based on Bi2Te3@PPy
cathodes exhibit high capacities and ultra‐long lifespans of over 5000 cycles.
They also present outstanding stability even under bending. In addition, we analyze
here the reaction mechanism using in situ X‐ray diffraction, X‐ray photoelectron
spectroscopy, and computational tools and demonstrate that, in the aqueous system,
Zn2+ is not inserted into the cathode as previously assumed.
In contrast, proton charge storage dominates the process. Overall, this work not
only shows the great potential of LMCs as ZIBs cathode materials and the advantages
of PPy coating, but also clarifies the charge/discharge mechanism in rechargeable
ZIBs based on LMCs.
article_number: '2305128'
article_processing_charge: No
article_type: original
author:
- first_name: Guifang
full_name: Zeng, Guifang
last_name: Zeng
- first_name: Qing
full_name: Sun, Qing
last_name: Sun
- first_name: Sharona
full_name: Horta, Sharona
id: 03a7e858-01b1-11ec-8b71-99ae6c4a05bc
last_name: Horta
- first_name: Shang
full_name: Wang, Shang
last_name: Wang
- first_name: Xuan
full_name: Lu, Xuan
last_name: Lu
- first_name: Chaoyue
full_name: Zhang, Chaoyue
last_name: Zhang
- first_name: Jing
full_name: Li, Jing
last_name: Li
- first_name: Junshan
full_name: Li, Junshan
last_name: Li
- first_name: Lijie
full_name: Ci, Lijie
last_name: Ci
- first_name: Yanhong
full_name: Tian, Yanhong
last_name: Tian
- first_name: Maria
full_name: Ibáñez, Maria
id: 43C61214-F248-11E8-B48F-1D18A9856A87
last_name: Ibáñez
orcid: 0000-0001-5013-2843
- first_name: Andreu
full_name: Cabot, Andreu
last_name: Cabot
citation:
ama: 'Zeng G, Sun Q, Horta S, et al. A layered Bi2Te3@PPy cathode for aqueous zinc
ion batteries: Mechanism and application in printed flexible batteries. Advanced
Materials. doi:10.1002/adma.202305128'
apa: 'Zeng, G., Sun, Q., Horta, S., Wang, S., Lu, X., Zhang, C., … Cabot, A. (n.d.).
A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and application
in printed flexible batteries. Advanced Materials. Wiley. https://doi.org/10.1002/adma.202305128'
chicago: 'Zeng, Guifang, Qing Sun, Sharona Horta, Shang Wang, Xuan Lu, Chaoyue Zhang,
Jing Li, et al. “A Layered Bi2Te3@PPy Cathode for Aqueous Zinc Ion Batteries:
Mechanism and Application in Printed Flexible Batteries.” Advanced Materials.
Wiley, n.d. https://doi.org/10.1002/adma.202305128.'
ieee: 'G. Zeng et al., “A layered Bi2Te3@PPy cathode for aqueous zinc ion
batteries: Mechanism and application in printed flexible batteries,” Advanced
Materials. Wiley.'
ista: 'Zeng G, Sun Q, Horta S, Wang S, Lu X, Zhang C, Li J, Li J, Ci L, Tian Y,
Ibáñez M, Cabot A. A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries:
Mechanism and application in printed flexible batteries. Advanced Materials.,
2305128.'
mla: 'Zeng, Guifang, et al. “A Layered Bi2Te3@PPy Cathode for Aqueous Zinc Ion Batteries:
Mechanism and Application in Printed Flexible Batteries.” Advanced Materials,
2305128, Wiley, doi:10.1002/adma.202305128.'
short: G. Zeng, Q. Sun, S. Horta, S. Wang, X. Lu, C. Zhang, J. Li, J. Li, L. Ci,
Y. Tian, M. Ibáñez, A. Cabot, Advanced Materials (n.d.).
date_created: 2023-10-17T10:53:56Z
date_published: 2023-08-09T00:00:00Z
date_updated: 2023-12-13T13:03:53Z
day: '09'
department:
- _id: MaIb
doi: 10.1002/adma.202305128
external_id:
isi:
- '001085681000001'
pmid:
- '37555532'
isi: 1
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '08'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: accepted
publisher: Wiley
quality_controlled: '1'
status: public
title: 'A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and
application in printed flexible batteries'
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
year: '2023'
...
---
_id: '12710'
abstract:
- lang: eng
text: Surface curvature both emerges from, and influences the behavior of, living
objects at length scales ranging from cell membranes to single cells to tissues
and organs. The relevance of surface curvature in biology is supported by numerous
experimental and theoretical investigations in recent years. In this review, first,
a brief introduction to the key ideas of surface curvature in the context of biological
systems is given and the challenges that arise when measuring surface curvature
are discussed. Giving an overview of the emergence of curvature in biological
systems, its significance at different length scales becomes apparent. On the
other hand, summarizing current findings also shows that both single cells and
entire cell sheets, tissues or organisms respond to curvature by modulating their
shape and their migration behavior. Finally, the interplay between the distribution
of morphogens or micro-organisms and the emergence of curvature across length
scales is addressed with examples demonstrating these key mechanistic principles
of morphogenesis. Overall, this review highlights that curved interfaces are not
merely a passive by-product of the chemical, biological, and mechanical processes
but that curvature acts also as a signal that co-determines these processes.
acknowledgement: B.S. and A.R. contributed equally to this work. A.P.G.C. and P.R.F.
acknowledge the funding from Fundação para a Ciência e Tecnologia (Portugal), through
IDMEC, under LAETA project UIDB/50022/2020. T.H.V.P. acknowledges the funding from
Fundação para a Ciência e Tecnologia (Portugal), through Ph.D. Grant 2020.04417.BD.
A.S. acknowledges that this work was partially supported by the ATTRACT Investigator
Grant (no. A17/MS/11572821/MBRACE, to A.S.) from the Luxembourg National Research
Fund. The author thanks Gerardo Ceada for his help in the graphical representations.
N.A.K. acknowledges support from the European Research Council (grant 851960) and
the Gravitation Program “Materials Driven Regeneration,” funded by the Netherlands
Organization for Scientific Research (024.003.013). M.B.A. acknowledges support
from the French National Research Agency (grant ANR-201-8-CE1-3-0008 for the project
“Epimorph”). G.E.S.T. acknowledges funding by the Australian Research Council through
project DP200102593. A.C. acknowledges the funding from the Deutsche Forschungsgemeinschaft
(DFG) Emmy Noether Grant CI 203/-2 1, the Spanish Ministry of Science and Innovation
(PID2021-123013O-BI00) and the IKERBASQUE Basque Foundation for Science.
article_number: '2206110'
article_processing_charge: No
article_type: review
author:
- first_name: Barbara
full_name: Schamberger, Barbara
last_name: Schamberger
- first_name: Ricardo
full_name: Ziege, Ricardo
last_name: Ziege
- first_name: Karine
full_name: Anselme, Karine
last_name: Anselme
- first_name: Martine
full_name: Ben Amar, Martine
last_name: Ben Amar
- first_name: Michał
full_name: Bykowski, Michał
last_name: Bykowski
- first_name: André P.G.
full_name: Castro, André P.G.
last_name: Castro
- first_name: Amaia
full_name: Cipitria, Amaia
last_name: Cipitria
- first_name: Rhoslyn A.
full_name: Coles, Rhoslyn A.
last_name: Coles
- first_name: Rumiana
full_name: Dimova, Rumiana
last_name: Dimova
- first_name: Michaela
full_name: Eder, Michaela
last_name: Eder
- first_name: Sebastian
full_name: Ehrig, Sebastian
last_name: Ehrig
- first_name: Luis M.
full_name: Escudero, Luis M.
last_name: Escudero
- first_name: Myfanwy E.
full_name: Evans, Myfanwy E.
last_name: Evans
- first_name: Paulo R.
full_name: Fernandes, Paulo R.
last_name: Fernandes
- first_name: Peter
full_name: Fratzl, Peter
last_name: Fratzl
- first_name: Liesbet
full_name: Geris, Liesbet
last_name: Geris
- first_name: Notburga
full_name: Gierlinger, Notburga
last_name: Gierlinger
- first_name: Edouard B
full_name: Hannezo, Edouard B
id: 3A9DB764-F248-11E8-B48F-1D18A9856A87
last_name: Hannezo
orcid: 0000-0001-6005-1561
- first_name: Aleš
full_name: Iglič, Aleš
last_name: Iglič
- first_name: Jacob J.K.
full_name: Kirkensgaard, Jacob J.K.
last_name: Kirkensgaard
- first_name: Philip
full_name: Kollmannsberger, Philip
last_name: Kollmannsberger
- first_name: Łucja
full_name: Kowalewska, Łucja
last_name: Kowalewska
- first_name: Nicholas A.
full_name: Kurniawan, Nicholas A.
last_name: Kurniawan
- first_name: Ioannis
full_name: Papantoniou, Ioannis
last_name: Papantoniou
- first_name: Laurent
full_name: Pieuchot, Laurent
last_name: Pieuchot
- first_name: Tiago H.V.
full_name: Pires, Tiago H.V.
last_name: Pires
- first_name: Lars D.
full_name: Renner, Lars D.
last_name: Renner
- first_name: Andrew O.
full_name: Sageman-Furnas, Andrew O.
last_name: Sageman-Furnas
- first_name: Gerd E.
full_name: Schröder-Turk, Gerd E.
last_name: Schröder-Turk
- first_name: Anupam
full_name: Sengupta, Anupam
last_name: Sengupta
- first_name: Vikas R.
full_name: Sharma, Vikas R.
last_name: Sharma
- first_name: Antonio
full_name: Tagua, Antonio
last_name: Tagua
- first_name: Caterina
full_name: Tomba, Caterina
last_name: Tomba
- first_name: Xavier
full_name: Trepat, Xavier
last_name: Trepat
- first_name: Sarah L.
full_name: Waters, Sarah L.
last_name: Waters
- first_name: Edwina F.
full_name: Yeo, Edwina F.
last_name: Yeo
- first_name: Andreas
full_name: Roschger, Andreas
last_name: Roschger
- first_name: Cécile M.
full_name: Bidan, Cécile M.
last_name: Bidan
- first_name: John W.C.
full_name: Dunlop, John W.C.
last_name: Dunlop
citation:
ama: 'Schamberger B, Ziege R, Anselme K, et al. Curvature in biological systems:
Its quantification, emergence, and implications across the scales. Advanced
Materials. 2023;35(13). doi:10.1002/adma.202206110'
apa: 'Schamberger, B., Ziege, R., Anselme, K., Ben Amar, M., Bykowski, M., Castro,
A. P. G., … Dunlop, J. W. C. (2023). Curvature in biological systems: Its quantification,
emergence, and implications across the scales. Advanced Materials. Wiley.
https://doi.org/10.1002/adma.202206110'
chicago: 'Schamberger, Barbara, Ricardo Ziege, Karine Anselme, Martine Ben Amar,
Michał Bykowski, André P.G. Castro, Amaia Cipitria, et al. “Curvature in Biological
Systems: Its Quantification, Emergence, and Implications across the Scales.” Advanced
Materials. Wiley, 2023. https://doi.org/10.1002/adma.202206110.'
ieee: 'B. Schamberger et al., “Curvature in biological systems: Its quantification,
emergence, and implications across the scales,” Advanced Materials, vol.
35, no. 13. Wiley, 2023.'
ista: 'Schamberger B, Ziege R, Anselme K, Ben Amar M, Bykowski M, Castro APG, Cipitria
A, Coles RA, Dimova R, Eder M, Ehrig S, Escudero LM, Evans ME, Fernandes PR, Fratzl
P, Geris L, Gierlinger N, Hannezo EB, Iglič A, Kirkensgaard JJK, Kollmannsberger
P, Kowalewska Ł, Kurniawan NA, Papantoniou I, Pieuchot L, Pires THV, Renner LD,
Sageman-Furnas AO, Schröder-Turk GE, Sengupta A, Sharma VR, Tagua A, Tomba C,
Trepat X, Waters SL, Yeo EF, Roschger A, Bidan CM, Dunlop JWC. 2023. Curvature
in biological systems: Its quantification, emergence, and implications across
the scales. Advanced Materials. 35(13), 2206110.'
mla: 'Schamberger, Barbara, et al. “Curvature in Biological Systems: Its Quantification,
Emergence, and Implications across the Scales.” Advanced Materials, vol.
35, no. 13, 2206110, Wiley, 2023, doi:10.1002/adma.202206110.'
short: B. Schamberger, R. Ziege, K. Anselme, M. Ben Amar, M. Bykowski, A.P.G. Castro,
A. Cipitria, R.A. Coles, R. Dimova, M. Eder, S. Ehrig, L.M. Escudero, M.E. Evans,
P.R. Fernandes, P. Fratzl, L. Geris, N. Gierlinger, E.B. Hannezo, A. Iglič, J.J.K.
Kirkensgaard, P. Kollmannsberger, Ł. Kowalewska, N.A. Kurniawan, I. Papantoniou,
L. Pieuchot, T.H.V. Pires, L.D. Renner, A.O. Sageman-Furnas, G.E. Schröder-Turk,
A. Sengupta, V.R. Sharma, A. Tagua, C. Tomba, X. Trepat, S.L. Waters, E.F. Yeo,
A. Roschger, C.M. Bidan, J.W.C. Dunlop, Advanced Materials 35 (2023).
date_created: 2023-03-05T23:01:06Z
date_published: 2023-03-29T00:00:00Z
date_updated: 2023-09-26T10:56:46Z
day: '29'
ddc:
- '570'
department:
- _id: EdHa
doi: 10.1002/adma.202206110
external_id:
isi:
- '000941068900001'
pmid:
- '36461812'
file:
- access_level: open_access
checksum: 5c04d68130e97a0ecd1ca27fbc15a246
content_type: application/pdf
creator: dernst
date_created: 2023-09-26T10:51:56Z
date_updated: 2023-09-26T10:51:56Z
file_id: '14373'
file_name: 2023_AdvancedMaterials_Schamberger.pdf
file_size: 2898063
relation: main_file
success: 1
file_date_updated: 2023-09-26T10:51:56Z
has_accepted_license: '1'
intvolume: ' 35'
isi: 1
issue: '13'
language:
- iso: eng
month: '03'
oa: 1
oa_version: Published Version
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: 'Curvature in biological systems: Its quantification, emergence, and implications
across the scales'
tmp:
image: /images/cc_by.png
legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
short: CC BY (4.0)
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 35
year: '2023'
...
---
_id: '13355'
abstract:
- lang: eng
text: 'Supramolecular self-assembly in biological systems holds promise to convert
and amplify disease-specific signals to physical or mechanical signals that can
direct cell fate. However, it remains challenging to design physiologically stable
self-assembling systems that demonstrate tunable and predictable behavior. Here,
the use of zwitterionic tetrapeptide modalities to direct nanoparticle assembly
under physiological conditions is reported. The self-assembly of gold nanoparticles
can be activated by enzymatic unveiling of surface-bound zwitterionic tetrapeptides
through matrix metalloprotease-9 (MMP-9), which is overexpressed by cancer cells.
This robust nanoparticle assembly is achieved by multivalent, self-complementary
interactions of the zwitterionic tetrapeptides. In cancer cells that overexpress
MMP-9, the nanoparticle assembly process occurs near the cell membrane and causes
size-induced selection of cellular uptake mechanism, resulting in diminished cell
growth. The enzyme responsiveness, and therefore, indirectly, the uptake route
of the system can be programmed by customizing the peptide sequence: a simple
inversion of the two amino acids at the cleavage site completely inactivates the
enzyme responsiveness, self-assembly, and consequently changes the endocytic pathway.
This robust self-complementary, zwitterionic peptide design demonstrates the use
of enzyme-activated electrostatic side-chain patterns as powerful and customizable
peptide modalities to program nanoparticle self-assembly and alter cellular response
in biological context.'
article_number: '2104962'
article_processing_charge: No
article_type: original
author:
- first_name: Richard H.
full_name: Huang, Richard H.
last_name: Huang
- first_name: Nazia
full_name: Nayeem, Nazia
last_name: Nayeem
- first_name: Ye
full_name: He, Ye
last_name: He
- first_name: Jorge
full_name: Morales, Jorge
last_name: Morales
- first_name: Duncan
full_name: Graham, Duncan
last_name: Graham
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
- first_name: Maria
full_name: Contel, Maria
last_name: Contel
- first_name: Stephen
full_name: O'Brien, Stephen
last_name: O'Brien
- first_name: Rein V.
full_name: Ulijn, Rein V.
last_name: Ulijn
citation:
ama: Huang RH, Nayeem N, He Y, et al. Self‐complementary zwitterionic peptides direct
nanoparticle assembly and enable enzymatic selection of endocytic pathways. Advanced
Materials. 2022;34(1). doi:10.1002/adma.202104962
apa: Huang, R. H., Nayeem, N., He, Y., Morales, J., Graham, D., Klajn, R., … Ulijn,
R. V. (2022). Self‐complementary zwitterionic peptides direct nanoparticle assembly
and enable enzymatic selection of endocytic pathways. Advanced Materials.
Wiley. https://doi.org/10.1002/adma.202104962
chicago: Huang, Richard H., Nazia Nayeem, Ye He, Jorge Morales, Duncan Graham, Rafal
Klajn, Maria Contel, Stephen O’Brien, and Rein V. Ulijn. “Self‐complementary Zwitterionic
Peptides Direct Nanoparticle Assembly and Enable Enzymatic Selection of Endocytic
Pathways.” Advanced Materials. Wiley, 2022. https://doi.org/10.1002/adma.202104962.
ieee: R. H. Huang et al., “Self‐complementary zwitterionic peptides direct
nanoparticle assembly and enable enzymatic selection of endocytic pathways,” Advanced
Materials, vol. 34, no. 1. Wiley, 2022.
ista: Huang RH, Nayeem N, He Y, Morales J, Graham D, Klajn R, Contel M, O’Brien
S, Ulijn RV. 2022. Self‐complementary zwitterionic peptides direct nanoparticle
assembly and enable enzymatic selection of endocytic pathways. Advanced Materials.
34(1), 2104962.
mla: Huang, Richard H., et al. “Self‐complementary Zwitterionic Peptides Direct
Nanoparticle Assembly and Enable Enzymatic Selection of Endocytic Pathways.” Advanced
Materials, vol. 34, no. 1, 2104962, Wiley, 2022, doi:10.1002/adma.202104962.
short: R.H. Huang, N. Nayeem, Y. He, J. Morales, D. Graham, R. Klajn, M. Contel,
S. O’Brien, R.V. Ulijn, Advanced Materials 34 (2022).
date_created: 2023-08-01T09:33:26Z
date_published: 2022-01-06T00:00:00Z
date_updated: 2023-08-07T09:58:17Z
day: '06'
doi: 10.1002/adma.202104962
extern: '1'
external_id:
pmid:
- '34668253'
intvolume: ' 34'
issue: '1'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1002/adma.202104962
month: '01'
oa: 1
oa_version: Published Version
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Self‐complementary zwitterionic peptides direct nanoparticle assembly and enable
enzymatic selection of endocytic pathways
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 34
year: '2022'
...
---
_id: '10123'
abstract:
- lang: eng
text: Solution synthesis of particles emerged as an alternative to prepare thermoelectric
materials with less demanding processing conditions than conventional solid-state
synthetic methods. However, solution synthesis generally involves the presence
of additional molecules or ions belonging to the precursors or added to enable
solubility and/or regulate nucleation and growth. These molecules or ions can
end up in the particles as surface adsorbates and interfere in the material properties.
This work demonstrates that ionic adsorbates, in particular Na⁺ ions, are electrostatically
adsorbed in SnSe particles synthesized in water and play a crucial role not only
in directing the material nano/microstructure but also in determining the transport
properties of the consolidated material. In dense pellets prepared by sintering
SnSe particles, Na remains within the crystal lattice as dopant, in dislocations,
precipitates, and forming grain boundary complexions. These results highlight
the importance of considering all the possible unintentional impurities to establish
proper structure-property relationships and control material properties in solution-processed
thermoelectric materials.
acknowledged_ssus:
- _id: EM-Fac
- _id: NanoFab
acknowledgement: 'Y.L. and M.C. contributed equally to this work. This research was
supported by the Scientific Service Units (SSU) of IST Austria through resources
provided by Electron Microscopy Facility (EMF) and the Nanofabrication Facility
(NNF). This work was financially supported by IST Austria and the Werner Siemens
Foundation. Y.L. acknowledges funding from the European Union''s Horizon 2020 research
and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411.
M.C. has received funding from the European Union''s Horizon 2020 research and innovation
program under the Marie Skłodowska-Curie Grant Agreement No. 665385. Y.Y. and O.C.-M.
acknowledge the financial support from DFG within the project SFB 917: Nanoswitches.
J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program. C.C. acknowledges
funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N.'
article_number: '2106858'
article_processing_charge: Yes (via OA deal)
article_type: original
author:
- first_name: Yu
full_name: Liu, Yu
id: 2A70014E-F248-11E8-B48F-1D18A9856A87
last_name: Liu
orcid: 0000-0001-7313-6740
- first_name: Mariano
full_name: Calcabrini, Mariano
id: 45D7531A-F248-11E8-B48F-1D18A9856A87
last_name: Calcabrini
orcid: 0000-0003-4566-5877
- first_name: Yuan
full_name: Yu, Yuan
last_name: Yu
- first_name: Aziz
full_name: Genç, Aziz
last_name: Genç
- first_name: Cheng
full_name: Chang, Cheng
id: 9E331C2E-9F27-11E9-AE48-5033E6697425
last_name: Chang
orcid: 0000-0002-9515-4277
- first_name: Tommaso
full_name: Costanzo, Tommaso
id: D93824F4-D9BA-11E9-BB12-F207E6697425
last_name: Costanzo
orcid: 0000-0001-9732-3815
- first_name: Tobias
full_name: Kleinhanns, Tobias
id: 8BD9DE16-AB3C-11E9-9C8C-2A03E6697425
last_name: Kleinhanns
- first_name: Seungho
full_name: Lee, Seungho
id: BB243B88-D767-11E9-B658-BC13E6697425
last_name: Lee
orcid: 0000-0002-6962-8598
- first_name: Jordi
full_name: Llorca, Jordi
last_name: Llorca
- first_name: Oana
full_name: Cojocaru‐Mirédin, Oana
last_name: Cojocaru‐Mirédin
- first_name: Maria
full_name: Ibáñez, Maria
id: 43C61214-F248-11E8-B48F-1D18A9856A87
last_name: Ibáñez
orcid: 0000-0001-5013-2843
citation:
ama: 'Liu Y, Calcabrini M, Yu Y, et al. The importance of surface adsorbates in
solution‐processed thermoelectric materials: The case of SnSe. Advanced Materials.
2021;33(52). doi:10.1002/adma.202106858'
apa: 'Liu, Y., Calcabrini, M., Yu, Y., Genç, A., Chang, C., Costanzo, T., … Ibáñez,
M. (2021). The importance of surface adsorbates in solution‐processed thermoelectric
materials: The case of SnSe. Advanced Materials. Wiley. https://doi.org/10.1002/adma.202106858'
chicago: 'Liu, Yu, Mariano Calcabrini, Yuan Yu, Aziz Genç, Cheng Chang, Tommaso
Costanzo, Tobias Kleinhanns, et al. “The Importance of Surface Adsorbates in Solution‐processed
Thermoelectric Materials: The Case of SnSe.” Advanced Materials. Wiley,
2021. https://doi.org/10.1002/adma.202106858.'
ieee: 'Y. Liu et al., “The importance of surface adsorbates in solution‐processed
thermoelectric materials: The case of SnSe,” Advanced Materials, vol. 33,
no. 52. Wiley, 2021.'
ista: 'Liu Y, Calcabrini M, Yu Y, Genç A, Chang C, Costanzo T, Kleinhanns T, Lee
S, Llorca J, Cojocaru‐Mirédin O, Ibáñez M. 2021. The importance of surface adsorbates
in solution‐processed thermoelectric materials: The case of SnSe. Advanced Materials.
33(52), 2106858.'
mla: 'Liu, Yu, et al. “The Importance of Surface Adsorbates in Solution‐processed
Thermoelectric Materials: The Case of SnSe.” Advanced Materials, vol. 33,
no. 52, 2106858, Wiley, 2021, doi:10.1002/adma.202106858.'
short: Y. Liu, M. Calcabrini, Y. Yu, A. Genç, C. Chang, T. Costanzo, T. Kleinhanns,
S. Lee, J. Llorca, O. Cojocaru‐Mirédin, M. Ibáñez, Advanced Materials 33 (2021).
date_created: 2021-10-11T20:07:24Z
date_published: 2021-12-29T00:00:00Z
date_updated: 2023-08-14T07:25:27Z
day: '29'
ddc:
- '620'
department:
- _id: EM-Fac
- _id: MaIb
doi: 10.1002/adma.202106858
ec_funded: 1
external_id:
isi:
- '000709899300001'
pmid:
- '34626034'
file:
- access_level: open_access
checksum: 990bccc527c64d85cf1c97885110b5f4
content_type: application/pdf
creator: cchlebak
date_created: 2022-02-03T13:16:14Z
date_updated: 2022-02-03T13:16:14Z
file_id: '10720'
file_name: 2021_AdvancedMaterials_Liu.pdf
file_size: 5595666
relation: main_file
success: 1
file_date_updated: 2022-02-03T13:16:14Z
has_accepted_license: '1'
intvolume: ' 33'
isi: 1
issue: '52'
keyword:
- mechanical engineering
- mechanics of materials
- general materials science
language:
- iso: eng
month: '12'
oa: 1
oa_version: Published Version
pmid: 1
project:
- _id: 2564DBCA-B435-11E9-9278-68D0E5697425
call_identifier: H2020
grant_number: '665385'
name: International IST Doctoral Program
- _id: 260C2330-B435-11E9-9278-68D0E5697425
call_identifier: H2020
grant_number: '754411'
name: ISTplus - Postdoctoral Fellowships
- _id: 9B8804FC-BA93-11EA-9121-9846C619BF3A
grant_number: M02889
name: Bottom-up Engineering for Thermoelectric Applications
- _id: 9B8F7476-BA93-11EA-9121-9846C619BF3A
name: 'HighTE: The Werner Siemens Laboratory for the High Throughput Discovery of
Semiconductors for Waste Heat Recovery'
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
related_material:
record:
- id: '12885'
relation: dissertation_contains
status: public
scopus_import: '1'
status: public
title: 'The importance of surface adsorbates in solution‐processed thermoelectric
materials: The case of SnSe'
tmp:
image: /images/cc_by.png
legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 33
year: '2021'
...
---
_id: '7541'
abstract:
- lang: eng
text: Semiconductor nanowires have been playing a crucial role in the development
of nanoscale devices for the realization of spin qubits, Majorana fermions, single
photon emitters, nanoprocessors, etc. The monolithic growth of site‐controlled
nanowires is a prerequisite toward the next generation of devices that will require
addressability and scalability. Here, combining top‐down nanofabrication and bottom‐up
self‐assembly, the growth of Ge wires on prepatterned Si (001) substrates with
controllable position, distance, length, and structure is reported. This is achieved
by a novel growth process that uses a SiGe strain‐relaxation template and can
be potentially generalized to other material combinations. Transport measurements
show an electrically tunable spin–orbit coupling, with a spin–orbit length similar
to that of III–V materials. Also, charge sensing between quantum dots in closely
spaced wires is observed, which underlines their potential for the realization
of advanced quantum devices. The reported results open a path toward scalable
qubit devices using nanowires on silicon.
acknowledged_ssus:
- _id: NanoFab
- _id: M-Shop
acknowledgement: 'This work was supported by the National Key R&D Program of China
(Grant Nos. 2016YFA0301701 and 2016YFA0300600), the NSFC (Grant Nos. 11574356, 11434010,
and 11404252), the Strategic Priority Research Program of CAS (Grant No. XDB30000000),
the ERC Starting Grant No. 335497, the FWF P32235 project, and the European Union''s
Horizon 2020 research and innovation program under Grant Agreement #862046. This
research was supported by the Scientific Service Units of IST Austria through resources
provided by the MIBA Machine Shop and the nanofabrication facility. F.L. thanks
support from DOE (Grant No. DE‐FG02‐04ER46148). H.H. thanks the Startup Funding
from Xi''an Jiaotong University.'
article_number: '1906523'
article_processing_charge: Yes (via OA deal)
article_type: original
author:
- first_name: Fei
full_name: Gao, Fei
last_name: Gao
- first_name: Jian-Huan
full_name: Wang, Jian-Huan
last_name: Wang
- first_name: Hannes
full_name: Watzinger, Hannes
id: 35DF8E50-F248-11E8-B48F-1D18A9856A87
last_name: Watzinger
- first_name: Hao
full_name: Hu, Hao
last_name: Hu
- first_name: Marko J.
full_name: Rančić, Marko J.
last_name: Rančić
- first_name: Jie-Yin
full_name: Zhang, Jie-Yin
last_name: Zhang
- first_name: Ting
full_name: Wang, Ting
last_name: Wang
- first_name: Yuan
full_name: Yao, Yuan
last_name: Yao
- first_name: Gui-Lei
full_name: Wang, Gui-Lei
last_name: Wang
- first_name: Josip
full_name: Kukucka, Josip
id: 3F5D8856-F248-11E8-B48F-1D18A9856A87
last_name: Kukucka
- first_name: Lada
full_name: Vukušić, Lada
id: 31E9F056-F248-11E8-B48F-1D18A9856A87
last_name: Vukušić
orcid: 0000-0003-2424-8636
- first_name: Christoph
full_name: Kloeffel, Christoph
last_name: Kloeffel
- first_name: Daniel
full_name: Loss, Daniel
last_name: Loss
- first_name: Feng
full_name: Liu, Feng
last_name: Liu
- first_name: Georgios
full_name: Katsaros, Georgios
id: 38DB5788-F248-11E8-B48F-1D18A9856A87
last_name: Katsaros
orcid: 0000-0001-8342-202X
- first_name: Jian-Jun
full_name: Zhang, Jian-Jun
last_name: Zhang
citation:
ama: Gao F, Wang J-H, Watzinger H, et al. Site-controlled uniform Ge/Si hut wires
with electrically tunable spin-orbit coupling. Advanced Materials. 2020;32(16).
doi:10.1002/adma.201906523
apa: Gao, F., Wang, J.-H., Watzinger, H., Hu, H., Rančić, M. J., Zhang, J.-Y., …
Zhang, J.-J. (2020). Site-controlled uniform Ge/Si hut wires with electrically
tunable spin-orbit coupling. Advanced Materials. Wiley. https://doi.org/10.1002/adma.201906523
chicago: Gao, Fei, Jian-Huan Wang, Hannes Watzinger, Hao Hu, Marko J. Rančić, Jie-Yin
Zhang, Ting Wang, et al. “Site-Controlled Uniform Ge/Si Hut Wires with Electrically
Tunable Spin-Orbit Coupling.” Advanced Materials. Wiley, 2020. https://doi.org/10.1002/adma.201906523.
ieee: F. Gao et al., “Site-controlled uniform Ge/Si hut wires with electrically
tunable spin-orbit coupling,” Advanced Materials, vol. 32, no. 16. Wiley,
2020.
ista: Gao F, Wang J-H, Watzinger H, Hu H, Rančić MJ, Zhang J-Y, Wang T, Yao Y, Wang
G-L, Kukucka J, Vukušić L, Kloeffel C, Loss D, Liu F, Katsaros G, Zhang J-J. 2020.
Site-controlled uniform Ge/Si hut wires with electrically tunable spin-orbit coupling.
Advanced Materials. 32(16), 1906523.
mla: Gao, Fei, et al. “Site-Controlled Uniform Ge/Si Hut Wires with Electrically
Tunable Spin-Orbit Coupling.” Advanced Materials, vol. 32, no. 16, 1906523,
Wiley, 2020, doi:10.1002/adma.201906523.
short: F. Gao, J.-H. Wang, H. Watzinger, H. Hu, M.J. Rančić, J.-Y. Zhang, T. Wang,
Y. Yao, G.-L. Wang, J. Kukucka, L. Vukušić, C. Kloeffel, D. Loss, F. Liu, G. Katsaros,
J.-J. Zhang, Advanced Materials 32 (2020).
date_created: 2020-02-28T09:47:00Z
date_published: 2020-04-23T00:00:00Z
date_updated: 2024-02-21T12:42:12Z
day: '23'
ddc:
- '530'
department:
- _id: GeKa
doi: 10.1002/adma.201906523
ec_funded: 1
external_id:
isi:
- '000516660900001'
file:
- access_level: open_access
checksum: c622737dc295972065782558337124a2
content_type: application/pdf
creator: dernst
date_created: 2020-11-20T10:11:35Z
date_updated: 2020-11-20T10:11:35Z
file_id: '8782'
file_name: 2020_AdvancedMaterials_Gao.pdf
file_size: 5242880
relation: main_file
success: 1
file_date_updated: 2020-11-20T10:11:35Z
has_accepted_license: '1'
intvolume: ' 32'
isi: 1
issue: '16'
language:
- iso: eng
month: '04'
oa: 1
oa_version: Published Version
project:
- _id: 25517E86-B435-11E9-9278-68D0E5697425
call_identifier: FP7
grant_number: '335497'
name: Towards Spin qubits and Majorana fermions in Germanium selfassembled hut-wires
- _id: 237B3DA4-32DE-11EA-91FC-C7463DDC885E
call_identifier: FWF
grant_number: P32235
name: Towards scalable hut wire quantum devices
- _id: 237E5020-32DE-11EA-91FC-C7463DDC885E
call_identifier: H2020
grant_number: '862046'
name: TOPOLOGICALLY PROTECTED AND SCALABLE QUANTUM BITS
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
related_material:
record:
- id: '7996'
relation: dissertation_contains
status: public
- id: '9222'
relation: research_data
status: public
scopus_import: '1'
status: public
title: Site-controlled uniform Ge/Si hut wires with electrically tunable spin-orbit
coupling
tmp:
image: /images/cc_by.png
legal_code_url: https://creativecommons.org/licenses/by/4.0/legalcode
name: Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)
short: CC BY (4.0)
type: journal_article
user_id: 4359f0d1-fa6c-11eb-b949-802e58b17ae8
volume: 32
year: '2020'
...
---
_id: '13366'
abstract:
- lang: eng
text: The ability to reversibly assemble nanoparticles using light is both fundamentally
interesting and important for applications ranging from reversible data storage
to controlled drug delivery. Here, the diverse approaches that have so far been
developed to control the self-assembly of nanoparticles using light are reviewed
and compared. These approaches include functionalizing nanoparticles with monolayers
of photoresponsive molecules, placing them in photoresponsive media capable of
reversibly protonating the particles under light, and decorating plasmonic nanoparticles
with thermoresponsive polymers, to name just a few. The applicability of these
methods to larger, micrometer-sized particles is also discussed. Finally, several
perspectives on further developments in the field are offered.
article_number: '1905866'
article_processing_charge: No
article_type: original
author:
- first_name: Tong
full_name: Bian, Tong
last_name: Bian
- first_name: Zonglin
full_name: Chu, Zonglin
last_name: Chu
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
citation:
ama: Bian T, Chu Z, Klajn R. The many ways to assemble nanoparticles using light.
Advanced Materials. 2019;32(20). doi:10.1002/adma.201905866
apa: Bian, T., Chu, Z., & Klajn, R. (2019). The many ways to assemble nanoparticles
using light. Advanced Materials. Wiley. https://doi.org/10.1002/adma.201905866
chicago: Bian, Tong, Zonglin Chu, and Rafal Klajn. “The Many Ways to Assemble Nanoparticles
Using Light.” Advanced Materials. Wiley, 2019. https://doi.org/10.1002/adma.201905866.
ieee: T. Bian, Z. Chu, and R. Klajn, “The many ways to assemble nanoparticles using
light,” Advanced Materials, vol. 32, no. 20. Wiley, 2019.
ista: Bian T, Chu Z, Klajn R. 2019. The many ways to assemble nanoparticles using
light. Advanced Materials. 32(20), 1905866.
mla: Bian, Tong, et al. “The Many Ways to Assemble Nanoparticles Using Light.” Advanced
Materials, vol. 32, no. 20, 1905866, Wiley, 2019, doi:10.1002/adma.201905866.
short: T. Bian, Z. Chu, R. Klajn, Advanced Materials 32 (2019).
date_created: 2023-08-01T09:37:26Z
date_published: 2019-11-19T00:00:00Z
date_updated: 2023-08-07T10:23:41Z
day: '19'
doi: 10.1002/adma.201905866
extern: '1'
external_id:
pmid:
- '31709655'
intvolume: ' 32'
issue: '20'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '11'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: The many ways to assemble nanoparticles using light
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 32
year: '2019'
...
---
_id: '5990'
abstract:
- lang: eng
text: 'A Ge–Si core–shell nanowire is used to realize a Josephson field‐effect transistor
with highly transparent contacts to superconducting leads. By changing the electric
field, access to two distinct regimes, not combined before in a single device,
is gained: in the accumulation mode the device is highly transparent and the supercurrent
is carried by multiple subbands, while near depletion, the supercurrent is carried
by single‐particle levels of a strongly coupled quantum dot operating in the few‐hole
regime. These results establish Ge–Si nanowires as an important platform for hybrid
superconductor–semiconductor physics and Majorana fermions.'
article_number: '1802257'
article_processing_charge: No
arxiv: 1
author:
- first_name: Joost
full_name: Ridderbos, Joost
last_name: Ridderbos
- first_name: Matthias
full_name: Brauns, Matthias
id: 33F94E3C-F248-11E8-B48F-1D18A9856A87
last_name: Brauns
- first_name: Jie
full_name: Shen, Jie
last_name: Shen
- first_name: Folkert K.
full_name: de Vries, Folkert K.
last_name: de Vries
- first_name: Ang
full_name: Li, Ang
last_name: Li
- first_name: Erik P. A. M.
full_name: Bakkers, Erik P. A. M.
last_name: Bakkers
- first_name: Alexander
full_name: Brinkman, Alexander
last_name: Brinkman
- first_name: Floris A.
full_name: Zwanenburg, Floris A.
last_name: Zwanenburg
citation:
ama: Ridderbos J, Brauns M, Shen J, et al. Josephson effect in a few-hole quantum
dot. Advanced Materials. 2018;30(44). doi:10.1002/adma.201802257
apa: Ridderbos, J., Brauns, M., Shen, J., de Vries, F. K., Li, A., Bakkers, E. P.
A. M., … Zwanenburg, F. A. (2018). Josephson effect in a few-hole quantum dot.
Advanced Materials. Wiley. https://doi.org/10.1002/adma.201802257
chicago: Ridderbos, Joost, Matthias Brauns, Jie Shen, Folkert K. de Vries, Ang Li,
Erik P. A. M. Bakkers, Alexander Brinkman, and Floris A. Zwanenburg. “Josephson
Effect in a Few-Hole Quantum Dot.” Advanced Materials. Wiley, 2018. https://doi.org/10.1002/adma.201802257.
ieee: J. Ridderbos et al., “Josephson effect in a few-hole quantum dot,”
Advanced Materials, vol. 30, no. 44. Wiley, 2018.
ista: Ridderbos J, Brauns M, Shen J, de Vries FK, Li A, Bakkers EPAM, Brinkman A,
Zwanenburg FA. 2018. Josephson effect in a few-hole quantum dot. Advanced Materials.
30(44), 1802257.
mla: Ridderbos, Joost, et al. “Josephson Effect in a Few-Hole Quantum Dot.” Advanced
Materials, vol. 30, no. 44, 1802257, Wiley, 2018, doi:10.1002/adma.201802257.
short: J. Ridderbos, M. Brauns, J. Shen, F.K. de Vries, A. Li, E.P.A.M. Bakkers,
A. Brinkman, F.A. Zwanenburg, Advanced Materials 30 (2018).
date_created: 2019-02-14T12:14:26Z
date_published: 2018-11-02T00:00:00Z
date_updated: 2023-09-19T14:29:58Z
day: '02'
department:
- _id: GeKa
doi: 10.1002/adma.201802257
external_id:
arxiv:
- '1809.08487'
isi:
- '000450232800015'
intvolume: ' 30'
isi: 1
issue: '44'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/abs/1809.08487
month: '11'
oa: 1
oa_version: Preprint
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Josephson effect in a few-hole quantum dot
type: journal_article
user_id: c635000d-4b10-11ee-a964-aac5a93f6ac1
volume: 30
year: '2018'
...
---
_id: '13375'
abstract:
- lang: eng
text: 'Dissipative self-assembly leads to structures and materials that exist away
from equilibrium by continuously exchanging energy and materials with the external
environment. Although this mode of self-assembly is ubiquitous in nature, where
it gives rise to functions such as signal processing, motility, self-healing,
self-replication, and ultimately life, examples of dissipative self-assembly processes
in man-made systems are few and far between. Herein, recent progress in developing
diverse synthetic dissipative self-assembly systems is discussed. The systems
reported thus far can be categorized into three classes, in which: i) the fuel
chemically modifies the building blocks, thus triggering their self-assembly,
ii) the fuel acts as a template interacting with the building blocks noncovalently,
and iii) transient states are induced by the addition of two mutually exclusive
stimuli. These early studies give rise to materials that would be difficult to
obtain otherwise, including hydrogels with programmable lifetimes, vesicular nanoreactors,
and membranes exhibiting transient conductivity.'
article_number: '1706750'
article_processing_charge: No
article_type: original
author:
- first_name: Soumen
full_name: De, Soumen
last_name: De
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
citation:
ama: De S, Klajn R. Dissipative self-assembly driven by the consumption of chemical
fuels. Advanced Materials. 2018;30(41). doi:10.1002/adma.201706750
apa: De, S., & Klajn, R. (2018). Dissipative self-assembly driven by the consumption
of chemical fuels. Advanced Materials. Wiley. https://doi.org/10.1002/adma.201706750
chicago: De, Soumen, and Rafal Klajn. “Dissipative Self-Assembly Driven by the Consumption
of Chemical Fuels.” Advanced Materials. Wiley, 2018. https://doi.org/10.1002/adma.201706750.
ieee: S. De and R. Klajn, “Dissipative self-assembly driven by the consumption of
chemical fuels,” Advanced Materials, vol. 30, no. 41. Wiley, 2018.
ista: De S, Klajn R. 2018. Dissipative self-assembly driven by the consumption of
chemical fuels. Advanced Materials. 30(41), 1706750.
mla: De, Soumen, and Rafal Klajn. “Dissipative Self-Assembly Driven by the Consumption
of Chemical Fuels.” Advanced Materials, vol. 30, no. 41, 1706750, Wiley,
2018, doi:10.1002/adma.201706750.
short: S. De, R. Klajn, Advanced Materials 30 (2018).
date_created: 2023-08-01T09:39:46Z
date_published: 2018-10-11T00:00:00Z
date_updated: 2023-08-07T10:56:26Z
day: '11'
doi: 10.1002/adma.201706750
extern: '1'
external_id:
pmid:
- '29520846'
intvolume: ' 30'
issue: '41'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '10'
oa_version: None
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Dissipative self-assembly driven by the consumption of chemical fuels
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 30
year: '2018'
...
---
_id: '9066'
abstract:
- lang: eng
text: The novel electronic state of the canted antiferromagnetic (AFM) insulator,
strontium iridate (Sr2IrO4) has been well described by the spin-orbit-entangled
isospin Jeff = 1/2, but the role of isospin in transport phenomena remains poorly
understood. In this study, antiferromagnet-based spintronic functionality is demonstrated
by combining unique characteristics of the isospin state in Sr2IrO4. Based on
magnetic and transport measurements, large and highly anisotropic magnetoresistance
(AMR) is obtained by manipulating the antiferromagnetic isospin domains. First-principles
calculations suggest that electrons whose isospin directions are strongly coupled
to in-plane net magnetic moment encounter the isospin mismatch when moving across
antiferromagnetic domain boundaries, which generates a high resistance state.
By rotating a magnetic field that aligns in-plane net moments and removes domain
boundaries, the macroscopically-ordered isospins govern dynamic transport through
the system, which leads to the extremely angle-sensitive AMR. As with this work
that establishes a link between isospins and magnetotransport in strongly spin-orbit-coupled
AFM Sr2IrO4, the peculiar AMR effect provides a beneficial foundation for fundamental
and applied research on AFM spintronics.
article_number: '1805564'
article_processing_charge: No
article_type: original
arxiv: 1
author:
- first_name: Nara
full_name: Lee, Nara
last_name: Lee
- first_name: Eunjung
full_name: Ko, Eunjung
last_name: Ko
- first_name: Hwan Young
full_name: Choi, Hwan Young
last_name: Choi
- first_name: Yun Jeong
full_name: Hong, Yun Jeong
last_name: Hong
- first_name: Muhammad
full_name: Nauman, Muhammad
id: 32c21954-2022-11eb-9d5f-af9f93c24e71
last_name: Nauman
orcid: 0000-0002-2111-4846
- first_name: Woun
full_name: Kang, Woun
last_name: Kang
- first_name: Hyoung Joon
full_name: Choi, Hyoung Joon
last_name: Choi
- first_name: Young Jai
full_name: Choi, Young Jai
last_name: Choi
- first_name: Younjung
full_name: Jo, Younjung
last_name: Jo
citation:
ama: Lee N, Ko E, Choi HY, et al. Antiferromagnet‐based spintronic functionality
by controlling isospin domains in a layered perovskite iridate. Advanced Materials.
2018;30(52). doi:10.1002/adma.201805564
apa: Lee, N., Ko, E., Choi, H. Y., Hong, Y. J., Nauman, M., Kang, W., … Jo, Y. (2018).
Antiferromagnet‐based spintronic functionality by controlling isospin domains
in a layered perovskite iridate. Advanced Materials. Wiley. https://doi.org/10.1002/adma.201805564
chicago: Lee, Nara, Eunjung Ko, Hwan Young Choi, Yun Jeong Hong, Muhammad Nauman,
Woun Kang, Hyoung Joon Choi, Young Jai Choi, and Younjung Jo. “Antiferromagnet‐based
Spintronic Functionality by Controlling Isospin Domains in a Layered Perovskite
Iridate.” Advanced Materials. Wiley, 2018. https://doi.org/10.1002/adma.201805564.
ieee: N. Lee et al., “Antiferromagnet‐based spintronic functionality by controlling
isospin domains in a layered perovskite iridate,” Advanced Materials, vol.
30, no. 52. Wiley, 2018.
ista: Lee N, Ko E, Choi HY, Hong YJ, Nauman M, Kang W, Choi HJ, Choi YJ, Jo Y. 2018.
Antiferromagnet‐based spintronic functionality by controlling isospin domains
in a layered perovskite iridate. Advanced Materials. 30(52), 1805564.
mla: Lee, Nara, et al. “Antiferromagnet‐based Spintronic Functionality by Controlling
Isospin Domains in a Layered Perovskite Iridate.” Advanced Materials, vol.
30, no. 52, 1805564, Wiley, 2018, doi:10.1002/adma.201805564.
short: N. Lee, E. Ko, H.Y. Choi, Y.J. Hong, M. Nauman, W. Kang, H.J. Choi, Y.J.
Choi, Y. Jo, Advanced Materials 30 (2018).
date_created: 2021-02-02T15:50:58Z
date_published: 2018-10-29T00:00:00Z
date_updated: 2021-02-03T13:58:39Z
day: '29'
doi: 10.1002/adma.201805564
extern: '1'
external_id:
arxiv:
- '1811.04562'
intvolume: ' 30'
issue: '52'
keyword:
- Mechanical Engineering
- General Materials Science
- Mechanics of Materials
language:
- iso: eng
month: '10'
oa_version: Preprint
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
- 1521-4095
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Antiferromagnet‐based spintronic functionality by controlling isospin domains
in a layered perovskite iridate
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 30
year: '2018'
...
---
_id: '13406'
abstract:
- lang: eng
text: Dual-responsive nanoparticles are designed by functionalizing magnetic cores
with light-responsive ligands. These materials respond to both light and magnetic
fields and can be assembled into various higher-order structures, depending on
the relative contributions of these two stimuli.
article_processing_charge: No
article_type: original
author:
- first_name: Sanjib
full_name: Das, Sanjib
last_name: Das
- first_name: Priyadarshi
full_name: Ranjan, Priyadarshi
last_name: Ranjan
- first_name: Pradipta Sankar
full_name: Maiti, Pradipta Sankar
last_name: Maiti
- first_name: Gurvinder
full_name: Singh, Gurvinder
last_name: Singh
- first_name: Gregory
full_name: Leitus, Gregory
last_name: Leitus
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
citation:
ama: Das S, Ranjan P, Maiti PS, Singh G, Leitus G, Klajn R. Dual-responsive nanoparticles
and their self-assembly. Advanced Materials. 2013;25(3):422-426. doi:10.1002/adma.201201734
apa: Das, S., Ranjan, P., Maiti, P. S., Singh, G., Leitus, G., & Klajn, R. (2013).
Dual-responsive nanoparticles and their self-assembly. Advanced Materials.
Wiley. https://doi.org/10.1002/adma.201201734
chicago: Das, Sanjib, Priyadarshi Ranjan, Pradipta Sankar Maiti, Gurvinder Singh,
Gregory Leitus, and Rafal Klajn. “Dual-Responsive Nanoparticles and Their Self-Assembly.”
Advanced Materials. Wiley, 2013. https://doi.org/10.1002/adma.201201734.
ieee: S. Das, P. Ranjan, P. S. Maiti, G. Singh, G. Leitus, and R. Klajn, “Dual-responsive
nanoparticles and their self-assembly,” Advanced Materials, vol. 25, no.
3. Wiley, pp. 422–426, 2013.
ista: Das S, Ranjan P, Maiti PS, Singh G, Leitus G, Klajn R. 2013. Dual-responsive
nanoparticles and their self-assembly. Advanced Materials. 25(3), 422–426.
mla: Das, Sanjib, et al. “Dual-Responsive Nanoparticles and Their Self-Assembly.”
Advanced Materials, vol. 25, no. 3, Wiley, 2013, pp. 422–26, doi:10.1002/adma.201201734.
short: S. Das, P. Ranjan, P.S. Maiti, G. Singh, G. Leitus, R. Klajn, Advanced Materials
25 (2013) 422–426.
date_created: 2023-08-01T09:47:30Z
date_published: 2013-01-18T00:00:00Z
date_updated: 2023-08-08T07:49:36Z
day: '18'
doi: 10.1002/adma.201201734
extern: '1'
external_id:
pmid:
- '22933327'
intvolume: ' 25'
issue: '3'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '01'
oa_version: None
page: 422-426
pmid: 1
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Dual-responsive nanoparticles and their self-assembly
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 25
year: '2013'
...
---
_id: '13419'
abstract:
- lang: eng
text: Reaction-diffusion (RD) processes initiated from the surfaces of mesoscopic
particles can fabricate complex core-and-shell structures. The propagation of
a sharp RD front selectively removes metal colloids or nanoparticles from the
supporting gel or polymer matrix. Once fabricated, the core structures can be
processed “remotely” via galvanic replacement reactions, and the composite particles
can be assembled into open-lattice crystals.
article_processing_charge: No
article_type: original
author:
- first_name: Paul J.
full_name: Wesson, Paul J.
last_name: Wesson
- first_name: Siowling
full_name: Soh, Siowling
last_name: Soh
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
- first_name: Kyle J. M.
full_name: Bishop, Kyle J. M.
last_name: Bishop
- first_name: Timothy P.
full_name: Gray, Timothy P.
last_name: Gray
- first_name: Bartosz A.
full_name: Grzybowski, Bartosz A.
last_name: Grzybowski
citation:
ama: 'Wesson PJ, Soh S, Klajn R, Bishop KJM, Gray TP, Grzybowski BA. “Remote” fabrication
via three-dimensional reaction-diffusion: Making complex core-and-shell particles
and assembling them into open-lattice crystals. Advanced Materials. 2009;21(19):1911-1915.
doi:10.1002/adma.200802964'
apa: 'Wesson, P. J., Soh, S., Klajn, R., Bishop, K. J. M., Gray, T. P., & Grzybowski,
B. A. (2009). “Remote” fabrication via three-dimensional reaction-diffusion: Making
complex core-and-shell particles and assembling them into open-lattice crystals.
Advanced Materials. Wiley. https://doi.org/10.1002/adma.200802964'
chicago: 'Wesson, Paul J., Siowling Soh, Rafal Klajn, Kyle J. M. Bishop, Timothy
P. Gray, and Bartosz A. Grzybowski. “‘Remote’ Fabrication via Three-Dimensional
Reaction-Diffusion: Making Complex Core-and-Shell Particles and Assembling Them
into Open-Lattice Crystals.” Advanced Materials. Wiley, 2009. https://doi.org/10.1002/adma.200802964.'
ieee: 'P. J. Wesson, S. Soh, R. Klajn, K. J. M. Bishop, T. P. Gray, and B. A. Grzybowski,
“‘Remote’ fabrication via three-dimensional reaction-diffusion: Making complex
core-and-shell particles and assembling them into open-lattice crystals,” Advanced
Materials, vol. 21, no. 19. Wiley, pp. 1911–1915, 2009.'
ista: 'Wesson PJ, Soh S, Klajn R, Bishop KJM, Gray TP, Grzybowski BA. 2009. “Remote”
fabrication via three-dimensional reaction-diffusion: Making complex core-and-shell
particles and assembling them into open-lattice crystals. Advanced Materials.
21(19), 1911–1915.'
mla: 'Wesson, Paul J., et al. “‘Remote’ Fabrication via Three-Dimensional Reaction-Diffusion:
Making Complex Core-and-Shell Particles and Assembling Them into Open-Lattice
Crystals.” Advanced Materials, vol. 21, no. 19, Wiley, 2009, pp. 1911–15,
doi:10.1002/adma.200802964.'
short: P.J. Wesson, S. Soh, R. Klajn, K.J.M. Bishop, T.P. Gray, B.A. Grzybowski,
Advanced Materials 21 (2009) 1911–1915.
date_created: 2023-08-01T10:30:04Z
date_published: 2009-05-18T00:00:00Z
date_updated: 2023-08-08T09:04:07Z
day: '18'
doi: 10.1002/adma.200802964
extern: '1'
intvolume: ' 21'
issue: '19'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '05'
oa_version: None
page: 1911-1915
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: '“Remote” fabrication via three-dimensional reaction-diffusion: Making complex
core-and-shell particles and assembling them into open-lattice crystals'
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 21
year: '2009'
...
---
_id: '13431'
abstract:
- lang: eng
text: 'Hydrogel stamps can microstructure solid surfaces, i.e., modify the surface
topology of metals, glasses, and crystals. It is demonstrated that stamps soaked
in an appropriate etchant can remove material with micrometer-scale precision.
The Figure shows an array of concentric circles etched in glass using the immersion
wet stamping process described (scale bar: 500 μm).'
article_processing_charge: No
article_type: original
author:
- first_name: S. K.
full_name: Smoukov, S. K.
last_name: Smoukov
- first_name: K. J. M.
full_name: Bishop, K. J. M.
last_name: Bishop
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
- first_name: C. J.
full_name: Campbell, C. J.
last_name: Campbell
- first_name: B. A.
full_name: Grzybowski, B. A.
last_name: Grzybowski
citation:
ama: Smoukov SK, Bishop KJM, Klajn R, Campbell CJ, Grzybowski BA. Cutting into solids
with micropatterned gels. Advanced Materials. 2005;17(11):1361-1365. doi:10.1002/adma.200402086
apa: Smoukov, S. K., Bishop, K. J. M., Klajn, R., Campbell, C. J., & Grzybowski,
B. A. (2005). Cutting into solids with micropatterned gels. Advanced Materials.
Wiley. https://doi.org/10.1002/adma.200402086
chicago: Smoukov, S. K., K. J. M. Bishop, Rafal Klajn, C. J. Campbell, and B. A.
Grzybowski. “Cutting into Solids with Micropatterned Gels.” Advanced Materials.
Wiley, 2005. https://doi.org/10.1002/adma.200402086.
ieee: S. K. Smoukov, K. J. M. Bishop, R. Klajn, C. J. Campbell, and B. A. Grzybowski,
“Cutting into solids with micropatterned gels,” Advanced Materials, vol.
17, no. 11. Wiley, pp. 1361–1365, 2005.
ista: Smoukov SK, Bishop KJM, Klajn R, Campbell CJ, Grzybowski BA. 2005. Cutting
into solids with micropatterned gels. Advanced Materials. 17(11), 1361–1365.
mla: Smoukov, S. K., et al. “Cutting into Solids with Micropatterned Gels.” Advanced
Materials, vol. 17, no. 11, Wiley, 2005, pp. 1361–65, doi:10.1002/adma.200402086.
short: S.K. Smoukov, K.J.M. Bishop, R. Klajn, C.J. Campbell, B.A. Grzybowski, Advanced
Materials 17 (2005) 1361–1365.
date_created: 2023-08-01T10:38:01Z
date_published: 2005-06-24T00:00:00Z
date_updated: 2023-08-08T11:53:16Z
day: '24'
doi: 10.1002/adma.200402086
extern: '1'
external_id:
pmid:
- '34412440'
intvolume: ' 17'
issue: '11'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '06'
oa_version: None
page: 1361-1365
pmid: 1
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Cutting into solids with micropatterned gels
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 17
year: '2005'
...
---
_id: '13434'
abstract:
- lang: eng
text: Thin films of ionically doped gelatin have been color-patterned with submicrometer
precision using the wet-stamping technique. Inorganic salts are delivered onto
the gelatin surface from an agarose stamp, and diffuse into the gelatine layer,
producting deeply colored precipitates. Reaction fronts originating from different
features of the stamp cease within < 1 μm of each other, leaving sharp, transparent
regions in between.
article_processing_charge: No
article_type: original
author:
- first_name: C. J.
full_name: Campbell, C. J.
last_name: Campbell
- first_name: M.
full_name: Fialkowski, M.
last_name: Fialkowski
- first_name: Rafal
full_name: Klajn, Rafal
id: 8e84690e-1e48-11ed-a02b-a1e6fb8bb53b
last_name: Klajn
- first_name: I. T.
full_name: Bensemann, I. T.
last_name: Bensemann
- first_name: B. A.
full_name: Grzybowski, B. A.
last_name: Grzybowski
citation:
ama: Campbell CJ, Fialkowski M, Klajn R, Bensemann IT, Grzybowski BA. Color micro-
and nanopatterning with counter-propagating reaction-diffusion fronts. Advanced
Materials. 2004;16(21):1912-1917. doi:10.1002/adma.200400383
apa: Campbell, C. J., Fialkowski, M., Klajn, R., Bensemann, I. T., & Grzybowski,
B. A. (2004). Color micro- and nanopatterning with counter-propagating reaction-diffusion
fronts. Advanced Materials. Wiley. https://doi.org/10.1002/adma.200400383
chicago: Campbell, C. J., M. Fialkowski, Rafal Klajn, I. T. Bensemann, and B. A.
Grzybowski. “Color Micro- and Nanopatterning with Counter-Propagating Reaction-Diffusion
Fronts.” Advanced Materials. Wiley, 2004. https://doi.org/10.1002/adma.200400383.
ieee: C. J. Campbell, M. Fialkowski, R. Klajn, I. T. Bensemann, and B. A. Grzybowski,
“Color micro- and nanopatterning with counter-propagating reaction-diffusion fronts,”
Advanced Materials, vol. 16, no. 21. Wiley, pp. 1912–1917, 2004.
ista: Campbell CJ, Fialkowski M, Klajn R, Bensemann IT, Grzybowski BA. 2004. Color
micro- and nanopatterning with counter-propagating reaction-diffusion fronts.
Advanced Materials. 16(21), 1912–1917.
mla: Campbell, C. J., et al. “Color Micro- and Nanopatterning with Counter-Propagating
Reaction-Diffusion Fronts.” Advanced Materials, vol. 16, no. 21, Wiley,
2004, pp. 1912–17, doi:10.1002/adma.200400383.
short: C.J. Campbell, M. Fialkowski, R. Klajn, I.T. Bensemann, B.A. Grzybowski,
Advanced Materials 16 (2004) 1912–1917.
date_created: 2023-08-01T10:39:09Z
date_published: 2004-11-14T00:00:00Z
date_updated: 2023-08-08T12:41:23Z
day: '14'
doi: 10.1002/adma.200400383
extern: '1'
intvolume: ' 16'
issue: '21'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
month: '11'
oa_version: None
page: 1912-1917
publication: Advanced Materials
publication_identifier:
eissn:
- 1521-4095
issn:
- 0935-9648
publication_status: published
publisher: Wiley
quality_controlled: '1'
scopus_import: '1'
status: public
title: Color micro- and nanopatterning with counter-propagating reaction-diffusion
fronts
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 16
year: '2004'
...